- Practice
- About 14 min
- 5 practice questions
Scale and area questions: practice
Practise converting scales, finding the ground area of a field on a map, and seeing what happens to the RF when a map is enlarged or reduced.
If something looks wrong, please tell us.
Distance questions are the easy part of scale. The questions that cost marks are those about area, enlargement and comparison of scales. Each has a quick method. This lesson sets out the question types, the methods and the usual traps.
Type 1: convert and compare
To compare maps, look at the fraction itself. A bigger fraction means a larger scale. Since 1/25,000 is bigger than 1/2,50,000, the map of RF 1 : 25,000 is the larger-scale map: it shows a smaller area in more detail.
Type 2: ground area of a field
Measure the two sides on the map, change each to ground distance, and then multiply. Or use the area factor: if 1 cm stands for k km, then 1 square centimetre on the map stands for k x k square kilometres.
Worked example 1: a rectangular field
Question: On a map of RF 1 : 50,000 a field measures 3 cm by 2 cm. Find the ground area. Working: 1 cm = 50,000 cm = 0.5 km. So 3 cm = 1.5 km and 2 cm = 1 km. Area = 1.5 x 1 = 1.5 square kilometres. Check with the area factor: 1 cm squared = 0.5 x 0.5 = 0.25 sq km, and the map area is 6 cm squared, so 6 x 0.25 = 1.5. Answer: 1.5 square km.
Worked example 2: from ground to map
Question: A lake covers 6 square km. How much map area does it take on a map of RF 1 : 50,000? Working: 1 square cm stands for 0.25 sq km, so the lake takes 6 / 0.25 = 24 square cm. Answer: 24 square cm.
Type 3: enlarging and reducing a map
If a map is photocopied so that every length becomes 2 times longer, the distances on the map double, so the RF denominator is halved. A map of RF 1 : 1,00,000 enlarged to twice the length becomes 1 : 50,000. If it is reduced to half the length, the denominator doubles to 1 : 2,00,000. Area changes by the square: doubling the length makes the area on the paper 4 times larger.
Worked example 3: after a reduction
Question: A map of RF 1 : 25,000 is reduced so that every length becomes one-third. What is the new RF? Working: lengths become one-third, so the same ground distance is shown by one-third as many centimetres. The denominator becomes 25,000 x 3 = 75,000. Answer: 1 : 75,000.
Common traps
- Squaring the RF denominator itself. Square the conversion in kilometres per centimetre, not the raw RF number.
- Thinking that a larger denominator means a larger scale. It means a smaller scale.
- Forgetting that an enlarged map changes the RF but a bar scale enlarges with the map.
- Mixing units. Keep cm and km apart until the end.
Area on the ground = map area x (km per cm) squared. Enlargement by n divides the RF denominator by n.
Key takeaways: compare scales as fractions; use the area factor; remember that enlargement shrinks the denominator.
Check your understanding
-
1. Which map has the largest scale?
- 1 : 50,000
- 1 : 5,00,000
- 1 : 25,000
- 1 : 10,00,000
Show answer
Answer: C. 1/25,000 is the biggest fraction, so it is the largest scale.
-
2. On a map of RF 1 : 1,00,000 a field is 4 cm by 3 cm. Its ground area is:
- 12 sq km
- 1.2 sq km
- 120 sq km
- 7 sq km
Show answer
Answer: A. 1 cm = 1 km, so the field is 4 km by 3 km = 12 sq km.
-
3. A map of RF 1 : 50,000 is enlarged so that lengths become 2 times longer. The new RF is:
- 1 : 1,00,000
- 1 : 25,000
- 1 : 50,000
- 1 : 5,00,000
Show answer
Answer: B. Doubling the lengths halves the denominator: 50,000 / 2 = 25,000.
-
4. A village covers 9 sq km. On a map where 1 cm stands for 1 km, its map area is:
- 3 sq cm
- 81 sq cm
- 1 sq cm
- 9 sq cm
Show answer
Answer: D. 1 sq cm stands for 1 sq km, so 9 sq km shows as 9 sq cm.
-
5. A map is reduced so that lengths become half. If its original RF was 1 : 40,000, the new RF is:
- 1 : 20,000
- 1 : 80,000
- 1 : 1,60,000
- 1 : 40,000
Show answer
Answer: B. Lengths become half, so the denominator doubles: 40,000 x 2 = 80,000.
Sign in to keep track of the lessons you finish.