• Foundation
  • About 12 min
  • 5 practice questions

Clean energy and efficiency: tools for mitigation

Learn the main renewable and low-carbon energy sources, see why saving energy matters as much as supplying clean energy, and work through a simple energy-saving calculation.

If something looks wrong, please tell us.

Burning coal, oil and gas for electricity, transport and heating is the biggest source of carbon dioxide. To cut emissions, we can do two things: use energy more wisely and get it from sources that release little carbon dioxide. This lesson introduces both.

Fossil fuels and why they matter

Coal, oil and natural gas formed from ancient living things. Burning them releases carbon that had been locked underground for millions of years, so it adds to the carbon in the air. They are non-renewable: once used, they cannot be replaced in a human lifetime.

Renewable energy

Renewable sources are replaced naturally as we use them.

Main renewable sources
SourceHow it worksPoints to remember
SolarPanels turn sunlight into electricity, or collectors heat waterWorks in daytime; storage needed for night
WindTurbines turn the force of moving air into electricityNeeds steady wind; varies from day to day
HydroFalling water turns turbinesNeeds rivers and dams; dams can displace people and harm river life
BiomassBurning or converting plant matterCan be low-carbon if plants are regrown
GeothermalUses heat from inside the EarthOnly in suitable places

Nuclear power is low in carbon dioxide emissions during operation, but it is not renewable because it uses uranium, and it brings the problem of safely storing radioactive waste.

Energy efficiency

The cleanest energy is the energy we do not use. Energy efficiency means getting the same result with less energy: LED lamps instead of old bulbs, efficient fans and refrigerators, better insulation, and public transport instead of many separate vehicles. Efficiency saves money as well as emissions.

Worked examples

Example 1 (an LED lamp). An old bulb uses 60 W and an LED lamp gives similar light using 9 W. Both are on for 5 hours a day. Power saved = 60 − 9 = 51 W. Energy saved per day = 51 W × 5 h = 255 watt-hours = 0.255 kWh. Over a year, 0.255 × 365 = 93.1 kWh.

Example 2 (emissions saved). Suppose, for practice, that each unit (kWh) of electricity from the grid leads to 0.8 kg of carbon dioxide. Saving 93.1 kWh avoids 93.1 × 0.8 = 74.5 kg of carbon dioxide per lamp each year. This is an illustrative figure and not the true value for any particular grid. If a household has 6 such lamps, the saving is 6 × 74.5 = 447 kg.

Example 3 (sorting). Sort these into renewable and non-renewable: coal, wind, natural gas, solar, hydro, oil. Renewable: wind, solar, hydro. Non-renewable: coal, natural gas, oil.

Example 4 (limits). Why can solar power alone not run a city all day? The Sun does not shine at night, and output falls in cloudy weather. Solar power needs to be combined with storage, other sources or a grid that can share power over wide areas.

Cut emissions by using less energy (efficiency) and by using clean sources (renewables). Fossil fuels are non-renewable and add carbon to the air.

Key takeaways

Mitigation of climate change means cutting emissions. Efficiency reduces demand, and renewable sources supply energy with little carbon dioxide. Each source has strengths and limits, so a mix is usually needed.

Check your understanding

  1. 1. Which of these is a non-renewable energy source?

    1. Wind
    2. Solar
    3. Coal
    4. Hydro
    Show answer

    Answer: C. Coal is a fossil fuel and cannot be replaced in a human lifetime.

  2. 2. What is the energy saved by replacing a 60 W bulb with a 9 W LED used 5 hours a day, per day?

    1. 0.255 kWh
    2. 0.045 kWh
    3. 0.300 kWh
    4. 2.55 kWh
    Show answer

    Answer: A. (60 − 9) W × 5 h = 255 Wh = 0.255 kWh.

  3. 3. Energy efficiency means

    1. Burning more fuel
    2. Using more energy for the same result
    3. Getting the same result with less energy
    4. Using only solar power
    Show answer

    Answer: C. Efficiency means doing the same job with less energy, which reduces both cost and emissions.

  4. 4. Which statement about hydro power is correct?

    1. It needs no water to work at all
    2. It uses falling water to turn turbines
    3. It works only during the night time
    4. It has no effect on rivers or fish
    Show answer

    Answer: B. Hydro power uses flowing or falling water. Dams can affect rivers and the people living near them.

  5. 5. Why is storage important for solar and wind power?

    1. They never produce any electricity at all
    2. They make far too much carbon dioxide
    3. They can run without any grid at all
    4. Output stops when it is dark or still
    Show answer

    Answer: D. Solar and wind output varies with weather and time of day, so storage or other sources are needed when output is low.

Privacy · Terms · Refunds · Delivery