- Foundation
- About 13 min
- 5 practice questions
Finding the general term from a pattern
Read the nth term off a list of terms: use differences for linear and quadratic patterns, ratios for geometric ones, and a factor (−1)ⁿ for alternating signs, then check the rule against every given term.
If something looks wrong, please tell us.
Earlier you were given a formula and asked for terms. Often the question runs the other way: you see 4, 7, 10, 13, ... and must find a rule that gives the nth term. This is detective work, and it rewards a small toolkit of patterns. One warning first: a few terms never fix a sequence completely, because many rules can start the same way. In a school or exam problem you are expected to find the simplest rule that fits every term shown, so always test your rule on all the given terms, not just the first.
Look at the differences
Subtract each term from the next. If the first differences are all equal to d, the sequence is linear in n: aₙ = dn + c, where c is chosen to fit the first term. If the first differences are not equal but the second differences (differences of the differences) are all equal, the rule is quadratic, and the coefficient of n² is half the second difference.
Look at the ratios
Divide each term by the one before it. A constant ratio r means a geometric pattern aₙ = a·rⁿ⁻¹. For 3, 6, 12, 24 the ratio is 2 and aₙ = 3·2ⁿ⁻¹.
Look for familiar shapes
| Terms | Rule | Idea |
|---|---|---|
| 1, 4, 9, 16 | n² | squares |
| 2, 6, 12, 20 | n(n + 1) | product of consecutive numbers |
| 2, 4, 8, 16 | 2ⁿ | powers of 2 |
| 1/2, 2/3, 3/4, 4/5 | n/(n + 1) | numerator n, denominator one more |
| 1, −1, 1, −1 | (−1)ⁿ⁺¹ | sign flips each time |
An alternating sign comes from a power of −1. Use (−1)ⁿ⁺¹ when the first term is positive and (−1)ⁿ when it is negative. Multiply it by the size pattern: 1, −2, 3, −4 has sizes 1, 2, 3, 4, so aₙ = (−1)ⁿ⁺¹ n.
Equal first differences d give aₙ = dn + c. Equal second differences give a quadratic whose n² coefficient is half the second difference. A constant ratio r gives a·rⁿ⁻¹. Always test the rule on every given term.
Worked example 1: a linear pattern
Find the 20th term of 5, 9, 13, 17, ... The differences are 4, 4, 4, so aₙ = 4n + c. Putting n = 1 gives 4 + c = 5, so c = 1 and aₙ = 4n + 1. Check: n = 4 gives 17. Then a₂₀ = 4(20) + 1 = 81.
Worked example 2: a quadratic pattern
Find the nth term of 4, 7, 12, 19, 28, ... First differences: 3, 5, 7, 9. Second differences: 2, 2, 2. The coefficient of n² is 2/2 = 1, so aₙ = n² + bn + c. Take away n² from each term: 3, 3, 3, 3, 3. The leftover is constant, so aₙ = n² + 3. Check: n = 5 gives 28.
Worked example 3: alternating signs
Find the nth term of 1, −4, 9, −16, 25, ... The sizes are 1, 4, 9, 16, 25, which are n². The first term is positive, so the sign factor is (−1)ⁿ⁺¹. Hence aₙ = (−1)ⁿ⁺¹ n². Then a₇ = +49 and a₈ = −64.
Worked example 4: a fraction pattern
Find the nth term of 2/3, 4/5, 6/7, 8/9, ... The numerators 2, 4, 6, 8 are 2n, and the denominators 3, 5, 7, 9 are 2n + 1. So aₙ = 2n/(2n + 1). The 10th term is 20/21.
Common mistakes
- Testing the rule only on the first term. Many wrong rules fit one term.
- Using (−1)ⁿ when the first term is positive; (−1)¹ = −1 gives a negative first term.
- Taking the second difference itself as the coefficient of n². It is half of it.
- Forgetting that a pattern guessed from a few terms is only the simplest rule that fits.
Key takeaways: equal first differences mean a linear rule, equal second differences mean a quadratic rule, equal ratios mean a geometric rule, and a power of −1 makes signs alternate. Split a hard pattern into parts, such as sign, numerator and denominator, and find each part separately.
Check your understanding
-
1. What is the nth term of 7, 10, 13, 16, ...?
- 3n + 7
- 3n + 4
- 4n + 3
- 3n + 3
Show answer
Answer: B. The common difference is 3, so aₙ = 3n + c. At n = 1, 3 + c = 7, so c = 4. The rule is 3n + 4.
-
2. What is the 10th term of 2, 6, 12, 20, 30, ...?
- 100
- 120
- 90
- 110
Show answer
Answer: D. The terms are n(n + 1): 1×2, 2×3, 3×4, 4×5, 5×6. For n = 10 this is 10 × 11 = 110.
-
3. Which rule gives 1, −2, 3, −4, 5, ...?
- (−1)ⁿ⁺¹ n
- (−1)ⁿ n
- (−1)ⁿ⁺¹ n²
- (−1)ⁿ (n + 1)
Show answer
Answer: A. The sizes are 1, 2, 3, 4, 5, which is n. The first term is positive, so the sign factor is (−1)ⁿ⁺¹.
-
4. The sequence 3, 8, 15, 24, ... has first differences 5, 7, 9 and second differences 2. What is its 6th term?
- 45
- 35
- 48
- 50
Show answer
Answer: C. The coefficient of n² is 1. Taking n² away leaves 2, 4, 6, 8, which is 2n. So aₙ = n² + 2n, and a₆ = 36 + 12 = 48.
-
5. What is the 9th term of 1/2, 2/3, 3/4, 4/5, ...?
- 10/11
- 8/9
- 9/11
- 9/10
Show answer
Answer: D. The numerator is n and the denominator is n + 1, so aₙ = n/(n + 1). For n = 9 this is 9/10.
Sign in to keep track of the lessons you finish.