- Practice
- About 15 min
- 5 practice questions
Earthquake measurement problems: magnitude, intensity, waves and zones
Practise telling magnitude from intensity, work out how much stronger one earthquake is than another, and use the gap between P and S waves to find a distance.
If something looks wrong, please tell us.
Questions on earthquakes in competitive exams fall into two groups: definition traps and small calculations. The traps usually mix up magnitude and intensity. The calculations use the rule that every step on the magnitude scale is a multiplication, not an addition. This lesson gives you a method for both. All numbers in the worked examples are illustrative, chosen to make the working easy to follow.
Magnitude and intensity are different things
An earthquake has one magnitude but many intensities. Magnitude describes the size of the earthquake at its source and is worked out from the records of a seismograph. The Richter scale is the famous example of a magnitude scale. Intensity describes what people actually see and feel at a particular place, such as rattling windows, cracked walls or collapsed houses. The Mercalli scale, written in Roman numerals from I to XII, is the standard intensity scale.
| Point | Magnitude | Intensity |
|---|---|---|
| What it measures | Energy released at the source | Effects at a place on people and buildings |
| How it is found | From seismograph records | From damage and reports of what was felt |
| Scale | Richter (and similar scales) | Mercalli, Roman numerals I to XII |
| How many values | One for each earthquake | Different at every place |
A useful way to remember this: magnitude is like the power of a bulb, while intensity is like how bright the light looks at different distances from it. A town close to the epicentre on soft ground may feel a high intensity, while a town far away feels very little, though both belong to the same earthquake.
The scale is a multiplication
The Richter and similar scales are logarithmic. For every rise of one whole number, the recorded ground motion (amplitude) becomes 10 times larger. The energy released rises by about 32 times (more exactly, 10 to the power 1.5). So a rise of two units multiplies the amplitude by 10 x 10 = 100 and the energy by roughly 32 x 32, which is about 1,000.
Worked example 1: comparing two earthquakes
Question: By how much do the ground motion and the energy of a magnitude 7 earthquake exceed those of a magnitude 5 earthquake? Working: the difference is 7 - 5 = 2 units. Amplitude: 10 x 10 = 100 times. Energy: 10 to the power (1.5 x 2) = 10 to the power 3 = 1,000 times. Answer: 100 times the ground motion and about 1,000 times the energy.
Seismic waves and the distance to an earthquake
P-waves are the fastest and arrive first, S-waves come next, and the slow surface waves arrive last and do the most damage. Because P and S waves leave the focus together but travel at different speeds, the gap between their arrival times grows with distance. The seismologist can turn that gap into a distance. S-waves cannot pass through liquid, so they are not recorded on the far side of the Earth beyond about 105 degrees from the epicentre, because the outer core is liquid.
Worked example 2: distance from the lag
Question: Suppose P-waves travel at 6 km per second and S-waves at 4 km per second. A station records the S-wave 30 seconds after the P-wave. How far is the focus? Working: let the distance be d km. Time for S = d / 4; time for P = d / 6. The lag is d / 4 - d / 6 = d / 12. Setting d / 12 = 30 gives d = 360 km. Check: 360 / 4 = 90 s and 360 / 6 = 60 s, and 90 - 60 = 30 s. Answer: 360 km (a value that suits these illustrative speeds only).
Seismic zones
India's seismic zoning map groups regions by the shaking expected in future, from a lower to the highest hazard zone. The Himalayan belt, the north-east and parts of Kutch lie in the highest zones, because they are close to active plate movement, while large parts of the old Peninsular block are in the lower zones. Such maps help decide how strong buildings in each region must be.
Magnitude: one number for each earthquake. Intensity: one number for each place. One magnitude step means amplitude x 10 and energy about x 32.
Key takeaways
- Richter (magnitude) measures size at the source; Mercalli (intensity) measures effects at a place.
- Each unit of magnitude multiplies amplitude by 10 and energy by about 32.
- P arrives first, then S, then surface waves; S cannot pass through liquid.
- The P-S time gap increases with the distance from the focus.
- Zoning maps rank regions by expected shaking and guide building rules.
Check your understanding
-
1. The Mercalli scale measures the:
- energy released by the focus
- depth of the earthquake focus
- effects felt at a particular place
- speed of the P-waves recorded
Show answer
Answer: C. Mercalli is an intensity scale based on observed effects at a place. Magnitude, not Mercalli, deals with energy at the source.
-
2. A magnitude 8 earthquake produces how many times the ground motion of a magnitude 6 earthquake?
- 2 times
- 100 times
- 10 times
- 1,000 times
Show answer
Answer: B. The difference is 2 units, so amplitude rises 10 x 10 = 100 times. The 1,000 figure applies to energy, not ground motion.
-
3. P-waves travel at 8 km/s and S-waves at 4 km/s. The S-wave arrives 20 s after the P-wave. The distance to the focus is:
- 80 km
- 240 km
- 120 km
- 160 km
Show answer
Answer: D. Let the distance be d. Lag = d/4 - d/8 = d/8. Setting d/8 = 20 gives d = 160 km. Check: 160/4 = 40 s and 160/8 = 20 s, a difference of 20 s.
-
4. Why are S-waves not recorded on the far side of the Earth?
- They cannot pass through the liquid outer core
- They are slower than the surface waves can be
- They die out completely in the solid crust
- They travel only along the surface of the Earth
Show answer
Answer: A. S-waves are shear waves and cannot move through liquid. The outer core is liquid, so they are blocked beyond about 105 degrees from the epicentre.
-
5. Which statement about one earthquake is correct?
- It has many magnitudes but one intensity
- It has one magnitude but many intensities
- It has the same intensity everywhere
- Its magnitude depends on the town
Show answer
Answer: B. Magnitude describes the source and has one value. Intensity depends on the place, so there are many values for the same earthquake.
Sign in to keep track of the lessons you finish.