• Foundation
  • About 16 min
  • 5 practice questions

Standard integrals: exponential and trigonometric functions

Integrate eˣ, aˣ and the six trigonometric derivatives from the standard table, handle a linear inside such as e^(3x − 1) or cos(5x + 2), and use identities such as tan²x = sec²x − 1.

If something looks wrong, please tell us.

Every derivative you learnt can be read backwards to give an integral. Collecting these gives a short table of standard integrals, and most integrals in this course end by reducing to one line of it. This lesson builds the table, adds one rule for a linear expression inside a function, and shows how identities turn awkward integrands into table entries.

The table of standard integrals

Standard integrals read from standard derivatives
IntegrandIntegral (add C)Because
eˣeˣd/dx(eˣ) = eˣ
aˣ (a > 0, a ≠ 1)aˣ/ln ad/dx(aˣ) = aˣ ln a
sin x−cos xd/dx(cos x) = −sin x
cos xsin xd/dx(sin x) = cos x
sec²xtan xd/dx(tan x) = sec²x
cosec²x−cot xd/dx(cot x) = −cosec²x
sec x tan xsec xd/dx(sec x) = sec x tan x
cosec x cot x−cosec xd/dx(cosec x) = −cosec x cot x
1/√(1 − x²)sin⁻¹ xd/dx(sin⁻¹ x) = 1/√(1 − x²)
1/(1 + x²)tan⁻¹ xd/dx(tan⁻¹ x) = 1/(1 + x²)

Watch the signs: sin x integrates to minus cos x, and the "co" functions (cosec², cosec cot) carry a minus sign too. Angles are always in radians.

Worked example 1: using the table term by term

∫ (3eˣ − 4 cos x + 2/x) dx = 3eˣ − 4 sin x + 2 ln|x| + C. Each term is a table entry multiplied by a constant.

A linear expression inside

If the inside of a standard function is ax + b instead of x, integrate as usual and divide by a, the coefficient of x. The reason: differentiating F(ax + b) brings out a factor a (chain rule), so integrating must divide by it.

If ∫ f(x) dx = F(x) + C, then ∫ f(ax + b) dx = (1/a) F(ax + b) + C, for any constant a ≠ 0.

Worked example 2: linear insides

∫ e^(3x − 1) dx = (1/3)e^(3x − 1) + C. ∫ cos(5x + 2) dx = (1/5) sin(5x + 2) + C. ∫ 1/(2x + 1) dx = (1/2) ln|2x + 1| + C. Check the first: d/dx[(1/3)e^(3x − 1)] = (1/3) · 3e^(3x − 1) = e^(3x − 1). This rule works only for a linear inside; e^(x²) cannot be handled this way.

Worked example 3: an exponential with another base

∫ 2ˣ dx = 2ˣ/ln 2 + C, since d/dx(2ˣ) = 2ˣ ln 2. Do not use the power rule here: x is in the exponent, not the base.

Using identities to reach the table

Some integrands are not in the table but become table entries after an identity. Useful ones: tan²x = sec²x − 1, cot²x = cosec²x − 1, and splitting a fraction over a single denominator.

Worked example 4: tan²x

∫ tan²x dx = ∫ (sec²x − 1) dx = tan x − x + C. Check: d/dx(tan x − x) = sec²x − 1 = tan²x.

Worked example 5: split the fraction

∫ (1 − sin x)/cos²x dx. Split: 1/cos²x − sin x/cos²x = sec²x − sec x tan x (because sin x/cos²x = (1/cos x)(sin x/cos x)). Integrate: tan x − sec x + C.

Key takeaways: learn the table in pairs with the derivatives it comes from, and mind the minus signs. For a linear inside ax + b, divide by a. When the integrand is not in the table, try an identity or split the fraction until each piece is.

Check your understanding

  1. 1. Find ∫ (eˣ + sin x) dx.

    1. eˣ − cos x + C
    2. eˣ + cos x + C
    3. x eˣ + cos x + C
    4. eˣ − sin x + C
    Show answer

    Answer: A. eˣ integrates to itself and sin x integrates to −cos x. So eˣ − cos x + C. Check: d/dx(−cos x) = sin x.

  2. 2. Find ∫ sin 4x dx.

    1. −4 cos 4x + C
    2. (1/4) cos 4x + C
    3. −(1/4) cos 4x + C
    4. −cos 4x + C
    Show answer

    Answer: C. sin integrates to −cos, and the linear inside 4x means dividing by 4: −(1/4) cos 4x + C. Multiplying by 4 instead is the usual slip.

  3. 3. Find ∫ e^(−2x) dx.

    1. −2e^(−2x) + C
    2. −(1/2)e^(−2x) + C
    3. (1/2)e^(−2x) + C
    4. e^(−2x) + C
    Show answer

    Answer: B. Divide by the coefficient of x, which is −2: (1/(−2))e^(−2x) = −(1/2)e^(−2x). Check: the derivative is −(1/2)(−2)e^(−2x) = e^(−2x).

  4. 4. Find ∫ cot²x dx.

    1. −cot x + x + C
    2. −cot x − x + C
    3. cot x − x + C
    4. tan x − x + C
    Show answer

    Answer: B. cot²x = cosec²x − 1, and cosec²x integrates to −cot x. So the integral is −cot x − x + C.

  5. 5. Find ∫ (sec²x + 2/√(1 − x²)) dx.

    1. tan x + 2 tan⁻¹ x + C
    2. sec x + 2 sin⁻¹ x + C
    3. tan x + 2 cos⁻¹ x + C
    4. tan x + 2 sin⁻¹ x + C
    Show answer

    Answer: D. sec²x integrates to tan x, and 1/√(1 − x²) integrates to sin⁻¹ x. The derivative of cos⁻¹ x is −1/√(1 − x²), so 2 cos⁻¹ x has the wrong sign.

Sign in to keep track of the lessons you finish.

Next lesson → Integration by substitution

Privacy · Terms · Refunds · Delivery