Revision notes

Limits and Continuity: Practice

The key points, rules to remember, tables and diagrams from all 9 lessons, on one page for quick revision. To keep a copy, use your browser's Print and choose "Save as PDF".

Lesson 1

Factorising and the xⁿ − aⁿ formula at speed

lim(x→a) (xⁿ − aⁿ)/(x − a) = n aⁿ⁻¹, and for a ratio, lim(x→a) (xᵐ − aᵐ)/(xⁿ − aⁿ) = (m/n) aᵐ⁻ⁿ. The first result also holds for rational n when a > 0.

Key takeaways: substitute first and read the form. Factor out every (x − a), not just one. Use n aⁿ⁻¹ and the ratio rule (m/n) aᵐ⁻ⁿ wherever you can see xⁿ − aⁿ, including rational powers. A 'find n' question is solved by trying small integers in n aⁿ⁻¹.

Read the full lesson

Lesson 2

Rationalising and one-sided traps

Multiply by the conjugate to turn √A − B into A − B², cancel (x − a), then substitute. Remember that √(x²) = |x|, not x.

Key takeaways: a root next to a number in a 0/0 limit needs its conjugate. Rationalise each level separately when roots appear above and below. Treat √(x²) as |x| and check both sides. Read the question carefully to see whether a two-sided or a one-sided limit is wanted.

Read the full lesson

Lesson 3

Trigonometric limits for exams

(sin ax)/(bx) → a/b, (tan ax)/(sin bx) → a/b and (1 − cos ax)/x² → a²/2 as x → 0 (radians). At x → a ≠ 0, substitute x = a ± h first.

Quick results (radians unless stated)
Expression as x → 0Limit
(sin ax)/(bx)a/b
(tan ax)/(sin bx)a/b
(1 − cos ax)/x²a²/2
(1 − cos ax)/(1 − cos bx)a²/b²
(sin x°)/xπ/180

Key takeaways: make each sine or tangent match its own angle in the denominator. Turn 1 − cos into 2 sin² of the half angle. Shift the variable when the limit is not at 0. Always check whether the question uses radians or degrees.

Read the full lesson

Lesson 4

Exponential and logarithmic limits

Rewrite until each piece is a standard form: (eᵃˣ − 1)/(ax) → 1, ln(1 + ax)/(ax) → 1, (1 + ax)^(1/(ax)) → e. Then multiply back the constants you introduced.

Key takeaways: split differences of exponentials by adding and subtracting 1. Scale every argument to match its denominator. For a power of the form (1 + ax)^(1/x), the answer is eᵃ. Convert other log bases to natural logs. The leading-behaviour replacement is a fast check for products and quotients only.

Read the full lesson

Lesson 5

Continuity problems: constants, joins and special functions

At every join: (left formula at a) = (right formula at a) = f(a). One join gives one equation; two unknowns need two joins.

Key takeaways: continuity questions reduce to LHL = RHL = f(a). For unknown constants, write one equation per join. For [x]-type functions, work out both sides and the value separately at each integer. A modulus alone never breaks continuity.

Read the full lesson

Lesson 6

Limits at infinity: ratios, roots and the x → −∞ trap

DegreesLimit as x → ±∞Reason
Numerator lower than denominator0after dividing, the numerator has only terms that vanish
Numerator and denominator equalratio of the leading coefficientsleading terms survive in both
Numerator higher than denominatorno finite limit (±∞)the numerator outgrows the denominator

For x → ∞, divide by the highest power in the denominator. Written in terms of x, √(x²) = |x|, so for x → −∞ it equals −x, not x.

Key takeaways: divide by the dominant term; compare degrees for rational functions; use the conjugate for √ − √ or √ − x; for x → −∞ replace √(x²) by −x or substitute x = −t; for exponentials choose the base that dominates in the direction given.

Read the full lesson

Lesson 7

L'Hôpital's rule: when it helps and when it fails

Check the form first. Only 0/0 or ∞/∞ qualifies. Then differentiate top and bottom separately, and repeat if the form is still indeterminate.

Key takeaways: test the form; differentiate numerator and denominator separately; repeat only while the form stays indeterminate; convert 0 × ∞ and ∞ − ∞ to a single fraction; if the derivative ratio has no limit, use another method.

Read the full lesson

Lesson 8

Limits of the form 1^∞ and other indeterminate powers

If f → 1 and g → ∞, then lim f^g = e^L, where L = lim g(f − 1). If L is +∞ the limit is ∞, and if L is −∞ the limit is 0.

Key takeaways: identify f → 1 and g → ∞; compute L = lim g(f − 1); the answer is e^L; use logarithms for 0⁰ and ∞⁰; do not apply the method to forms that are not 1^∞.

Read the full lesson

Lesson 9

Squeeze theorem, discontinuities and the intermediate value theorem

If |f(x)| ≤ M|g(x)| and g(x) → 0, then f(x) → 0. A bounded factor times a vanishing factor vanishes.

TypeWhat happens at x = aExample
Removablethe limit exists, but f(a) is undefined or differs from the limit(x² − 9)/(x − 3) at x = 3
Jumpleft and right limits exist but are different[x] at x = 2 (left 1, right 2)
Infiniteat least one side tends to ±∞1/x at x = 0
Oscillatingno limit because the values keep swingingsin(1/x) at x = 0

Key takeaways: squeeze bounded oscillation with vanishing bounds; classify a discontinuity by comparing the one-sided limits with f(a); only removable ones can be repaired; the intermediate value theorem guarantees a root only for a function continuous on the closed interval.

Read the full lesson

Privacy · Terms · Refunds · Delivery