- Practice
- About 16 min
- 5 practice questions
Measuring sustainability: footprint, biocapacity and IPAT
Compare an ecological footprint with biocapacity, use the IPAT relation to see what drives impact, and solve short illustrative calculations on overshoot and change.
If something looks wrong, please tell us.
Sustainable development is easy to praise and hard to measure. Practice questions therefore lean on a few simple measuring ideas: carrying capacity, the ecological footprint compared with biocapacity, and the IPAT relation. Each can be turned into a two-line calculation. All the numbers in this lesson are illustrative; the methods are what you need to learn.
Carrying capacity
The carrying capacity of an area is the largest population it can support indefinitely without degrading the resources it depends on. It is not a fixed number. Better technology can raise it, for example drip irrigation stretching the same water over more fields, and damage such as soil erosion can lower it. A population above carrying capacity is in overshoot: it can continue for a while only by drawing down stocks, the way a family can live beyond its income for a while by spending its savings.
Ecological footprint and biocapacity
The ecological footprint measures how much biologically productive land and water a population needs to produce what it consumes and to absorb its wastes, especially carbon dioxide. Biocapacity measures how much productive land and water is actually available. Both are expressed in the same unit, global hectares, so they can be compared directly. If footprint is larger than biocapacity, there is an ecological deficit, and the population is living on stocks or on other regions' capacity. If biocapacity is larger, there is a reserve.
Worked example 1: deficit and overshoot
Suppose a region's footprint is 3.6 global hectares per person and its biocapacity is 2.4 global hectares per person. Deficit per person = 3.6 − 2.4 = 1.2 global hectares. The ratio footprint ÷ biocapacity = 3.6 ÷ 2.4 = 1.5, which is often read as 'living as if we had one and a half regions'. If the region has 2 million people, the total deficit is 1.2 × 2 million = 2.4 million global hectares. To close the gap by cutting the footprint alone, the footprint must fall by 1.2 out of 3.6, that is by one third, or about 33 per cent.
The IPAT relation
The IPAT relation writes environmental Impact as the product of Population, Affluence (consumption per person) and Technology (impact per unit of consumption): I = P × A × T. It is a way of organising thought rather than an exact law, but it explains why the same technology can lead to rising damage when population or consumption grows, and why better technology is needed just to stand still. Because the terms multiply, percentage changes combine by multiplying factors, not by adding percentages.
Worked example 2: combining changes
Over a period, population rises by 10 per cent and consumption per person by 20 per cent, while impact per unit of consumption falls by 25 per cent. New impact as a multiple of old = 1.10 × 1.20 × 0.75. First 1.10 × 1.20 = 1.32; then 1.32 × 0.75 = 0.99. Impact falls by 1 per cent. The trap is to add the percentages: +10 + 20 − 25 = +5, which wrongly suggests a rise. Always multiply the factors.
I = P × A × T. Change factors multiply: new I ÷ old I = (P factor) × (A factor) × (T factor). Footprint greater than biocapacity means an ecological deficit.
Common traps
- Adding percentage changes in IPAT instead of multiplying factors.
- Reading a footprint as land actually occupied: it is the productive area needed, much of it to absorb carbon.
- Treating carrying capacity as fixed: technology and degradation both move it.
- Comparing a footprint in one unit with a biocapacity in another: both must be in global hectares.
Key takeaways: carrying capacity is the population an area can support indefinitely; the footprint is demand and biocapacity is supply, compared in global hectares; footprint above biocapacity is a deficit; in I = P × A × T, change factors multiply; a fall in technology impact can be cancelled by growth in population and consumption.
Check your understanding
-
1. A region's footprint is 4.0 global hectares per person and its biocapacity 2.5 global hectares per person. What is the deficit per person?
- 1.5 global hectares
- 6.5 global hectares
- 1.6 global hectares
- 2.5 global hectares
Show answer
Answer: A. Deficit = footprint − biocapacity = 4.0 − 2.5 = 1.5 global hectares per person.
-
2. In the IPAT relation, the letter A stands for:
- Area of land
- Affluence, or consumption per person
- Air pollution
- Agricultural output
Show answer
Answer: B. I = P × A × T: Impact = Population × Affluence (consumption per person) × Technology (impact per unit of consumption).
-
3. Population rises 20 per cent and consumption per person rises 25 per cent, with technology unchanged. By what percentage does impact change?
- Rises by 50 per cent
- Rises by 45 per cent
- Rises by 5 per cent
- Unchanged
Show answer
Answer: A. Factor = 1.20 × 1.25 × 1 = 1.50, a 50 per cent rise. Adding the percentages (45) is the trap.
-
4. Which statement about carrying capacity is correct?
- It is a fixed number for every region
- It is the population living in an area today
- It can be raised by better technology and lowered by degradation
- It applies only to animals, not to people
Show answer
Answer: C. Carrying capacity is the population supportable indefinitely; technology can raise it and erosion or pollution can lower it.
-
5. A footprint of 3.0 must be brought down to a biocapacity of 2.4 (both global hectares per person). By what percentage must the footprint fall?
- 25 per cent
- 60 per cent
- 24 per cent
- 20 per cent
Show answer
Answer: D. Required fall = 0.6 out of 3.0 = 0.2 = 20 per cent. Dividing 0.6 by 2.4 gives 25 per cent, which uses the wrong base.
Sign in to keep track of the lessons you finish.