• Foundation
  • About 13 min
  • 5 practice questions

More hardware, display and multimedia file abbreviations

Expand CMOS, POST, DMA, MIPS, SATA, DPI, TFT, OLED, BMP, TIFF, WAV, MIDI, AVI and SVG, and do two small calculations with DPI and MIPS.

If something looks wrong, please tell us.

Earlier lessons covered the main hardware and file-format abbreviations. This lesson adds a second layer that appears in longer papers: start-up and speed terms, display types and the multimedia file formats you meet on a phone or computer. The sums that use DPI and MIPS are made up for practice.

System and speed terms

System and speed
Short formFull formMeaning
CMOSComplementary Metal Oxide SemiconductorTechnology for chips; also the small memory that keeps the clock and set-up values using a battery
POSTPower-On Self-TestChecks of the hardware when the computer starts
DMADirect Memory AccessA device moves data to memory without using the CPU for each item
MIPSMillion Instructions Per SecondA measure of processor speed
SATASerial Advanced Technology AttachmentAn interface that connects storage drives to the computer

Display and print terms

Display and print
Short formFull formMeaning
DPIDots Per InchDetail of a print or scan
PPIPixels Per InchDetail of a screen
TFTThin Film TransistorTechnology used in LCD screens
OLEDOrganic Light Emitting DiodeScreen where each pixel gives its own light

Multimedia file formats

Multimedia formats
Short formFull formType of file
BMPBitmapImage
TIFFTagged Image File FormatHigh-quality image
SVGScalable Vector GraphicsImage that stays sharp at any size
WAVWaveform Audio File FormatAudio
MIDIMusical Instrument Digital InterfaceMusic instructions, not recorded sound
AVIAudio Video InterleaveVideo

Worked example 1: DPI sum

A photo of 6 inches by 4 inches is printed at 300 DPI. Dots across = 6 x 300 = 1,800. Dots down = 4 x 300 = 1,200. Total dots = 1,800 x 1,200 = 2,160,000. Doubling the DPI to 600 would multiply the total by 4, because both directions double.

Worked example 2: MIPS sum

A processor works at 50 MIPS (illustrative). How long does it take to run 300 million instructions? 50 MIPS = 50 million instructions per second. Time = 300 / 50 = 6 seconds. A processor of 100 MIPS would take 3 seconds for the same work, half the time.

Worked example 3: pick from the clue

(a) Which term describes the checks a computer makes when you switch it on? POST. (b) Which file format stores instructions for playing notes rather than the sound itself? MIDI. (c) Which image format stays sharp however far you enlarge it? SVG, because vector shapes are described by formulas. (d) Which unit tells the detail of a printed page? DPI.

Clock speed units

The speed of a processor clock is given in hertz (Hz), which is one cycle per second. kHz is kilohertz (1,000 Hz), MHz is megahertz (1,000 kHz) and GHz is gigahertz (1,000 MHz). So 1 GHz = 1,000 MHz = 1,000,000,000 Hz. A 2.5 GHz clock ticks 2.5 x 1,000 = 2,500 million times each second. Do not confuse clock speed with MIPS: clock speed counts ticks, while MIPS counts instructions finished.

POST checks at start-up, DMA bypasses the CPU, MIPS measures speed, DPI measures print detail, MIDI holds notes, SVG scales.

Key takeaways

  • POST runs when the computer starts; CMOS keeps clock and set-up values.
  • DPI is for print, PPI is for screens.
  • SVG is scalable; BMP and TIFF are bitmap-style image formats.
  • MIDI stores music instructions, WAV stores recorded sound.

Check your understanding

  1. 1. What does POST stand for in computing?

    1. Power-Off Safety Test
    2. Power-On Self-Test
    3. Primary Output Signal Test
    4. Program On System Task
    Show answer

    Answer: B. POST is the Power-On Self-Test, the hardware check done at start-up.

  2. 2. A picture of 5 inches by 2 inches is printed at 200 DPI. How many dots are there in total?

    1. 400,000
    2. 2,000
    3. 200,000
    4. 1,000
    Show answer

    Answer: A. Across = 5 x 200 = 1,000; down = 2 x 200 = 400. Total = 1,000 x 400 = 400,000.

  3. 3. A processor runs at 40 MIPS. How long does it take for 200 million instructions?

    1. 8 seconds
    2. 0.2 seconds
    3. 5 seconds
    4. 50 seconds
    Show answer

    Answer: C. 40 MIPS means 40 million instructions per second. 200 / 40 = 5 seconds.

  4. 4. Which file format stores instructions for notes rather than recorded sound?

    1. WAV
    2. AVI
    3. BMP
    4. MIDI
    Show answer

    Answer: D. MIDI (Musical Instrument Digital Interface) holds music instructions. WAV stores audio itself.

  5. 5. Which format describes images by shapes, so they stay sharp when enlarged?

    1. SVG
    2. BMP
    3. TIFF
    4. MIPS
    Show answer

    Answer: A. SVG is Scalable Vector Graphics. BMP and TIFF are bitmap-style image formats, and MIPS is not a file format.

Privacy · Terms · Refunds · Delivery