- Advanced
- About 16 min
- 5 practice questions
Air pollutants, smog chemistry and unit conversions
Separate primary from secondary pollutants, explain both kinds of smog and temperature inversion, and convert gas concentrations between ppm and micrograms per cubic metre.
If something looks wrong, please tell us.
Advanced questions on air pollution rarely ask you to name a pollutant. They ask which pollutant is formed in the air rather than emitted, why a smog episode happens on a still winter morning or a sunny summer afternoon, and how a reading in parts per million compares with one in micrograms per cubic metre. This lesson builds the chemistry and the arithmetic you need for all three, and the later lessons on acid rain, water and control devices build on it.
Primary and secondary pollutants
A primary pollutant is emitted directly from a source in harmful form: sulphur dioxide from burning coal, carbon monoxide from incomplete combustion, nitric oxide from hot engines, soot and fly ash from chimneys. A secondary pollutant is not emitted at all; it forms in the atmosphere when primary pollutants react, often with the help of sunlight or moisture. Ground-level ozone, peroxyacetyl nitrate (PAN), sulphuric acid droplets and nitric acid are the standard secondary pollutants. The trap in exam options is ozone: because it is not released from any chimney or exhaust pipe, it is secondary, even though it is a major pollutant near the ground.
Two kinds of smog
Classical (London-type) smog is a mixture of smoke, soot and sulphur dioxide with fog. It forms in cool, damp weather, is chemically reducing in nature, and irritates the lungs. Photochemical (Los Angeles-type) smog needs three ingredients together: sunlight, nitrogen oxides and volatile organic compounds (unburnt hydrocarbons). It forms on warm, sunny days in traffic-heavy cities and is oxidising in nature, because ozone and PAN are strong oxidants. Its brownish haze comes from nitrogen dioxide, and it causes eye irritation and damage to plant leaves.
The core reaction chain is short. Sunlight splits nitrogen dioxide: NO₂ → NO + O. The free oxygen atom joins an oxygen molecule: O + O₂ → O₃. Normally NO would destroy this ozone again (NO + O₃ → NO₂ + O₂), but hydrocarbon fragments convert NO back to NO₂ without using up ozone, so ozone accumulates through the afternoon. The same hydrocarbon fragments combine with nitrogen dioxide to form PAN and aldehydes such as formaldehyde.
| Feature | Classical smog | Photochemical smog |
|---|---|---|
| Weather | Cool, humid, foggy | Warm, sunny, dry |
| Main ingredients | Smoke, SO₂, fog | NOx, hydrocarbons, sunlight |
| Chemical nature | Reducing | Oxidising |
| Key products | Sulphuric acid droplets, soot | Ozone, PAN, aldehydes |
Temperature inversion
Normally air gets cooler with height, so warm polluted air near the ground rises and disperses. In a temperature inversion, a layer of warmer air sits above cooler air near the ground. The cool, dense air cannot rise through the warm lid, so pollutants are trapped close to the surface. Inversions are common on calm, clear winter nights when the ground loses heat quickly, and in valleys surrounded by hills, which is why smog episodes are worst on still mornings.
Converting ppm to micrograms per cubic metre
Gas concentrations are given either as a volume ratio (ppm) or as mass per volume (µg/m³). At 25 °C and 1 atmosphere one mole of any gas occupies about 24.45 litres, which gives the conversion: concentration in µg/m³ = ppm × molar mass × 1000 ÷ 24.45. A heavier gas therefore gives a larger mass figure for the same ppm.
Worked example 1: sulphur dioxide
A reading shows 0.05 ppm of SO₂. The molar mass of SO₂ is 32 + 2 × 16 = 64 g/mol. Concentration = 0.05 × 64 × 1000 ÷ 24.45 = 3200 ÷ 24.45 ≈ 130.9 µg/m³. So 0.05 ppm of sulphur dioxide is about 131 µg/m³.
Worked example 2: carbon monoxide
A busy junction records 9 ppm of CO (molar mass 12 + 16 = 28 g/mol). Concentration = 9 × 28 × 1000 ÷ 24.45 = 252000 ÷ 24.45 ≈ 10306.7 µg/m³, which is about 10.3 mg/m³. Carbon monoxide is usually reported in mg/m³ precisely because the microgram figure is so large.
Worked example 3: classify the pollutants
From the list SO₂, O₃, CO, PAN, soot and HNO₃, pick the secondary pollutants. SO₂, CO and soot come straight out of sources, so they are primary. Ozone and PAN form from NOx and hydrocarbons in sunlight, and nitric acid forms when NO₂ reacts with water vapour, so O₃, PAN and HNO₃ are secondary: three in all.
Secondary = formed in the air, not emitted. Photochemical smog = sunlight + NOx + hydrocarbons, oxidising. µg/m³ = ppm × molar mass × 1000 ÷ 24.45 (at 25 °C, 1 atm).
Key takeaways: classify a pollutant by where it is formed, not by how harmful it is; match each smog to its weather and its chemistry; remember that an inversion is a warm lid over cool air; and use the 24.45 conversion with the molar mass worked out from atomic masses.
Check your understanding
-
1. Which of these is a secondary air pollutant?
- Ground-level ozone
- Sulphur dioxide
- Carbon monoxide
- Fly ash
Show answer
Answer: A. Ozone near the ground is not emitted by any source; it forms when sunlight splits NO₂ and the oxygen atom joins O₂. The other three are released directly, so they are primary.
-
2. What is 0.1 ppm of NO₂ (molar mass 46 g/mol) in µg/m³ at 25 °C and 1 atm?
- About 46 µg/m³
- About 188 µg/m³
- About 4600 µg/m³
- About 112 µg/m³
Show answer
Answer: B. 0.1 × 46 × 1000 ÷ 24.45 = 4600 ÷ 24.45 ≈ 188.1 µg/m³.
-
3. Which set of conditions produces photochemical smog?
- Fog, smoke and sulphur dioxide on a cold night
- Rain, carbon dioxide and dust
- Sunlight, nitrogen oxides and hydrocarbons
- Snow, methane and ammonia
Show answer
Answer: C. Photochemical smog needs sunlight to split NO₂, plus hydrocarbons that keep NO from destroying the ozone formed.
-
4. During a temperature inversion, which statement is correct?
- Air near the ground is warmer than the air above, so pollutants rise quickly
- Temperature falls faster than usual with height
- Strong winds mix the lower atmosphere
- A warm air layer lies above cooler air near the ground, trapping pollutants
Show answer
Answer: D. In an inversion the usual cooling with height is reversed. Cool, dense surface air cannot rise through the warm layer above, so pollutants stay near the ground.
-
5. Classical (London-type) smog is best described as:
- Oxidising in nature, rich in ozone and PAN
- Reducing in nature, formed from smoke and SO₂ in cool, foggy weather
- Formed only on hot, sunny afternoons
- Made mainly of methane and water vapour
Show answer
Answer: B. London smog is smoke + SO₂ + fog in cool, damp air, and it is reducing. Ozone and PAN belong to photochemical smog, which is oxidising.
Sign in to keep track of the lessons you finish.