Revision notes

Vectors: Foundation

The key points, rules to remember, tables and diagrams from all 9 lessons, on one page for quick revision. To keep a copy, use your browser's Print and choose "Save as PDF".

Lesson 1

Scalars, vectors and the types of vectors

A vector has magnitude and direction. Vector AB points from the initial point A to the terminal point B, and its magnitude |AB| is the length AB.

Common types of vectors
TypeMeaning
Zero (null) vectorInitial and terminal points coincide; magnitude 0; its direction is not defined
Unit vectorMagnitude exactly 1
Coinitial vectorsVectors with the same initial point
Collinear (parallel) vectorsVectors parallel to the same line, whatever their magnitudes or senses
Equal vectorsSame magnitude and same direction, whatever their initial points
Negative of a vectorSame magnitude, opposite direction: −AB = BA

Scalars have magnitude only; vectors have magnitude and direction. A vector is drawn as a directed line segment, and its magnitude is the length of that segment. The main types are zero, unit, coinitial, collinear, equal and negative vectors. Equal vectors may start at different points. In the next lesson you will add vectors together.

Read the full lesson

Lesson 2

Adding vectors: the triangle and parallelogram laws

Triangle law: AB + BC = AC. Join the vectors head to tail; the sum runs from the first tail to the last head.

Add vectors head to tail (triangle law) or as the diagonal of a parallelogram from a common point (parallelogram law); both give the same sum. Addition is commutative and associative. Going round a closed figure gives the zero vector. Subtraction means adding the negative. The magnitude of a sum is generally not the sum of the magnitudes.

Read the full lesson

Lesson 3

Multiplying by a scalar and position vectors

|λa| = |λ| |a|. λ > 0 keeps the direction, λ < 0 reverses it.

AB = b − a: the vector from A to B is (position vector of B) − (position vector of A). End minus start.

λa has magnitude |λ||a| and keeps or reverses direction according to the sign of λ. Non-zero vectors are collinear exactly when one is a multiple of the other. Position vectors are measured from a fixed origin, and AB = b − a, end minus start. These tools lead directly to components in the next lesson.

Read the full lesson

Lesson 4

Components, magnitude and unit vectors

If r = xi + yj + zk, then |r| = √(x² + y² + z²), and the unit vector in the direction of r is r/|r|.

With axes and the unit vectors i, j, k, a vector is described by its components. The magnitude is the square root of the sum of the squares of the components, and dividing by it gives a unit vector. Add, subtract and multiply by scalars component by component, and find AB as end minus start. These rules prepare you for the section formula and direction cosines.

Read the full lesson

Lesson 5

Section formula and direction cosines

Internal division in the ratio m : n: r = (mb + na)/(m + n). External division: r = (mb − na)/(m − n), m ≠ n. Midpoint: r = (a + b)/2.

For r = xi + yj + zk: l = x/|r|, m = y/|r|, n = z/|r|, and l² + m² + n² = 1.

The point dividing AB internally in the ratio m : n has position vector (mb + na)/(m + n); externally, (mb − na)/(m − n); the midpoint is (a + b)/2. Direction cosines are the cosines of the angles with the axes, equal to the components divided by the magnitude, and their squares add to 1. Dot and cross products, which build on all of this, come in the next course.

Read the full lesson

Lesson 6

The polygon law and vectors in figures: hexagons, medians and parallelograms

Polygon law: AB + BC + CD + … + YZ = AZ. A closed chain sums to the zero vector. In a figure, choose two vectors as a base and write the others from them.

Key takeaways. The polygon law adds a chain of vectors head to tail, and a closed chain sums to zero. Choose a base of two vectors, express everything else with it, and check by adding round the figure. Midpoint results follow by writing each vector from the base.

Read the full lesson

Lesson 7

Vectors in the plane from magnitude and angle: components, direction and the resultant of forces

Signs of (x, y)QuadrantAngle θ from the positive x-axis
(+, +)FirstReference angle α
(−, +)Second180° − α
(−, −)Third180° + α
(+, −)Fourth360° − α

Components: x = r cos θ, y = r sin θ. Magnitude: √(x² + y²). Find the quadrant from the signs first; then the angle is the reference angle from the correct axis. Forces at a point add component by component.

Key takeaways. Use r cos θ and r sin θ to build components, and add components to add vectors. Decide the quadrant from the signs before you quote an angle. A balancing force is minus the sum of the other forces.

Read the full lesson

Lesson 8

Position vectors in geometry: centroid, the fourth vertex and collinear points

Centroid: (a + b + c)/3, dividing each median 2 : 1 from the vertex. Parallelogram ABCD: d = a + c − b. Collinear: c − a = λ(b − a).

Key takeaways. The centroid is the average of the vertices and divides each median 2 : 1. The fourth vertex of ABCD is a + c − b. For collinearity, one of AB and AC must be a multiple of the other, and every component must give the same multiple.

Read the full lesson

Lesson 9

The dot product from first principles: meaning, the sign of the angle and first uses

Angle between a and bcos θa · b
Acute (less than 90°)PositivePositive
Right angle (90°)ZeroZero
Obtuse (more than 90°)NegativeNegative

a · b = |a||b| cos θ = a₁b₁ + a₂b₂ (+ a₃b₃). Positive means acute, zero means perpendicular, negative means obtuse. a · a = |a|².

Key takeaways. The dot product is |a||b| cos θ, or the sum of the products of matching components. Its sign tells you whether the angle is acute, right or obtuse. Zero means perpendicular, and a · a = |a|².

Read the full lesson

Privacy · Terms · Refunds · Delivery