• Foundation
  • About 17 min
  • 5 practice questions

Planes in three forms: general, vector and normal; parallel and perpendicular planes

Move between the general, vector and normal forms of a plane, read off the distance from the origin, and use normals to write planes parallel or perpendicular to a given plane or line.

If something looks wrong, please tell us.

A plane is described completely by one point and a normal vector. This lesson shows three ways of writing the same plane, how to move between them, and how to use normals to write down planes that are parallel or perpendicular to something already given.

The general and the vector form

The general form is Ax + By + Cz + D = 0, and (A, B, C) are direction ratios of a normal. The vector form is r · n = d, where r = xî + yĵ + zk̂. Taking n = Aî + Bĵ + Ck̂, the dot product gives Ax + By + Cz = d, so the two forms carry the same information, with d = −D. For example, r · (2î − 2ĵ + k̂) = 9 is the plane 2x − 2y + z = 9.

The normal form

Divide the vector form by the length of the normal. If n̂ = n/|n| is the unit normal and p = d/|n|, the plane is r · n̂ = p. When p is positive it is the perpendicular distance of the plane from the origin, and n̂ points from the origin towards the plane. In Cartesian form this is lx + my + nz = p, where l, m, n are the direction cosines of the normal. To reach this form, move the constant to the right-hand side, change every sign if needed so that p is positive, then divide by √(A² + B² + C²).

Parallel and perpendicular planes

  • Parallel planes have proportional normals. A plane parallel to Ax + By + Cz + D = 0 has the form Ax + By + Cz + D′ = 0, with only the constant changed.
  • Perpendicular planes have perpendicular normals: A₁A₂ + B₁B₂ + C₁C₂ = 0.
  • A plane perpendicular to a line has the direction of the line as its normal.

The coefficients of x, y, z are the normal. Parallel: same normal, new constant. Perpendicular to another plane: dot product of normals is zero. Normal form: divide by the length of the normal to read the distance from the origin.

Worked example 1: vector to normal form

Write r · (2î − 2ĵ + k̂) = 9 in normal form. The normal has length √(4 + 4 + 1) = 3, so dividing by 3 gives r · (2î − 2ĵ + k̂)/3 = 3. The plane is at distance 3 from the origin, and the unit normal has direction cosines 2/3, −2/3, 1/3.

Worked example 2: a plane with a negative constant

Find the distance from the origin of 6x − 3y + 2z + 14 = 0 and its direction cosines. Write 6x − 3y + 2z = −14. The right side is negative, so multiply by −1: −6x + 3y − 2z = 14. The normal (−6, 3, −2) has length √(36 + 9 + 4) = 7, so dividing by 7 gives (−6/7)x + (3/7)y − (2/7)z = 2. The distance is 2 and the direction cosines of the normal pointing from the origin to the plane are −6/7, 3/7, −2/7.

Worked example 3: parallel and perpendicular

(a) Find the plane through (1, −2, 3) parallel to 4x − y + 2z = 5. Keep the normal and substitute the point: 4(1) − (−2) + 2(3) = 12, so the plane is 4x − y + 2z = 12. (b) Find the plane through (1, −2, 3) perpendicular to the line joining A(2, 1, 1) and B(5, −1, 3). The direction AB = (3, −2, 2) is the normal, so 3x − 2y + 2z = 3(1) − 2(−2) + 2(3) = 13. The plane is 3x − 2y + 2z = 13.

Worked example 4: finding unknown constants

For what values of p and q is px + 6y + qz = 1 parallel to x − 2y + 3z = 4? The normals (p, 6, q) and (1, −2, 3) must be proportional. From 6 = −2t we get t = −3, so p = −3 and q = −9. The first plane is x − 2y + 3z = −1/3, so the two are parallel and distinct. Next, for what k is kx + 3y − 2z = 5 perpendicular to 2x − y + 2z = 3? The dot product is 2k − 3 − 4 = 0, so k = 7/2.

Key takeaways. The same plane has a general, a vector and a normal form. The normal form gives the distance from the origin, once the constant is made positive. Parallel planes share a normal and differ in the constant; perpendicular planes have normals with dot product zero.

Check your understanding

  1. 1. Which vector is a unit normal to the plane 3x − 4y + 12z = 26?

    1. (3î − 4ĵ + 12k̂)/13
    2. (3î − 4ĵ + 12k̂)/26
    3. (3î − 4ĵ + 12k̂)/5
    4. (3î − 4ĵ + 12k̂)/12
    Show answer

    Answer: A. The normal has length √(9 + 16 + 144) = 13. A unit vector divides the normal by its length. The number 26 is the constant on the right, not the length of the normal.

  2. 2. Which plane passes through (2, −1, 3) and is parallel to x + 2y − 2z = 7?

    1. x + 2y − 2z = 6
    2. x + 2y − 2z = 7
    3. x + 2y − 2z = −6
    4. x − 2y + 2z = −6
    Show answer

    Answer: C. Keep the normal and find the constant: 2 + 2(−1) − 2(3) = 2 − 2 − 6 = −6. The answer 6 comes from a sign slip, and 7 is the original plane.

  3. 3. For what value of k are the planes 2x + 3y − z = 4 and x − y + kz = 2 perpendicular?

    1. 1
    2. −1
    3. 5
    4. −5
    Show answer

    Answer: B. The normals must have dot product zero: 2(1) + 3(−1) + (−1)k = 2 − 3 − k = 0, so k = −1.

  4. 4. Which point lies on the plane r · (î − 2ĵ + 2k̂) = 6?

    1. (2, 1, 1)
    2. (1, 2, 3)
    3. (3, 1, 1)
    4. (2, −1, 1)
    Show answer

    Answer: D. The plane is x − 2y + 2z = 6. For (2, −1, 1) we get 2 + 2 + 2 = 6. The other points give 2, 3 and 3.

  5. 5. What is the distance of the plane 2x − 3y + 6z + 21 = 0 from the origin?

    1. 7
    2. 3
    3. 21
    4. 1/3
    Show answer

    Answer: B. The normal has length √(4 + 9 + 36) = 7, and the constant has size 21. The distance from the origin is |21|/7 = 3.

Privacy · Terms · Refunds · Delivery