- Practice
- About 17 min
- 5 practice questions
Defects of vision and uses of lenses
Explain nearsightedness, farsightedness and presbyopia with their causes and corrections, and describe the uses of lenses in spectacles, the simple and compound microscope and the telescope.
If something looks wrong, please tell us.
By the end of this lesson you can
- Describe nearsightedness, farsightedness and presbyopia, their causes and how they are corrected.
- Work out the type and focal length of a corrective lens from its power.
- Describe uses of concave and convex lenses, including microscopes and telescopes.
Many people cannot see clearly because their eye lens cannot focus images exactly on the retina. These refraction defects are corrected with lenses of suitable power.
1. Nearsightedness (myopia)
Nearby objects are clear, but distant objects look blurred; the far point has moved closer than infinity. The image of a distant object forms in front of the retina. Causes: the curvature of the cornea and lens increases (the muscles cannot relax, so the converging power stays too large), or the eyeball is elongated, increasing the distance between lens and retina. Correction: a concave lens of suitable focal length. It diverges the rays a little, so the eye lens then focuses them on the retina. Its power is negative.
2. Farsightedness (hypermetropia)
Distant objects are clear, but nearby objects look blurred; the near point has moved farther than 25 cm. The image of a nearby object would form behind the retina. Causes: the curvature of the cornea and lens decreases, so the converging power is too small, or the eyeball is flattened (shorter), decreasing the distance between lens and retina. Correction: a convex lens of suitable focal length, which converges the rays before they reach the eye. Its power is positive.
3. Presbyopia
With age, the muscles near the eye lens gradually lose their ability to change its focal length, and the near point moves away. Older people therefore find it hard to see nearby objects clearly. People who have both near and far vision problems use bifocal lenses: the upper part is concave (for distant vision) and the lower part is convex (for reading).
Myopia versus hypermetropia
-
Nearsightedness (myopia)
- Cannot see distant objects clearly
- Image forms in front of the retina
- Lens too strongly curved or eyeball elongated
- Corrected by a concave lens (negative power)
-
Farsightedness (hypermetropia)
- Cannot see nearby objects clearly
- Image forms behind the retina
- Lens too weakly curved or eyeball shortened
- Corrected by a convex lens (positive power)
Worked example 1: reading a prescription
A prescription says −2.0 D. f = 1/P = 1/(−2) = −0.5 m = −50 cm. A negative power means a concave lens, used for nearsightedness. Another says +1.25 D: f = 1/1.25 = +0.8 m, a convex lens for farsightedness.
Uses of lenses
Where lenses are used
-
Concave lenses
- Spectacles for nearsightedness
- Door peephole, to see a wide area outside
- Torches, to spread light from a small bulb
- Instruments using laser light, such as scanners and CD players
- Inside or in front of eyepieces of cameras, telescopes and microscopes, to improve image quality
-
Convex lenses
- Spectacles for farsightedness
- Simple microscope (magnifying glass)
- Compound microscope
- Refracting telescope
- Camera, projector, spectrograph
Simple microscope
A convex lens of short focal length, with the object placed inside its focal length, forms a virtual, erect, enlarged image. Such a magnifying lens can make an object look about 20 times larger. Watch repairers and people testing gems for defects use it.
Compound microscope
Blood cells, plant and animal cells and bacteria are too small for a simple microscope. A compound microscope uses two convex lenses fixed in a metal tube along the same axis: an objective with a small aperture and short focal length, and an eyepiece with a larger aperture and longer focal length. The image formed by the objective acts as the object for the eyepiece, so the magnification happens in two stages, giving much higher magnification.
Telescope
A telescope shows distant objects clearly and magnified. Telescopes used for stars and planets are astronomical telescopes. A refracting telescope uses lenses; a reflecting telescope uses mirrors as well as lenses. The objective has a large diameter and long focal length, to collect as much light as possible from the distant object; the eyepiece is smaller with a short focal length. The image formed by the objective acts as the object for the eyepiece. Using different eyepieces with the same objective gives different magnifications.
Worked example 2: objective or eyepiece?
In a microscope, the lens nearer the object has the shorter focal length (the objective), because it must form a large first image of a tiny, nearby object. In a telescope, the objective has the longer focal length and larger diameter, because it must gather light from a very distant object. In both, the eyepiece magnifies the image made by the objective.
Key takeaways: myopia (image in front of retina) is corrected with a concave lens, hypermetropia (image behind retina) with a convex lens, presbyopia with reading glasses or bifocals. Concave lenses are used in peepholes and torches; convex lenses in magnifiers, microscopes, telescopes and cameras.
Check your understanding
-
1. A person can see nearby objects clearly but not distant ones. The defect and correction are:
- Farsightedness; convex lens
- Nearsightedness; concave lens
- Presbyopia; concave lens
- Nearsightedness; convex lens
Show answer
Answer: B. Inability to see distant objects is nearsightedness (myopia). The image forms in front of the retina, and a concave lens corrects it.
-
2. In farsightedness, the image of a nearby object forms:
- On the retina
- In front of the retina
- Behind the retina
- On the cornea
Show answer
Answer: C. The converging power is too small (or the eyeball too short), so rays from a nearby object would meet behind the retina.
-
3. A doctor prescribes a lens of power +2 D. What are its focal length and type?
- +0.5 m, convex
- −0.5 m, concave
- +2 m, convex
- +0.2 m, concave
Show answer
Answer: A. f = 1/P = 1/2 = 0.5 m. The positive sign means a convex lens, used to correct farsightedness.
-
4. Bifocal lenses have:
- Convex upper part and concave lower part
- Two convex parts
- Two concave parts
- Concave upper part for distant vision and convex lower part for reading
Show answer
Answer: D. The upper concave part corrects distant vision (nearsightedness) and the lower convex part helps with reading (farsightedness).
-
5. Why does the objective of an astronomical telescope have a large diameter?
- To make the telescope lighter
- To collect as much light as possible from distant objects
- To form a virtual image
- To reduce the magnification
Show answer
Answer: B. Distant stars and planets send very little light to us. A large objective gathers more of it, so faint objects can be seen.
Sign in to keep track of the lessons you finish.