• Advanced
  • About 18 min
  • 5 practice questions

Integrated solid waste management: multi-stage mass balances

Trace waste through collection, segregation, processing and disposal with chained efficiencies, and compute landfill load and diversion for a whole city.

If something looks wrong, please tell us.

Advanced questions treat a city's waste as a system. Waste is generated, some is collected, part is segregated, streams go to different plants, each plant rejects a share, and the rejects join whatever goes to the landfill. The skill being tested is the mass balance: every tonne must be accounted for. This lesson sets out the system and a fast, reliable way to track it.

The functional elements

Integrated solid waste management (ISWM) combines several methods, chosen to suit the waste's composition, instead of relying on one. Its functional elements, in order, are: generation (including source reduction); on-site handling, storage and segregation; collection; transfer and transport, where small collection vehicles unload at a transfer station into large vehicles for the long haul; processing, which includes material recovery facilities (MRFs) that sort dry recyclables, composting and anaerobic digestion plants for organics, and waste-to-energy plants; and finally disposal in an engineered landfill. The order of preference still follows the waste hierarchy: the system is designed so that as little as possible reaches the last element.

The mass balance method

For each stream, multiply the efficiencies in the chain: tonnes in a stream = generated x collection efficiency x share of that component x segregation (capture) efficiency. At each plant: input = product + rejects (+ losses such as water and gas, if a question includes them). Rejects from MRFs and compost plants usually go to the landfill. Whatever is collected but not captured into a separate stream stays in the mixed residual stream, which is also landfilled unless it goes to waste-to-energy. Finally, check that products plus landfill add back to the collected total. Uncollected waste is a separate, unmanaged quantity; it must never be counted as diverted.

Two ratios matter. Diversion = (products recycled, composted or recovered) / waste collected, unless a question asks for waste generated. Capture efficiency is the share of a component that reaches its correct stream. Capture at source is usually the most powerful lever, because a tonne of organics left in the mixed stream goes straight to the landfill no matter how good the compost plant is.

Worked example 1: a city balance

Illustrative figures: a city generates 1,000 tonnes a day and collects 90%, so 900 t are collected. Organics are 50% of collected waste (450 t) and households capture 80% of them into the wet stream: 360 t. The compost plant rejects 10% of its input: 36 t rejects, 324 t composted. Dry recyclables are 20% of collected waste (180 t, assume all captured into the dry stream); the MRF recovers 75%: 135 t recycled, 45 t rejects. Mixed residual = 900 - 360 - 180 = 360 t. Landfill = 360 + 36 + 45 = 441 t. Check: 324 + 135 + 441 = 900. Diversion = (324 + 135) / 900 = 459 / 900 = 51%.

Worked example 2: improving capture

Raise organic capture from 80% to 95%, all else equal. Wet stream = 0.95 x 450 = 427.5 t; rejects 42.75 t; composted 384.75 t. Mixed residual = 900 - 427.5 - 180 = 292.5 t. Landfill = 292.5 + 42.75 + 45 = 380.25 t. Diversion = (384.75 + 135) / 900 = 519.75 / 900 = 57.75%. A 15-point rise in household capture cut the landfill load by about 61 t a day - more than the whole MRF reject stream. Speed tip: the change in landfill load = change in captured tonnes x (1 - reject rate) = 67.5 x 0.9 = 60.75 t.

Stream = generated x collection x share x capture. Plant input = product + rejects. Landfill = mixed residual + all rejects. Products + landfill must equal tonnes collected.

Key takeaways

  • Elements: generation, storage and segregation, collection, transfer and transport, processing, disposal.
  • Multiply efficiencies along a chain; subtract captured streams to get the mixed residual.
  • Rejects from every plant add to the landfill.
  • Capture at source is usually the strongest lever on diversion.

Key takeaways: draw the boxes, label every arrow with tonnes, and close the balance before you trust a rate.

Check your understanding

  1. 1. Illustrative figures: a town generates 500 t a day, collects 80%, organics are 60% of collected waste, and households capture 75% of organics into the wet stream. How many tonnes enter the wet stream?

    1. 240 t
    2. 300 t
    3. 180 t
    4. 225 t
    Show answer

    Answer: C. 500 x 0.80 = 400 t collected; organics = 0.60 x 400 = 240 t; captured = 0.75 x 240 = 180 t. 240 t forgets capture efficiency.

  2. 2. At which facility do small collection vehicles unload so that waste can be moved in large vehicles over long distances?

    1. Transfer station
    2. Material recovery facility
    3. Sanitary landfill
    4. Compost plant
    Show answer

    Answer: A. Transfer and transport is the functional element where waste is consolidated into larger vehicles at a transfer station.

  3. 3. What is the main job of a material recovery facility (MRF)?

    1. Composting kitchen waste
    2. Sorting dry recyclables into separate saleable materials
    3. Burning waste to produce steam
    4. Treating landfill leachate
    Show answer

    Answer: B. An MRF receives dry waste and separates paper, plastics, metals and glass for recycling; its rejects usually go to landfill.

  4. 4. Illustrative figures: 600 t is collected. The wet stream is 240 t and the compost plant rejects 15%; the dry stream is 120 t and the MRF recovers 70%; everything else is mixed residual sent to landfill. What is the total landfill load?

    1. 240 t
    2. 312 t
    3. 276 t
    4. 288 t
    Show answer

    Answer: B. Mixed residual = 600 - 240 - 120 = 240 t. Compost rejects = 0.15 x 240 = 36 t. MRF rejects = 0.30 x 120 = 36 t. Landfill = 240 + 36 + 36 = 312 t. Check: composted 204 + recycled 84 + 312 = 600.

  5. 5. In a city's mass balance, how should waste that is generated but never collected be treated?

    1. As diverted from landfill
    2. As recycled material
    3. As unmanaged waste, separate from both diversion and landfill
    4. As part of the compost plant's product
    Show answer

    Answer: C. Uncollected waste is likely dumped or burnt; counting it as diverted would make the system look better than it is.

Privacy · Terms · Refunds · Delivery