- Practice
- About 14 min
- 5 practice questions
Density problems: finding population, area or density
Solve the four standard density questions, find a missing area or population, handle changes over time, and avoid the trap of averaging densities.
If something looks wrong, please tell us.
Density questions look different on the surface but all use one relationship. Once you can rearrange it, every variation becomes routine. In this lesson you will practise each question type, and see the traps that cost marks. All numbers are made up for practice and are not official figures.
The one formula and its three forms
| You need | Formula | Units |
|---|---|---|
| Density | Population divided by area | Persons per sq km |
| Population | Density multiplied by area | Persons |
| Area | Population divided by density | Sq km |
Write the formula first, then put the numbers in. Check units before you divide: if the area is in hectares, convert it (1 sq km = 100 hectares). If the population is in lakh, convert it (1 lakh = 100,000).
Question type 1: find the density
Divide population by area. If two places are compared, calculate each density and then compare. The place with the higher figure is more crowded, even if its total population is smaller.
Question type 2: find a missing quantity
When density and one other quantity are given, rearrange. To find population multiply; to find area divide. A common check: if the answer area is larger than the area of the whole state in the question, you have divided the wrong way.
Question type 3: combined regions
To find the density of two regions taken together, add the populations and add the areas, then divide. Never add the two densities and halve them unless the areas are equal. This is the most common trap in the topic.
Question type 4: change over time
Find the old density and the new density, then take the difference. For a percentage change divide the difference by the old density and multiply by 100. If the area has not changed, the percentage change in density equals the percentage change in population.
Worked example 1
Question: A district has a density of 350 persons per sq km and an area of 1,200 sq km. What is its population? Working: population = density times area = 350 times 1,200 = 420,000. Answer: 4,20,000 people.
Worked example 2
Question: District X has 3,00,000 people in 1,000 sq km. District Y has 5,00,000 people in 4,000 sq km. Find the density of X, of Y, and of the two taken together. Working: X is 300,000 / 1,000 = 300; Y is 500,000 / 4,000 = 125. Together the population is 800,000 and the area is 5,000, so the density is 800,000 / 5,000 = 160. Answer: 300, 125 and 160 persons per sq km. The trap answer (300 + 125) / 2 = 212.5 is wrong, because the two districts have very different areas.
Worked example 3
Question: A region of 2,500 sq km has 5,00,000 people and later has 6,25,000. By what percentage has the density changed? Working: old density 500,000 / 2,500 = 200; new density 625,000 / 2,500 = 250; difference 50; 50 / 200 x 100 = 25. Answer: it has risen by 25 per cent.
Worked example 4
Question: A block has an area of 40,000 hectares and a population of 80,000. Find its density per sq km. Working: 40,000 hectares = 400 sq km. Density = 80,000 / 400 = 200. Answer: 200 persons per sq km.
Always combine totals first, then divide. Convert hectares and lakh before you calculate.
Key takeaways
- Density, population and area: any one can be found from the other two.
- For combined regions add populations and areas, then divide.
- Percentage change is measured against the old value.
- Convert hectares to sq km and lakh to units first.
Check your understanding
-
1. A district of 900 sq km has a density of 240 persons per sq km. What is its population?
- 2,16,000
- 3,750
- 21,600
- 1,14,000
Show answer
Answer: A. Population = density x area = 240 x 900 = 2,16,000.
-
2. A population of 2,70,000 has a density of 90 persons per sq km. What is the area?
- 2,430 sq km
- 3,000 sq km
- 24,300 sq km
- 30,000 sq km
Show answer
Answer: B. Area = population / density = 270,000 / 90 = 3,000 sq km.
-
3. Two regions have 3,00,000 people in 1,000 sq km and 5,00,000 people in 4,000 sq km. What is their combined density?
- 125
- 212.5
- 300
- 160
Show answer
Answer: D. Total people 800,000 and total area 5,000 give 160. The mean of the densities (212.5) is the trap.
-
4. A block has 60,000 people in 20,000 hectares. What is its density per sq km?
- 3
- 30
- 300
- 3,000
Show answer
Answer: C. 20,000 hectares = 200 sq km. 60,000 / 200 = 300 persons per sq km.
-
5. The population of an unchanged area rises from 4,00,000 to 5,00,000. The percentage rise in density is:
- 25 per cent
- 20 per cent
- 30 per cent
- 125 per cent
Show answer
Answer: A. Density rises in the same proportion as population: 100,000 / 400,000 x 100 = 25 per cent.
Sign in to keep track of the lessons you finish.