- Practice
- About 15 min
- 5 practice questions
Trigonometric limits for exams
Evaluate trigonometric 0/0 limits quickly using sin ax/bx → a/b, the half-angle form of 1 − cos x, and a shift of variable for limits at points other than 0.
If something looks wrong, please tell us.
Trigonometric limits are among the most common limit questions. Almost all of them reduce to the single standard result lim(x→0) (sin x)/x = 1 (x in radians) together with a few identities. This lesson collects the patterns that come up repeatedly and shows how to recognise them at once. Throughout, angles are in radians unless a question says otherwise.
Pattern 1: matching angles
Since (sin ax)/(ax) → 1 and (tan ax)/(ax) → 1 as x → 0, it follows that (sin ax)/(bx) → a/b, (tan ax)/(bx) → a/b and (sin ax)/(sin bx) → a/b for non-zero constants a and b. In a sum such as (tan 3x − sin x)/x, split it into (tan 3x)/x − (sin x)/x and get 3 − 1 = 2.
Pattern 2: 1 − cos
Use 1 − cos θ = 2 sin²(θ/2). Then (1 − cos x)/x² = 2 sin²(x/2)/x² = (1/2) × [sin(x/2)/(x/2)]², which tends to 1/2. More generally, (1 − cos ax)/x² → a²/2.
Worked example 1. Find lim(x→0) (1 − cos 4x)/x². Here 1 − cos 4x = 2 sin² 2x, so the expression is 2 × [(sin 2x)/x]², which tends to 2 × 2² = 8. This agrees with a²/2 = 16/2.
Worked example 2. Find lim(x→0) (x tan x)/(1 − cos x). Write it as [(tan x)/x] × [x²/(1 − cos x)]. The first factor tends to 1 and the second to 1/(1/2) = 2, so the limit is 2.
Pattern 3: limits at a point other than 0
If x → a with a ≠ 0, put x = a + h (or x = a − h), so that h → 0, and simplify with allied-angle identities.
Worked example 3. Find lim(x→π) (sin x)/(π − x). Put x = π − h, with h → 0. Then sin x = sin(π − h) = sin h and π − x = h. The expression becomes (sin h)/h → 1.
Pattern 4: degrees
If x is in degrees, convert first: x degrees = πx/180 radians. Worked example 4. lim(x→0) (sin x°)/x = lim (sin(πx/180))/x = π/180, by pattern 1. This is why the standard result needs radians.
(sin ax)/(bx) → a/b, (tan ax)/(sin bx) → a/b and (1 − cos ax)/x² → a²/2 as x → 0 (radians). At x → a ≠ 0, substitute x = a ± h first.
| Expression as x → 0 | Limit |
|---|---|
| (sin ax)/(bx) | a/b |
| (tan ax)/(sin bx) | a/b |
| (1 − cos ax)/x² | a²/2 |
| (1 − cos ax)/(1 − cos bx) | a²/b² |
| (sin x°)/x | π/180 |
Traps
- Using (sin x)/x → 1 when x → a ≠ 0: at x → π, (sin x)/x → 0, not 1.
- Writing (1 − cos x)/x → 1/2; in fact (1 − cos x)/x → 0, because only x² matches 1 − cos x.
- Forgetting to square a when using 1 − cos ax.
- Working in degrees without converting.
Speed method for sums and differences
When the numerator is a sum or difference of sines and tangents, split the fraction and apply pattern 1 to each part, as with (tan 3x − sin x)/x. When it is a difference of two cosines, either use cos A − cos B = 2 sin((A + B)/2) sin((B − A)/2), or write it as (1 − cos B) − (1 − cos A) and use pattern 2 on each part: (cos 2x − cos 4x)/x² → 16/2 − 4/2 = 6. Both routes give the same answer; choose the one you can do without errors. A difference such as (tan x − sin x)/x needs care: it tends to 1 − 1 = 0, but divided by x³ it is a harder problem that the advanced course treats.
Key takeaways: make each sine or tangent match its own angle in the denominator. Turn 1 − cos into 2 sin² of the half angle. Shift the variable when the limit is not at 0. Always check whether the question uses radians or degrees.
Check your understanding
-
1. What is lim(x→0) (1 − cos 2x)/x², with x in radians?
- 1
- 1/2
- 2
- 4
Show answer
Answer: C. 1 − cos 2x = 2 sin² x, so the expression is 2[(sin x)/x]² → 2.
-
2. What is lim(x→0) (sin 6x)/(tan 2x), with x in radians?
- 1/3
- 3
- 12
- 1
Show answer
Answer: B. (sin 6x)/(tan 2x) → 6/2 = 3, using pattern 1.
-
3. What is lim(x→π/2) (cos x)/(π/2 − x), with x in radians?
- 0
- 1
- −1
- π/2
Show answer
Answer: B. Put x = π/2 − h. Then cos x = cos(π/2 − h) = sin h and π/2 − x = h, so the limit is (sin h)/h → 1.
-
4. What is lim(x→0) (x tan 2x)/(1 − cos 2x), with x in radians?
- 2
- 1/2
- 1
- 4
Show answer
Answer: C. x tan 2x ≈ 2x² near 0 and 1 − cos 2x = 2 sin² x ≈ 2x². Precisely: [(tan 2x)/(2x)] × [2x²/(2 sin² x)] → 1 × 1 = 1.
-
5. If x is measured in degrees, what is lim(x→0) (sin x)/x?
- π/180
- 1
- 180/π
- 0
Show answer
Answer: A. In radians the angle is πx/180, so (sin(πx/180))/x → π/180.
Sign in to keep track of the lessons you finish.