• Advanced
  • About 15 min
  • 5 practice questions

Concentration terms and fast interconversion

Convert between molarity, molality, mole fraction, mass percent and ppm in one line, using density where the problem needs it.

If something looks wrong, please tell us.

Every numerical question on solutions starts with a concentration, and many of them hide a conversion inside: the data give mass percent and density, but the formula you need wants molality or mole fraction. At the advanced level the marks go to the student who converts in one clean line instead of three messy ones. This lesson builds that habit, and the rest of the course depends on it.

The five measures and what each one counts

MeasureDefinitionChanges with temperature?
Mass percent (w/w)mass of solute ÷ mass of solution × 100No
Parts per million (ppm)mass of solute ÷ mass of solution × 10^6No
Mole fraction xmoles of a component ÷ total molesNo
Molality mmoles of solute ÷ kilograms of solventNo
Molarity Mmoles of solute ÷ litres of solutionYes, because volume changes

The key distinction is between terms built on mass and terms built on volume. A liquid expands on heating, so the same solution has a slightly smaller molarity when warm. Molality, mole fraction and mass percent use only masses and moles, so they do not change with temperature. That is why colligative-property formulas use molality.

The conversion recipe

Never memorise a separate formula for every pair. Instead, fix a convenient amount of solution and find three numbers: mass of solute, mass of solvent and volume of solution. If the data are in percent, take 100 g of solution. If the data are in molarity, take 1 L of solution and use the density to get its mass (mass in g = 1000 × density in g/mL). Once you have the three numbers, every measure is one division.

  • Molarity from mass percent: M = (1000 × d × w) ÷ molar mass, where w is the mass fraction and d the density in g/mL.
  • Molality from molarity: take 1 L; solvent mass = 1000d − M × (molar mass of solute) grams; molality = M ÷ (solvent mass in kg).
  • Mole fraction of solute from molality in water: x = m ÷ (m + 55.56), because 1 kg of water is 1000/18 = 55.56 mol.

Worked example 1: concentrated sulphuric acid

A sample of sulphuric acid is 98% H2SO4 by mass with density 1.84 g/mL (molar mass 98 g/mol). Find its molarity and molality. Take 1 L: mass = 1840 g, of which 0.98 × 1840 = 1803.2 g is acid, that is 1803.2 ÷ 98 = 18.4 mol. Molarity = 18.4 M. For molality take 100 g instead: 98 g acid = 1 mol, and 2 g water = 0.002 kg. Molality = 1 ÷ 0.002 = 500 m. The two numbers differ hugely because there is almost no solvent, which is exactly the trap: molarity and molality are close only for dilute aqueous solutions.

Worked example 2: molarity to molality and mole fraction

A 2.0 M NaOH solution (molar mass 40 g/mol) has density 1.12 g/mL. Take 1 L: total mass 1120 g, NaOH = 2 × 40 = 80 g, water = 1120 − 80 = 1040 g = 1.040 kg. Molality = 2 ÷ 1.040 = 1.92 m. Moles of water = 1040 ÷ 18 = 57.78, so the mole fraction of NaOH = 2 ÷ (2 + 57.78) = 2 ÷ 59.78 = 0.0335.

Worked example 3: molality straight to mole fraction

For a 1 molal aqueous solution, 1 mol of solute sits in 1 kg of water, which is 55.56 mol. The mole fraction of solute = 1 ÷ (1 + 55.56) = 0.0177. Remember this pair: it lets you check any answer for a dilute aqueous solution in seconds. A mole fraction near 0.02 means roughly 1 molal.

Fix a convenient amount (100 g if given percent, 1 L if given molarity), find the masses of solute and solvent and the volume, then divide. Molality, mole fraction and mass percent do not change with temperature; molarity does.

Key takeaways: choose the basis that makes the given number easy, use density only to move between volume and mass, and treat 55.56 mol per kilogram of water as a constant you know by heart. A very concentrated solution can have a modest molarity but an enormous molality, so read which one the question wants.

Check your understanding

  1. 1. Which of these concentration terms changes when a solution is warmed?

    1. Mole fraction
    2. Mass percent
    3. Molality
    4. Molarity
    Show answer

    Answer: D. Molarity is moles per litre of solution, and the volume of a liquid increases on heating, so molarity falls slightly. The other three are built only on masses and moles, so they do not change.

  2. 2. 9.8 g of H2SO4 (molar mass 98 g/mol) is dissolved to make 500 mL of solution. What is the molarity?

    1. 0.1 M
    2. 0.2 M
    3. 0.4 M
    4. 0.02 M
    Show answer

    Answer: B. Moles = 9.8 ÷ 98 = 0.1 mol. Volume = 0.5 L. Molarity = 0.1 ÷ 0.5 = 0.2 M.

  3. 3. What is the mole fraction of solute in a 2 molal aqueous solution?

    1. 0.0347
    2. 0.0360
    3. 0.0180
    4. 0.0667
    Show answer

    Answer: A. 1 kg of water = 1000 ÷ 18 = 55.56 mol. x = 2 ÷ (2 + 55.56) = 2 ÷ 57.56 = 0.0347.

  4. 4. Nitric acid is 63% HNO3 by mass with density 1.4 g/mL (molar mass 63 g/mol). What is its molarity?

    1. 10 M
    2. 12 M
    3. 14 M
    4. 16 M
    Show answer

    Answer: C. Take 1 L: mass = 1400 g, HNO3 = 0.63 × 1400 = 882 g = 882 ÷ 63 = 14 mol. Molarity = 14 M. Shortcut: 1000 × 1.4 × 0.63 ÷ 63 = 14.

  5. 5. 0.002 g of a substance is dissolved in 500 g of water. Its concentration is closest to

    1. 0.4 ppm
    2. 4 ppm
    3. 40 ppm
    4. 400 ppm
    Show answer

    Answer: B. ppm = (0.002 ÷ 500.002) × 10^6 ≈ 4 ppm. The solute mass is so small that the solution mass is effectively 500 g.

Privacy · Terms · Refunds · Delivery