- Foundation
- About 14 min
- 5 practice questions
Multiplying by a scalar and position vectors
Multiply a vector by a number and describe its new magnitude and direction, test collinearity with b = λa, and use position vectors to write AB = b − a.
If something looks wrong, please tell us.
Doubling a displacement means going twice as far in the same direction; reversing it means going the same distance backwards. Multiplying a vector by a number captures both ideas. This lesson introduces scalar multiplication, uses it to describe collinear vectors, and then introduces position vectors, which allow any vector between two points to be written in terms of where those points are.
Multiplying a vector by a scalar
If a is a vector and λ is a real number, then λa is the vector whose magnitude is |λ| × |a| and whose direction is the same as a if λ > 0 and opposite to a if λ < 0. If λ = 0, or a = 0, then λa is the zero vector. For example, if |a| = 4, then 3a has magnitude 12 in the direction of a, and −3a has magnitude 12 in the opposite direction. Also (−1)a = −a, the negative of a.
|λa| = |λ| |a|. λ > 0 keeps the direction, λ < 0 reverses it.
Scalar multiplication behaves as you would hope with addition: λ(a + b) = λa + λb, (λ + μ)a = λa + μa and λ(μa) = (λμ)a. So expressions such as 2(a + 3b) − (a − b) can be simplified like algebra: 2a + 6b − a + b = a + 7b.
Collinear vectors
Two non-zero vectors a and b are collinear exactly when one is a scalar multiple of the other: b = λa for some real λ. If λ > 0 they point the same way, if λ < 0 opposite ways. A consequence is very useful: if a and b are non-zero and not collinear, and xa + yb = 0, then x = 0 and y = 0. Otherwise one would be a multiple of the other.
Position vectors
Fix a point O, called the origin. The position vector of a point P is the vector OP. We usually write a for the position vector of A, b for B, and so on. Now, by the triangle law, OA + AB = OB, so AB = OB − OA, that is
AB = b − a: the vector from A to B is (position vector of B) − (position vector of A). End minus start.
This formula turns geometry into algebra. For three points A, B, C, they lie on one line (are collinear) exactly when AB and AC are collinear vectors, that is when c − a = λ(b − a) for some λ.
Worked example 1: magnitudes and directions
If |a| = 5, describe −2a and (1/5)a. −2a has magnitude |−2| × 5 = 10 and direction opposite to a. (1/5)a has magnitude 5/5 = 1 and the direction of a, so it is a unit vector in the direction of a. Dividing a non-zero vector by its magnitude always gives a unit vector in its direction.
Worked example 2: equating coefficients
a and b are non-zero, non-collinear vectors and (x − 2)a + (y + 1)b = 0. Find x and y. Since a and b are not collinear, both coefficients must be zero: x − 2 = 0 and y + 1 = 0, so x = 2, y = −1.
Worked example 3: collinear points
Points A, B, C have position vectors a, b and c = 3b − 2a. Show that they are collinear. AB = b − a. AC = c − a = 3b − 2a − a = 3b − 3a = 3(b − a) = 3AB. So AC is a multiple of AB, and since the two vectors share the point A, the points A, B, C lie on one line, with AC three times as long as AB.
Key takeaways
λa has magnitude |λ||a| and keeps or reverses direction according to the sign of λ. Non-zero vectors are collinear exactly when one is a multiple of the other. Position vectors are measured from a fixed origin, and AB = b − a, end minus start. These tools lead directly to components in the next lesson.
Check your understanding
-
1. If |a| = 4, what is |−3a|?
- −12
- 7
- 12
- 1
Show answer
Answer: C. |λa| = |λ||a| = 3 × 4 = 12. A magnitude is never negative.
-
2. How does −2a compare with a non-zero vector a?
- Same direction, twice the magnitude
- Opposite direction, half the magnitude
- Same direction, magnitude reduced by 2
- Opposite direction, twice the magnitude
Show answer
Answer: D. For λ = −2, |λ| = 2 doubles the length and the negative sign reverses the direction.
-
3. A and B have position vectors a and b. What is vector AB?
- b − a
- a − b
- a + b
- (a + b)/2
Show answer
Answer: A. OA + AB = OB, so AB = OB − OA = b − a: end minus start.
-
4. a and b are non-zero, non-collinear vectors and (x − 2)a + (y + 1)b = 0. What is x + y?
- 3
- −1
- 1
- −3
Show answer
Answer: C. Both coefficients must be zero: x = 2 and y = −1, so x + y = 1.
-
5. Points P, Q, R have position vectors p, q, r with r − p = 3(q − p). Which statement is true?
- PQ is perpendicular to PR
- P, Q and R are collinear
- R is the midpoint of PQ
- P, Q and R form a triangle
Show answer
Answer: B. PR = r − p = 3(q − p) = 3PQ, so PR and PQ are collinear vectors with the common point P, and the three points lie on one line.
Sign in to keep track of the lessons you finish.