- Practice
- About 13 min
- 5 practice questions
Distance, time and cost problems in transport
Practise the numerical question types set on transport: time, distance and speed, round-trip averages, and tonne-kilometre costs.
If something looks wrong, please tell us.
Numerical questions on transport look different, yet nearly all use the same three ideas: speed, tonne-kilometres and cost. This lesson gives you a method for each type and warns you of one famous trap. Every figure is made up for practice and is not an official rate or speed.
Method 1: distance, speed and time
Keep one triangle in mind. Distance = speed x time, so time = distance / speed and speed = distance / time. Before you calculate, make the units agree: kilometres with km/h and hours, or metres with m/s and seconds. For minutes, change to hours by dividing by 60.
Method 2: tonne-kilometres and cost
Tonne-kilometres = tonnes x kilometres. Cost = tonne-kilometres x rate for one tonne-kilometre. Multiply in two steps, and write the unit of each step so that you do not mix tonnes with kilometres.
Method 3: average speed on a round trip
The average speed of a whole journey is total distance / total time. It is not the plain average of the two speeds unless the times are equal. This is the common trap: a vehicle that goes at one speed and returns at another spends longer at the slower speed, so the true average is pulled towards the slower value.
Worked example 1: simple time
A truck must cover 360 km at an average speed of 45 km/h. Time = 360 / 45 = 8 hours. If it starts at 6 a.m. it arrives at 2 p.m., if it does not stop.
Worked example 2: round-trip trap
A van goes 120 km at 60 km/h and returns the same 120 km at 40 km/h. Going: 120 / 60 = 2 hours. Returning: 120 / 40 = 3 hours. Total distance = 240 km and total time = 5 hours. Average speed = 240 / 5 = 48 km/h. The plain average of 60 and 40 is 50, which is wrong. The answer is below 50 because more time was spent at 40 km/h.
Worked example 3: cost of freight
A company sends 80 tonnes of grain over 250 km at an assumed rate of Rs 0.75 per tonne-kilometre. Tonne-kilometres = 80 x 250 = 20,000. Cost = 20,000 x 0.75 = Rs 15,000.
Method 4: changing units of speed
To change km/h into m/s, multiply by 5/18 (because 1 km = 1,000 m and 1 hour = 3,600 s, and 1,000 / 3,600 = 5/18). To change m/s into km/h, multiply by 18/5.
Worked example 4: unit change
A train runs at 54 km/h. In m/s that is 54 x 5/18 = 15 m/s. In 40 seconds it covers 15 x 40 = 600 m. Had you multiplied 54 by 40 directly, you would have mixed hours with seconds and got a meaningless answer.
Speed methods
- Write the formula first, then the numbers.
- Convert minutes to hours before dividing: 30 minutes is 0.5 hour.
- Round-trip average: add the distances, add the times, then divide.
- Check that the answer is sensible: a goods train cannot average thousands of km/h.
Time = distance / speed. Tonne-km = tonnes x km. Round-trip average = total distance / total time, never the plain average.
Key takeaways
- Match units before you calculate.
- Cost problems are two multiplications.
- Beware of the plain-average trap for round trips.
Check your understanding
-
1. A bus covers 270 km at a steady 54 km/h. How long does it take?
- 4 hours
- 6 hours
- 5 hours
- 5.5 hours
Show answer
Answer: C. Time = 270 / 54 = 5 hours.
-
2. A lorry goes 200 km at 40 km/h and returns at 50 km/h. What is the average speed for the whole trip, to one decimal place?
- 45.0 km/h
- 44.4 km/h
- 40.0 km/h
- 50.0 km/h
Show answer
Answer: B. Going takes 200 / 40 = 5 hours and returning takes 200 / 50 = 4 hours. Average = 400 / 9 = 44.4 km/h, which is below the plain average of 45.
-
3. A rate of Rs 2 per tonne-kilometre is assumed. What is the cost of moving 60 tonnes for 150 km?
- Rs 18,000
- Rs 9,000
- Rs 1,800
- Rs 300
Show answer
Answer: A. Tonne-kilometres = 60 x 150 = 9,000. Cost = 9,000 x 2 = Rs 18,000.
-
4. A train covers 90 km in one and a half hours. What is its average speed?
- 45 km/h
- 135 km/h
- 80 km/h
- 60 km/h
Show answer
Answer: D. Speed = 90 / 1.5 = 60 km/h.
-
5. A truck moves at 48 km/h for 30 minutes. How far does it go?
- 24 km
- 48 km
- 12 km
- 96 km
Show answer
Answer: A. 30 minutes = 0.5 hour. Distance = 48 x 0.5 = 24 km.
Sign in to keep track of the lessons you finish.