- Practice
- About 16 min
- 5 practice questions
Chemical properties of carbon compounds
Describe combustion (clean blue and sooty yellow flames), oxidation by alkaline potassium permanganate, addition reactions including the iodine test and hydrogenation, and substitution by chlorine.
If something looks wrong, please tell us.
By the end of this lesson you can
- Write combustion equations and explain why some compounds burn with a sooty flame.
- Explain the oxidation of ethanol to ethanoic acid by alkaline potassium permanganate.
- Distinguish addition from substitution reactions and give examples of each.
Carbon compounds are used as fuels, foods and raw materials because of the reactions they undergo. This lesson covers four important types: combustion, oxidation, addition and substitution.
1. Combustion
Carbon and most carbon compounds burn in oxygen, giving out heat and light. Hydrocarbons and most carbon compounds form carbon dioxide and water. C + O₂ → CO₂ + heat + light; CH₄ + 2O₂ → CO₂ + 2H₂O + heat + light; CH₃-CH₂-OH + 3O₂ → 2CO₂ + 3H₂O + heat + light.
Worked example 1: burning propane (in LPG)
C₃H₈ + O₂ → CO₂ + H₂O. Carbon: 3, so 3CO₂. Hydrogen: 8, so 4H₂O. Oxygen on the right: 3 × 2 + 4 × 1 = 10 atoms, so 5O₂. Balanced: C₃H₈ + 5O₂ → 3CO₂ + 4H₂O + heat.
Clean flame or sooty flame?
-
Clean blue flame
- Saturated compounds such as ethanol
- Enough oxygen for complete burning
- No soot
-
Yellow, sooty flame
- Unsaturated compounds such as naphthalene (C₁₀H₈)
- Higher proportion of carbon, so some carbon stays unburnt
- Hot carbon particles glow yellow and form black soot
- Saturated fuels too, if air supply is limited
Gas and kerosene stoves have air inlets so that the fuel mixes with enough oxygen to give a clean blue flame. Black soot on the bottom of vessels means the inlets are choked and fuel is being wasted; they should be cleaned.
2. Oxidation
In combustion all the bonds break and the compound is completely oxidised. With an oxidising agent such as potassium permanganate or potassium dichromate, only the bonds near the functional group react. Warm ethanol with sodium carbonate solution and add dilute potassium permanganate drop by drop: the pink colour disappears at first, because the permanganate is used up in oxidising ethanol to ethanoic acid. When all the ethanol has been oxidised, extra permanganate is not used and the pink colour stays.
CH₃-CH₂-OH —alkaline KMnO₄ [O]→ CH₃-COOH. Ethanol is oxidised to ethanoic acid: the -CH₂-OH group gains oxygen and loses hydrogen.
3. Addition reactions
In an addition reaction a compound combines with another substance to give a product containing all the atoms of both reactants. Unsaturated compounds add atoms across their double or triple bond and become saturated. Addition of iodine or bromine happens instantly at room temperature and their colour disappears, so it is used as a test for a multiple bond. Vegetable oils decolourise iodine (they are unsaturated); vanaspati ghee does not (it is saturated).
Unsaturated compounds also add hydrogen in the presence of a nickel or platinum catalyst. This hydrogenation turns the unsaturated chains of vegetable oils into saturated chains, giving vanaspati ghee: -CH=CH- + H₂ → -CH₂-CH₂-.
4. Substitution reactions
C-C and C-H single bonds are strong, so saturated hydrocarbons are unreactive with most reagents. In sunlight, however, they react rapidly with chlorine. Chlorine atoms replace hydrogen atoms one by one. A reaction in which one atom or group in a molecule is replaced by another is a substitution reaction.
- CH₄ + Cl₂ → CH₃Cl + HCl (in sunlight)
- CH₃Cl + Cl₂ → CH₂Cl₂ + HCl
- CH₂Cl₂ + Cl₂ → CHCl₃ + HCl
- CHCl₃ + Cl₂ → CCl₄ + HCl
Worked example 2: addition or substitution?
- CH₂=CH₂ + Br₂ → CH₂Br-CH₂Br: all atoms of both reactants end up in one product and the double bond becomes single: addition.
- C₂H₆ + Cl₂ → C₂H₅Cl + HCl (sunlight): a hydrogen is replaced by chlorine and HCl is a second product: substitution.
- Chlorinating propane can replace a hydrogen on an end carbon or on the middle carbon, giving two isomers: 1-chloropropane (CH₃-CH₂-CH₂-Cl) and 2-chloropropane (CH₃-CHCl-CH₃).
Key takeaways: carbon compounds burn to CO₂ and H₂O; unsaturated ones give a sooty yellow flame. Alkaline KMnO₄ oxidises ethanol to ethanoic acid. Unsaturated compounds undergo addition (decolourising iodine or bromine; hydrogenation with Ni or Pt). Saturated hydrocarbons undergo substitution with chlorine in sunlight.
Check your understanding
-
1. Naphthalene burns with a yellow, sooty flame while ethanol burns with a blue flame. Why?
- Naphthalene contains oxygen
- Naphthalene is unsaturated and has a higher proportion of carbon, so some carbon remains unburnt
- Ethanol has more carbon
- Ethanol does not burn completely
Show answer
Answer: B. Unsaturated compounds such as naphthalene have a larger proportion of carbon. Some carbon stays unburnt; the hot particles glow yellow and form soot.
-
2. During the oxidation of ethanol, the pink colour of potassium permanganate first disappears and later stays. It stays because:
- All the ethanol has been oxidised and the extra permanganate is not used up
- Permanganate turns into ethanol
- The solution has cooled
- Ethanoic acid is pink
Show answer
Answer: A. Permanganate is used up while ethanol remains. Once all the ethanol is oxidised, any more permanganate added stays unreacted and its pink colour remains.
-
3. Which substance will decolourise iodine solution?
- Vanaspati ghee
- Methane
- A vegetable oil with C=C double bonds
- Ethane
Show answer
Answer: C. Iodine adds across C=C double bonds and its colour disappears. Unsaturated vegetable oils react; saturated vanaspati ghee and alkanes do not.
-
4. Which catalyst is used for the hydrogenation of vegetable oils?
- Manganese dioxide
- Iron
- Sulphuric acid
- Nickel
Show answer
Answer: D. Hydrogen adds to unsaturated oils in the presence of a nickel (or platinum) catalyst, forming saturated vanaspati ghee.
-
5. CH₄ + Cl₂ → CH₃Cl + HCl in sunlight is an example of:
- Addition
- Combustion
- Substitution
- Oxidation by KMnO₄
Show answer
Answer: C. A hydrogen atom of methane is replaced by a chlorine atom, so it is a substitution reaction.
Sign in to keep track of the lessons you finish.