• Foundation
  • About 14 min
  • 5 practice questions

Contour patterns: spurs, saddles, depressions and heights

Read spot heights and benchmarks, find contour interval and relative height, and recognise spurs, saddles, ridges, depressions and slope shapes.

If something looks wrong, please tell us.

You know that contours join equal heights and that close lines mean a steep slope. A topographic map offers more clues than that. This lesson shows how to read heights, how to work out a contour interval, and how to tell several landforms apart by the pattern of the lines.

Heights marked on the map

  • Contour interval: the height difference between two neighbouring contours. It is the same all over one map.
  • Index contour: a thicker contour, labelled with its height, repeated at every fifth line to help you count.
  • Spot height: the height of a single point, written as a number with a dot.
  • Benchmark (BM): a surveyed point of known height, shown as BM with its height.

Landforms and their contour patterns

Patterns
LandformHow the contours look
Hill or peakClosed rings; heights increase inward
DepressionClosed rings; heights decrease inward, often with small ticks on the inside
ValleyV or U shapes pointing towards higher ground
SpurV or U shapes pointing towards lower ground
Saddle (col)Two sets of higher contours facing each other across a lower gap
CliffContours run together or merge

Slope shape can be read too. If lines are widely spaced at the top and close together at the bottom, the slope is gentle at the top and steep at the foot, a convex slope. If lines are close at the top and wide apart at the foot, the slope is steep at the top and gentle at the foot, a concave slope.

Worked example 1: contour interval and height

Question: The contour lines on a map are 25 m apart. Starting at the 300 m line, what is the height of the fourth line above it? Working: each line adds 25 m. The lines are 325, 350, 375 and 400 m. Answer: 400 m, since 300 + 4 x 25 = 400.

Worked example 2: relative height

Question: A hill has a spot height of 780 m and the stream in the valley beside it flows at 540 m. What is the relative height of the hill above the stream? Working: relative height = higher level - lower level = 780 - 540. Answer: 240 m.

Worked example 3: a hill's height range

Question: The highest closed contour on a hill is 600 m and the interval is 20 m. There is no spot height. Between which two heights does the hilltop lie? Working: the next contour would be 620 m, and it does not appear as a ring, so the top is above 600 m but below 620 m. Answer: between 600 m and 620 m.

When a question gives you a pattern and asks for the landform, first decide whether heights rise or fall inward or towards a V, and only then name the feature. A quick sketch of three or four contour lines with their heights written beside them removes most confusion.

Interval is the gap between neighbouring lines; relative height is the difference of two heights; V pointing uphill is a valley, V pointing downhill is a spur.

— Rule to remember

Key takeaways: read the interval before anything else; use inward-increasing rings for hills and inward-decreasing rings for depressions; distinguish valleys from spurs by the way the V points.

Check your understanding

  1. 1. Contours at 100 m, 150 m and 200 m are drawn. The contour interval is:

    1. 25 m
    2. 50 m
    3. 100 m
    4. 150 m
    Show answer

    Answer: B. 150 - 100 = 50 m.

  2. 2. Closed contour rings with heights decreasing towards the centre show:

    1. A hill or peak
    2. A long spur
    3. A depression
    4. A saddle gap
    Show answer

    Answer: C. Heights that fall inward mark a hollow, or depression.

  3. 3. V-shaped contours pointing towards lower ground show a:

    1. Valley
    2. Plateau
    3. Gorge
    4. Spur
    Show answer

    Answer: D. A V pointing downhill marks a spur, a ridge jutting down the slope. A valley has its V pointing uphill.

  4. 4. A peak has a height of 1,250 m and a nearby lake has a surface at 950 m. The relative height of the peak above the lake is:

    1. 300 m
    2. 200 m
    3. 2,200 m
    4. 400 m
    Show answer

    Answer: A. 1,250 - 950 = 300 m.

  5. 5. A slope where contours are close at the top and wide apart at the foot is:

    1. Uniform
    2. Concave
    3. Convex
    4. Terraced
    Show answer

    Answer: B. Steep at the top and gentle at the foot is a concave slope.

Privacy · Terms · Refunds · Delivery