• Practice
  • About 13 min
  • 5 practice questions

Location questions: which factor pulls which industry

Match industries to their dominant location factor, compare two sites by total cost, and judge statement questions on weight-losing, perishable and footloose industries.

If something looks wrong, please tell us.

Location questions are usually one of three kinds: match an industry to the factor that pulls it, compare two sites with a small calculation, or decide whether a statement is true. This lesson gives a table to learn, a cost method, and the traps in statement questions. Figures are illustrative.

The matching table

IndustryDominant pullReason
Sugar millingRaw materialCane is bulky, loses weight and spoils quickly
CementRaw materialLimestone is heavy and loses weight in burning
Iron and steelRaw materials (ore, coal)Large weight of inputs for each tonne of steel
AluminiumPowerSmelting uses very large amounts of electricity
Bakery and dairyMarketFresh products spoil and are bulky to carry
Soft-drink bottlingMarketWater is added locally; finished drinks are bulky
Software and designFootlooseInputs and products are light; skilled people decide the site
Ready-made garmentsLabour and portsLabour intensive; goods are light and exported

The cost method

Add up the costs that differ between the sites: transport of materials, transport of products, wages and power. Pick the lowest total. If the question gives a weight loss, carry the lighter item. Carrying cost = tonnes x distance x rate. Do not compare only the transport cost, since a cheap labour site can win even if freight is higher.

Worked example 1: matching

Example 1. Match: (a) aluminium smelter, (b) bread bakery, (c) cement plant, (d) software firm. Step 1: ask what the main cost or constraint is. Smelting is power-hungry: (a) power. Bread spoils: (b) market. Limestone is heavy: (c) raw material. Software has light inputs and outputs: (d) footloose.

Worked example 2: source or market?

Example 2. One tonne of product needs 3 tonnes of material. The market is 200 km from the material source and freight is ₹2 per tonne per km. At the source, 1 tonne of product travels: 1 x 200 x 2 = ₹400. At the market, 3 tonnes of material travel: 3 x 200 x 2 = ₹1,200. Source saves ₹800 on transport. Now add labour: wages are ₹900 at the source but only ₹250 at the market. Total at source = 400 + 900 = ₹1,300. Total at market = 1,200 + 250 = ₹1,450. The source still wins, by ₹150, because the labour saving of ₹650 is smaller than the extra freight of ₹800.

Worked example 3: a statement question

Example 3. Decide: (i) All industries locate near their raw materials. (ii) A perishable input pulls industry towards its source. (iii) A weight-gaining process is drawn to the market. Step 1: statement (i) says all, which is too broad, since footloose and weight-gaining industries do not. It is false. Step 2: (ii) and (iii) are true. The answer is (ii) and (iii) only.

Traps

  • Reading 'weight-losing' as 'cheap to carry'; it means the product is lighter than the inputs.
  • Forgetting the other costs: a lower freight bill is not always a lower total cost.
  • Treating aluminium or software as raw-material industries.
  • Accepting statements that use all, always or only.

Weight-losing or perishable input: materials. Weight-gaining or perishable product: market. Power-hungry: power. Light inputs and outputs: footloose. Always compare total cost.

— Rule to remember

Key takeaways

  • Learn the pull of each major industry.
  • Carrying cost = tonnes x distance x rate; carry the lighter item.
  • Include labour and power in the comparison.
  • Distrust extreme words in statements.

Check your understanding

  1. 1. Which industry is typically market-oriented?

    1. Iron smelting
    2. Bakery products
    3. Sugar milling
    4. Cement from limestone
    Show answer

    Answer: B. Fresh bread spoils and is bulky, so bakeries locate near buyers. The others are drawn to heavy raw materials.

  2. 2. An aluminium smelter is drawn mainly to

    1. skilled software workers
    2. a large local market
    3. cheap and abundant power
    4. a perishable raw material
    Show answer

    Answer: C. Smelting uses huge amounts of electricity, so power cost decides the site.

  3. 3. In Example 2, with wages of ₹900 at the source and ₹250 at the market, the better site and saving are

    1. the source, by ₹150
    2. the market, by ₹150
    3. the source, by ₹800
    4. the market, by ₹650
    Show answer

    Answer: A. Source = 400 + 900 = 1,300; market = 1,200 + 250 = 1,450, so the source is cheaper by ₹150.

  4. 4. One tonne of product needs 3 tonnes of material, the distance is 200 km and freight is ₹2 per tonne-km. Moving the product instead of the material saves

    1. ₹1,600
    2. ₹1,200
    3. ₹400
    4. ₹800
    Show answer

    Answer: D. Material: 3 x 200 x 2 = 1,200. Product: 1 x 200 x 2 = 400. Saving = ₹800.

  5. 5. Which statement is correct?

    1. Every industry locates near raw materials
    2. A perishable input pulls industry towards its source
    3. Weight-gaining industries go to the raw material
    4. Footloose industries always need coal
    Show answer

    Answer: B. Perishable inputs must be processed soon after harvest, so the industry settles near the source.

Privacy · Terms · Refunds · Delivery