• Practice
  • About 16 min
  • 5 practice questions

Rational numbers and their decimal forms

Recall the properties and order of rational numbers, predict whether a fraction gives a terminating or a recurring decimal, and convert a recurring decimal into p/q form.

If something looks wrong, please tell us.

By the end of this lesson you can

  • Recall N ⊆ W ⊆ I ⊆ Q ⊆ R and the properties of addition and multiplication of rational numbers.
  • Compare two rational numbers p/q and r/s by cross-multiplying.
  • Tell from the denominator whether a decimal terminates, and write a recurring decimal as p/q.

Every number you have used so far — counting numbers, integers, fractions — is a real number. This chapter sorts real numbers into rational and irrational and then teaches you to work with square roots called surds. We start with the rational numbers, because the way their decimals behave is the key to recognising numbers that are not rational.

The number sets and the properties of rational numbers

Recall N = {1, 2, 3, ...}, W = {0, 1, 2, ...}, I = {..., −2, −1, 0, 1, 2, ...} and Q = {p/q | p, q ∈ I, q ≠ 0}. Each set sits inside the next: N ⊆ W ⊆ I ⊆ Q ⊆ R. For rational numbers a, b and c, addition and multiplication obey the following properties.

Properties of rational numbers
PropertyAdditionMultiplication
Commutativea + b = b + aa × b = b × a
Associative(a + b) + c = a + (b + c)(a × b) × c = a × (b × c)
Identitya + 0 = aa × 1 = a
Inversea + (−a) = 0a × (1/a) = 1, when a ≠ 0

Comparing rational numbers

For p/q and r/s with q > 0 and s > 0, compare the cross products p × s and q × r. If p × s = q × r the numbers are equal; if p × s > q × r then p/q > r/s; if p × s < q × r then p/q < r/s. For example, to compare 5/8 and 7/11: 5 × 11 = 55 and 8 × 7 = 56. Since 55 < 56, 5/8 < 7/11.

Two kinds of decimal for a rational number

When you divide p by q, the decimal either stops (terminating, such as 3/8 = 0.375) or goes on with a block of digits repeating for ever (non-terminating recurring, such as 5/6 = 0.8333...). In writing, a bar is drawn over the repeating block for short: in 0.8333... the bar goes over the 3, and in 1.272727... it goes over the block 27.

Write the fraction in lowest terms. If the denominator's only prime factors are 2 and/or 5, the decimal terminates. If it has any other prime factor, the decimal is non-terminating recurring.

— Denominator test

Predicting the type of decimal

  1. Reduce p/q to lowest terms 6/15 becomes 2/5 first.
  2. Factorise the denominator 2/5: denominator 5.
  3. Only 2s and 5s? Yes: terminating (2/5 = 0.4).
  4. Any other prime? Then non-terminating recurring, e.g. 5/12 with 12 = 2² × 3.

Worked example 1: which terminate?

Classify 7/40, 5/12 and 21/60. Working: 40 = 2³ × 5, so 7/40 terminates: 7/40 = 0.175. 12 = 2² × 3 has a 3, so 5/12 = 0.41666... recurs. For 21/60, first reduce: 21/60 = 7/20, and 20 = 2² × 5, so it terminates: 7/20 = 0.35. Checking the denominator before reducing (60 has a 3) would have given the wrong answer.

From a recurring decimal to p/q

Let x be the decimal. Multiply by 10, 100 or 1000 according to whether 1, 2 or 3 digits repeat, so that the repeating tails line up. Subtracting removes the endless tail.

Worked example 2: one and two repeating digits

Write 0.444... as p/q. Let x = 0.444...; then 10x = 4.444.... Subtract: 9x = 4, so x = 4/9. Now write 0.636363... as p/q. Two digits repeat, so let x = 0.6363... and 100x = 63.6363.... Subtract: 99x = 63, so x = 63/99 = 7/11.

Worked example 3: three repeating digits

Write 3.142142142... as p/q. Three digits repeat, so let x = 3.142142... and 1000x = 3142.142142.... Subtract: 999x = 3139, so x = 3139/999. (3139 has digit sum 16, so it shares no factor 3 with 999 = 3³ × 37, and 3139 is not a multiple of 37, so this is already in lowest terms.)

Worked example 4: when the repeat starts later

Write 1.2333... (only 3 repeats) as p/q. Let x = 1.2333.... Then 10x = 12.333... and 100x = 123.333.... Subtract these two: 90x = 111, so x = 111/90 = 37/30. Check: 37 ÷ 30 = 1.2333....

Key takeaways: rational numbers obey the commutative, associative, identity and inverse properties; compare p/q and r/s by cross-multiplying. Every rational number has a terminating or a non-terminating recurring decimal; reduce first, then check the denominator for primes other than 2 and 5. To convert a recurring decimal, multiply by a power of 10 that lines up the repeating part and subtract.

Check your understanding

  1. 1. Which of these has a terminating decimal form?

    1. 5/12
    2. 9/14
    3. 11/6
    4. 13/40
    Show answer

    Answer: D. 40 = 2³ × 5 has only the primes 2 and 5, so 13/40 terminates: 13/40 = 0.325. The denominators 12, 14 and 6 contain the primes 3, 7 and 3.

  2. 2. What is 0.888... in p/q form?

    1. 8/10
    2. 8/9
    3. 88/100
    4. 8/99
    Show answer

    Answer: B. Let x = 0.888...; 10x = 8.888.... Subtracting, 9x = 8, so x = 8/9. 8/10 = 0.8 exactly, which does not recur.

  3. 3. What is 0.181818... in p/q form?

    1. 2/11
    2. 18/100
    3. 9/50
    4. 1/18
    Show answer

    Answer: A. Two digits repeat: x = 0.1818..., 100x = 18.1818.... Subtracting, 99x = 18, so x = 18/99 = 2/11. Check: 2 ÷ 11 = 0.1818....

  4. 4. Which statement is correct?

    1. 3/7 > 4/9
    2. 3/7 = 4/9
    3. 3/7 < 4/9
    4. They cannot be compared
    Show answer

    Answer: C. Cross-multiply: 3 × 9 = 27 and 7 × 4 = 28. Since 27 < 28, 3/7 < 4/9.

  5. 5. What is 2.4666... (only 6 repeating) in p/q form?

    1. 246/100
    2. 37/15
    3. 222/99
    4. 74/33
    Show answer

    Answer: B. Let x = 2.4666.... Then 10x = 24.666... and 100x = 246.666.... Subtracting, 90x = 222, so x = 222/90 = 37/15. Check: 37 ÷ 15 = 2.4666....

Privacy · Terms · Refunds · Delivery