- Foundation
- 15 practice questions
Final self-assessment: Hardware and peripherals
Test yourself on the whole course: 15 questions with answers explained.
If something looks wrong, please tell us.
Attempt all 15 questions, then check your answers. Questions 1-3: lesson 1 (motherboard and ports); 4-6: lesson 2 (storage devices); 7-9: lesson 3 (monitors and displays); 10-12: lesson 4 (printers); 13-15: lesson 5 (OMR, OCR, MICR and barcodes). Revisit a lesson for the questions you missed.
Final self-assessment
-
1. Which of these is NOT attached to the motherboard?
- The CPU socket
- RAM slots
- The monitor screen
- The chipset
Show answer
Answer: C. The CPU socket, RAM slots and chipset sit on the motherboard; the monitor is an external output device connected through a port.
-
2. Which motherboard part holds the start-up instructions?
- The chipset
- The BIOS/firmware chip
- An expansion slot
- The RAM slot
Show answer
Answer: B. The BIOS/firmware chip holds the instructions used when the computer starts.
-
3. Which pairing of port and use is correct?
- HDMI: wired network connection
- Ethernet: headphones
- Audio jack: sending video to a TV
- VGA: older analog video to a monitor
Show answer
Answer: D. VGA is the older analog video connection; HDMI carries video and sound, Ethernet is for wired networks, the audio jack for headphones and microphone.
-
4. Which storage device is magnetic and has moving parts?
- Solid-state drive
- Pen drive
- Memory card
- Hard disk drive
Show answer
Answer: D. A hard disk uses magnetic spinning platters and a moving head; the other three are flash with no moving parts.
-
5. A company wants cheap long-term backup of very large data. Which is the most suitable?
- A CD-ROM
- Magnetic tape
- A memory card
- RAM
Show answer
Answer: B. Magnetic tape gives large capacity at low cost per byte for backups; a CD-ROM cannot be written, and RAM loses its data when power goes.
-
6. Which disc can be erased and written again many times?
- DVD-ROM
- DVD-R
- DVD-RW
- CD-ROM
Show answer
Answer: C. RW means rewritable; R is recordable once and ROM is read only.
-
7. Screen P is 1280 x 720 and screen Q is 1024 x 768, the same size. Which has more pixels and by how many?
- P, by 135,168 pixels
- Q, by 135,168 pixels
- P, by 256 pixels
- They have the same number of pixels
Show answer
Answer: A. 1280 x 720 = 921,600 and 1024 x 768 = 786,432; the difference is 135,168, so P has more.
-
8. An LED monitor is best described as
- A cathode ray tube with LED lamps
- An LCD that uses light-emitting diodes as its backlight
- A screen with no liquid crystals or light
- A printer that uses LEDs
Show answer
Answer: B. An LED display is an LCD panel lit by an LED backlight, which makes it thinner and more efficient.
-
9. A monitor measures 38.1 cm diagonally. What is its size in inches?
- 14 inches
- 16 inches
- 17 inches
- 15 inches
Show answer
Answer: D. 38.1 / 2.54 = 15 inches.
-
10. Which is the correct pair of non-impact printers?
- Inkjet and thermal
- Dot matrix and laser
- Daisy wheel and inkjet
- Line printer and thermal
Show answer
Answer: A. Inkjet, laser and thermal are non-impact; dot matrix, daisy wheel and line printers are impact.
-
11. A printer is rated at 25 PPM. How long does it take to print 375 pages?
- 12 minutes
- 18 minutes
- 15 minutes
- 20 minutes
Show answer
Answer: C. 375 / 25 = 15 minutes.
-
12. Which printer uses heat on special paper, as for many shop receipts?
- Inkjet printer
- Laser printer
- Thermal printer
- Dot matrix printer
Show answer
Answer: C. A thermal printer forms the image by heating special paper.
-
13. Why do banks print cheque numbers in magnetic ink?
- It is hard to alter and can be read quickly by MICR machines
- It can be read by OMR answer-sheet machines
- It turns the cheque into editable text
- It lets barcode readers price the cheque
Show answer
Answer: A. MICR reads magnetic-ink characters; such characters are hard to alter and easy for machines to read.
-
14. Which device would a shop use to read the pattern of black and white bars on a product?
- OMR
- MICR
- Light pen
- Barcode reader
Show answer
Answer: D. A barcode reader reads the pattern of bars used for pricing and stock.
-
15. Which device is matched with what it reads?
- OMR: magnetic-ink characters
- OCR: printed or typed characters
- MICR: shaded bubbles
- Barcode reader: handwriting in boxes
Show answer
Answer: B. OCR reads printed characters; OMR reads marks in bubbles, MICR reads magnetic ink and a barcode reader reads bars.
Sign in to keep track of the lessons you finish.