- Practice
- About 14 min
- 5 practice questions
Basic constructions you will need
Revise the constructions used throughout this chapter: the perpendicular bisector, a parallel line through a point, copying an angle, a triangle from three sides, and dividing a segment into equal parts or in a given ratio.
If something looks wrong, please tell us.
By the end of this lesson you can
- Draw a perpendicular bisector, a parallel line through a given point, and an angle equal to a given angle, with ruler and compass.
- Construct a triangle when its three sides are known.
- Divide a segment into equal parts or in a given ratio, and explain why the method works.
A map of your school and the school itself, the plan of a building and the building: each pair is similar. This chapter of the Balbharati Mathematics Part II book shows how to construct triangles similar to a given one and how to construct tangents to circles. Every one of those constructions is built from a few basic ones learnt in earlier classes, so we revise them first. Use a sharp pencil, a ruler and a compass, and keep all construction arcs visible.
Five basic constructions
| Construction | Method in brief | Why it works |
|---|---|---|
| Perpendicular bisector of AB | Arcs of equal radius (more than half AB) from A and B on both sides; join their meeting points | Points equidistant from A and B lie on the perpendicular bisector |
| Line through P parallel to l | Draw any line through P meeting l; copy the angle it makes with l at P, in the corresponding position | Equal corresponding angles give parallel lines |
| Angle equal to a given angle | Arc from the vertex cuts both arms; same arc from the new vertex; copy the chord length | The two small triangles are congruent by SSS |
| Triangle with sides a, b, c | Draw one side; arcs of the other two lengths from its ends | The meeting point is at the right distance from both ends |
| Perpendicular to a line at a point on it | Equal arcs on both sides of the point, then the perpendicular bisector of that segment | Same as the perpendicular bisector |
Dividing a segment into equal parts
Dividing AB into n equal parts
- Draw a ray AX At an acute angle to AB.
- Mark n equal steps With one compass opening: A₁, A₂, ..., Aₙ on AX.
- Join Aₙ to B The last mark to the far end of the segment.
- Draw parallels Through A₁, A₂, ... parallel to AₙB; they cut AB into n equal parts.
Why it works: the parallel lines cut equal intercepts on AX, so by the property of parallel lines and transversals (Chapter 1) they cut equal intercepts on AB too. This is the basic proportionality theorem at work.
Worked example 1: a length the ruler cannot measure
You need a segment of length 10/3 cm. A ruler marks millimetres, and 10/3 = 3.333... cm cannot be measured exactly. Working: draw a segment of 10 cm and divide it into 3 equal parts by the method above; one part is exactly 10/3 cm. The book uses the same idea whenever a calculated side is awkward to measure.
Dividing a segment in a given ratio
To divide AB in the ratio m : n, mark m + n equal steps on the ray AX, join the last mark to B, and draw a parallel through the mth mark. It meets AB at the required point P with AP : PB = m : n.
Worked example 2: ratio 2 : 3
Divide a segment of 7.5 cm in the ratio 2 : 3. Working: mark 2 + 3 = 5 equal steps on AX, join the 5th mark to B, and draw a parallel through the 2nd mark. By calculation the parts should be 7.5 × 2/5 = 3 cm and 7.5 × 3/5 = 4.5 cm; measure to check your construction.
Every construction in this chapter rests on two ideas: parallel lines cut transversals proportionally, and copied angles (by SSS) are equal.
Key takeaways: practise the perpendicular bisector, parallel through a point, copying an angle and the triangle from three sides until they are quick and neat. To divide a segment equally or in a ratio, step off equal parts on a slanting ray and draw parallels. Always check a construction by measuring.
Check your understanding
-
1. To divide a segment AB in the ratio 3 : 4, how many equal steps are marked on the ray AX?
- 3
- 4
- 7
- 12
Show answer
Answer: C. The whole segment must be split into 3 + 4 = 7 equal parts, so 7 equal steps are marked; the parallel through the 3rd mark gives the ratio 3 : 4.
-
2. Why do the parallel lines in the 'equal parts' construction cut AB into equal parts?
- Because the compass opening was fixed on AB
- Because parallel lines cut proportional intercepts on any two transversals
- Because AX is perpendicular to AB
- Because all the triangles are congruent
Show answer
Answer: B. Equal intercepts on AX are cut by parallel lines, and parallel lines cut intercepts in the same ratio on every transversal, so the intercepts on AB are equal too.
-
3. A segment of 9 cm is divided in the ratio 4 : 5. What is the shorter part?
- 4 cm
- 4.5 cm
- 5 cm
- 3.6 cm
Show answer
Answer: A. There are 4 + 5 = 9 parts of 1 cm each. The shorter part is 4 parts = 4 cm and the longer is 5 cm.
-
4. When copying an angle with a compass, which congruence test justifies that the new angle equals the given one?
- SAS
- AA
- RHS
- SSS
Show answer
Answer: D. The construction makes two triangles with all three sides equal (two equal radii and the copied chord), so they are congruent by SSS and the angles are equal.
-
5. Which length is best obtained by dividing a segment into equal parts rather than measuring directly?
- 4.5 cm
- 6 cm
- 20/3 cm
- 7.2 cm
Show answer
Answer: C. 20/3 cm = 6.666... cm cannot be marked exactly on a ruler, but dividing a 20 cm segment into 3 equal parts gives it exactly. The others are exact millimetre lengths.
Sign in to keep track of the lessons you finish.