Revision notes

Three-Dimensional Geometry: Foundation

The key points, rules to remember, tables and diagrams from all 9 lessons, on one page for quick revision. To keep a copy, use your browser's Print and choose "Save as PDF".

Lesson 1

Coordinate axes, planes and octants

Points on the axes and the coordinate planes
Where the point isForm of its coordinates
On the x-axis(x, 0, 0)
On the y-axis(0, y, 0)
On the z-axis(0, 0, z)
In the xy-plane(x, y, 0)
In the yz-plane(0, y, z)
In the zx-plane(x, 0, z)
The origin(0, 0, 0)
Signs of the coordinates in each octant
OctantIIIIIIIVVVIVIIVIII
Sign of x+−−++−−+
Sign of y++−−++−−
Sign of z++++−−−−

Point P(x, y, z): its distances from the yz-, zx- and xy-planes are |x|, |y| and |z|. Its distances from the x-, y- and z-axes are √(y² + z²), √(z² + x²) and √(x² + y²): leave out the coordinate of that axis.

Key takeaways. Three mutually perpendicular axes give every point three coordinates. The coordinate planes are x = 0, y = 0 and z = 0, and they cut space into eight octants that you read from the signs. Distances from the planes are single coordinates; distances from the axes use Pythagoras with the other two coordinates.

Read the full lesson

Lesson 2

The distance formula in three dimensions

PQ = √((x₂ − x₁)² + (y₂ − y₁)² + (z₂ − z₁)²). From the origin: OP = √(x² + y² + z²).

Key takeaways. Subtract the coordinates, square, add, then take the root. Use squared distances to compare lengths and to find unknown points, because equal distances have equal squares. Three points are collinear when the longest distance is the sum of the other two.

Read the full lesson

Lesson 3

Section formula, midpoint and centroid

Internal m : n gives ((mx₂ + nx₁)/(m + n), (my₂ + ny₁)/(m + n), (mz₂ + nz₁)/(m + n)). External m : n: change + n to − n everywhere. Midpoint = average of the two ends; centroid = average of the three vertices.

Key takeaways. In the section formula the ratio part next to A multiplies B's coordinates. For external division change the plus signs before n to minus signs. To find an unknown ratio, take it as k : 1, apply the condition to one coordinate and read the sign of k: positive means internal, negative means external.

Read the full lesson

Lesson 4

Direction cosines and direction ratios

l = cos α, m = cos β, n = cos γ, and l² + m² + n² = 1. From direction ratios a, b, c: l = a/√(a² + b² + c²), m = b/√(a² + b² + c²), n = c/√(a² + b² + c²), with the opposite signs for the opposite direction. Through two points, the direction ratios are the differences of the coordinates.

Key takeaways. Direction cosines are the cosines of the angles with the axes and satisfy l² + m² + n² = 1. Direction ratios are any multiples of them; through two points they are the coordinate differences. Divide by the length to get cosines, and use the sum of products for the angle between two lines.

Read the full lesson

Lesson 5

Equations of a line and a plane: the basics

Line: r = a + λb, or (x − x₁)/a = (y − y₁)/b = (z − z₁)/c, with general point (x₁ + aλ, y₁ + bλ, z₁ + cλ). Plane: A(x − x₁) + B(y − y₁) + C(z − z₁) = 0, where (A, B, C) is a normal; intercepts a, b, c give x/a + y/b + z/c = 1.

Key takeaways. A line needs a point and a direction; a plane needs a point and a normal. In a Cartesian line the denominators are the direction and the numerators give the point with the sign changed. In a plane Ax + By + Cz + D = 0 the coefficients are the normal. Always check your answer by substituting the given points.

Read the full lesson

Lesson 6

Shapes in space: parallelograms, rectangles, rhombuses and tetrahedra from coordinates

ShapeWhat to check, once it is a parallelogram
RectangleThe diagonals are equal in length (or one angle is a right angle)
RhombusTwo adjacent sides are equal in length
SquareBoth: adjacent sides equal and diagonals equal
Right triangleThe square of one side equals the sum of the squares of the other two
Regular tetrahedronAll six edges are equal in length

Rule to remember: opposite vertices of a parallelogram share a midpoint, so D = A + C − B. Add a test of equal diagonals for a rectangle, equal adjacent sides for a rhombus, and compare squares of distances.

Key takeaways. The fourth vertex of ABCD is A + C − B. Rectangles are tested by equal diagonals, rhombuses by equal adjacent sides. Use squared distances. A regular tetrahedron needs all six edges equal, so count them before you declare it regular.

Read the full lesson

Lesson 7

Projections: the shadow of a segment on an axis, a plane and a line

Projection of PQ on a line with direction cosines l, m, n = lΔx + mΔy + nΔz. On an axis, take the difference of that coordinate. On a coordinate plane, drop the missing coordinate in the distance formula.

Key takeaways. Projection on an axis is a difference of coordinates; on a coordinate plane it is a plane distance. On a line, use lΔx + mΔy + nΔz with direction cosines, or divide by the length of the direction ratios. The projection and the perpendicular part satisfy Pythagoras: PQ² = projection² + perpendicular². A zero projection means perpendicular.

Read the full lesson

Lesson 8

Lines in space: reading an equation, general points and where a line meets the coordinate planes

To meet the xy-plane put z = 0, to meet the yz-plane put x = 0, to meet the zx-plane put y = 0. Solve for λ first, then find the point.

Key takeaways. Scale the denominators freely, but never change a numerator's sign convention. A zero denominator means that coordinate stays fixed. To meet a coordinate plane, set one coordinate to zero and solve for λ. Parallel lines have proportional direction ratios; to tell whether they coincide, test one point.

Read the full lesson

Lesson 9

Planes in three forms: general, vector and normal; parallel and perpendicular planes

The coefficients of x, y, z are the normal. Parallel: same normal, new constant. Perpendicular to another plane: dot product of normals is zero. Normal form: divide by the length of the normal to read the distance from the origin.

Key takeaways. The same plane has a general, a vector and a normal form. The normal form gives the distance from the origin, once the constant is made positive. Parallel planes share a normal and differ in the constant; perpendicular planes have normals with dot product zero.

Read the full lesson

Privacy · Terms · Refunds · Delivery