• Foundation
  • About 12 min
  • 5 practice questions

Securing water: roofs, wells and desalination

Learn how islanders collect, protect and make fresh water, and practise a simple rainwater calculation.

If something looks wrong, please tell us.

With no rivers, island people have built a mix of old and new ways to get water. This lesson brings together rainwater harvesting, careful use of wells and desalination, and shows how to do a basic calculation of how much rain a roof can collect.

By the end of this lesson you can

  • Explain rainwater harvesting and its steps.
  • Describe desalination and the LTTD plant at Kavaratti.
  • Calculate a roof's rainwater yield with illustrative numbers.

Rainwater harvesting

Rainwater harvesting means catching rain where it falls and storing it. On an island, rain from a roof runs through a gutter, passes a filter to remove leaves and dirt, and is stored in a tank. Harvested water is clean and fresh, and it takes pressure off the lens. It must be stored in a covered tank to stop insects and dirt.

From roof to tank

  1. Rain falls on the roof Clean, hard surface
  2. Gutter collects it Leads to a pipe
  3. Filter removes dirt Leaves and dust
  4. Covered tank stores it Used in the dry months

Desalination

Desalination removes salt from sea water to make fresh water. Kavaratti has a plant using low temperature thermal desalination (LTTD). The method uses the difference in temperature between warm surface sea water and cold deep sea water. Warm surface water is made to evaporate at low pressure, the vapour is cooled by the cold deep water, and it condenses into fresh water. It is an Indian-developed technology that suits islands with deep water close by.

Using the lens wisely

  • Keep wells shallow and avoid pumping too hard.
  • Keep toilets and waste pits away from wells, because the ground is porous and dirty water can seep in.
  • Fix leaks and avoid waste, since every litre saved reduces pressure on the lens.
Three sources compared
SourceStrengthWeakness
Freshwater lens and wellsAlways at hand, uses rainCan turn salty if over-pumped
Rainwater harvestingClean fresh waterDepends on the season; needs tanks
Desalination (LTTD)Uses the sea, which never runs outNeeds a plant and care to run

Calculating a roof's yield (illustrative numbers)

Volume of rain caught = roof area x rainfall depth x efficiency. Use metres so that one square metre with one metre of rain equals one cubic metre, which is 1,000 litres. Efficiency allows for spills and losses.

Exam-style example 1

Question: 'Which technology in Kavaratti uses warm surface and cold deep sea water?' Working: LTTD, low temperature thermal desalination.

Exam-style example 2

Illustrative numbers (not real data): a roof of 40 square metres receives 0.5 m of rain in a season, and 80 percent is caught. Working: 40 x 0.5 = 20 cubic metres. 80 percent of 20 = 16 cubic metres = 16,000 litres.

Exam-style example 3

Illustrative: a family needs 200 litres a day. How many days does 16,000 litres last? Working: 16,000 divided by 200 = 80 days.

Harvest rain: roof, gutter, filter, covered tank. Yield = area x rain depth x efficiency (1 cubic metre = 1,000 litres). LTTD = warm surface water plus cold deep water, at Kavaratti.

Key takeaways

  • Rainwater harvesting catches roof rain in covered tanks.
  • LTTD at Kavaratti makes fresh water from sea water using a temperature difference.
  • Wells must be shallow and protected from waste.
  • Saving water protects the lens.
  • Use yield = area x depth x efficiency, with units checked.

Check your understanding

  1. 1. Which plant at Kavaratti uses the temperature difference between surface and deep sea water?

    1. LTTD plant
    2. Hydro-electric dam
    3. Canal lift
    4. Salt pan
    Show answer

    Answer: A. Low temperature thermal desalination uses that difference.

  2. 2. Illustrative: roof 30 square metres, 0.4 m rain, all caught. How much water in cubic metres?

    1. 15
    2. 1.2
    3. 12
    4. 120
    Show answer

    Answer: C. 30 x 0.4 = 12 cubic metres, which is 12,000 litres.

  3. 3. Why must a rainwater tank be covered?

    1. To make water salty
    2. To stop dirt and insects
    3. To heat water
    4. To make rain fall
    Show answer

    Answer: B. A cover protects stored water.

  4. 4. Which action helps protect a lens?

    1. Fixing leaks and saving water
    2. Dumping waste near wells
    3. Mixing in sea water
    4. Digging wells deeper and pumping harder
    Show answer

    Answer: D. Saving water lowers abstraction.

  5. 5. Desalination means

    1. adding salt to wells
    2. removing salt from sea water
    3. building a river
    4. storing rain only
    Show answer

    Answer: B. Desalination makes fresh water from salt water.

Privacy · Terms · Refunds · Delivery