Revision notes

Chapter 1 Basic Concepts in Geometry: Foundation

The key points, rules to remember, tables and diagrams from all 5 lessons, on one page for quick revision. To keep a copy, use your browser's Print and choose "Save as PDF".

Lesson 1

Point, line and plane: co-ordinates and distance on a number line

Distances on a number line with K = −4, L = 2, M = 7
PointsCo-ordinatesLarger − smallerDistance
L and M2 and 77 − 2d(L, M) = 5
K and L−4 and 22 − (−4) = 2 + 4d(K, L) = 6
K and M−4 and 77 − (−4) = 7 + 4d(K, M) = 11

Finding d(A, B) from co-ordinates

  1. Write both co-ordinates For example A is −9 and B is −2.
  2. Pick the larger one −2 is larger than −9 (it lies to the right).
  3. Subtract the smaller −2 − (−9) = −2 + 9.
  4. Read the distance d(A, B) = 7, a non-negative number.

d(A, B) = larger co-ordinate − smaller co-ordinate = l(AB). The distance between two distinct points is positive; the distance of a point from itself is 0.

Key takeaways: point, line and plane are undefined basic ideas; a line means a straight line. The number a point represents is its co-ordinate. Distance is found by subtracting the smaller co-ordinate from the larger, so it is never negative, and d(A, B) = d(B, A) = l(AB). On a number line there are two points at any given positive distance from a point: one on each side.

Read the full lesson

Lesson 2

Betweenness: which of three points lies between the other two

Deciding the middle point

  1. Write the three distances One for each pair of points.
  2. Find the largest distance Its two points are the possible end points.
  3. Add the other two distances Compare the sum with the largest.
  4. Equal: points are collinear The point not in the largest pair is in the middle.
  5. Not equal: not collinear The three points form a triangle.
Using the betweenness rule
Ifthen
P - Q - Rd(P, Q) + d(Q, R) = d(P, R)
P - Q - R, d(P, R) = 14, d(P, Q) = 5.5d(Q, R) = 14 − 5.5 = 8.5
Sum of two distances ≠ third for every choicePoints are not collinear

Q is between P and R (P - Q - R) exactly when d(P, Q) + d(Q, R) = d(P, R). The two end points always give the largest distance.

Key takeaways: of three distinct collinear points exactly one lies between the other two. To find it, check whether the largest distance equals the sum of the other two; the point left out of the largest pair is the middle one. If no such equality holds, the points are not collinear and form a triangle. When the order is unknown, work out every possible order.

Read the full lesson

Lesson 3

Segment, ray and line as sets of points; congruent segments and midpoint

Sets of points on a line through A and B

  • Segment AB
    • End points A and B
    • Has a length l(AB)
    • Seg AB = seg BA
  • Ray AB
    • Starting point A
    • Goes on through B endlessly
    • Ray AB ≠ ray BA
  • Line AB
    • Ray AB ∪ its opposite ray
    • Endless both ways
    • Contains seg AB and ray AB

Seg AB ≅ seg CD exactly when l(AB) = l(CD). A segment has exactly one midpoint. The distance of a point from a line is the length of the perpendicular segment from the point to the line.

Key takeaways: a segment has two end points, a ray has one starting point, a line has none. Line AB = ray AB ∪ opposite ray. Congruent segments have equal lengths, and congruence is reflexive, symmetric and transitive. The midpoint divides a segment into two congruent parts and is unique. The distance of a point from a line is measured along the perpendicular.

Read the full lesson

Lesson 4

Conditional statements and their converses

Making the converse

  1. Write in if-then form If P, then Q.
  2. Identify the two parts Antecedent P, consequent Q.
  3. Swap them If Q, then P.
  4. Test the new statement Look for a counter-example.

Statement and converse

  • Both true
    • If a quadrilateral is a rectangle, then it has four right angles.
    • Converse: if a quadrilateral has four right angles, then it is a rectangle.
    • Both are true.
  • Converse false
    • If a number is divisible by 6, then it is divisible by 3. (true)
    • Converse: if a number is divisible by 3, then it is divisible by 6.
    • False: 9 is divisible by 3 but not by 6.
Splitting statements into their two parts
Statement (if-then)AntecedentConsequent
If a number is even, then it is divisible by 2.a number is evenit is divisible by 2
If a triangle has a right angle, then its other two angles are complementary.a triangle has a right angleits other two angles are complementary
If the sum of the digits of a number is divisible by 9, then the number is divisible by 9.the digit sum is divisible by 9the number is divisible by 9

Conditional statement: If P, then Q. Antecedent = P (given part); consequent = Q (part to be proved). Converse: If Q, then P. A true statement does not guarantee a true converse.

Key takeaways: write a statement in if-then form to see what is given and what must be proved. The converse swaps the two parts. Some converses are true and some are false; one counter-example proves a statement false. Many geometry theorems come in pairs where a statement and its converse are both true.

Read the full lesson

Lesson 5

Postulates, theorems and proofs: direct and indirect proof

How geometry is built

  • Undefined terms
    • Point, line, plane
  • Postulates
    • Accepted without proof
    • Example: one line through two points
  • Theorems
    • Proved from postulates and earlier theorems
    • Each has Given, To prove, Proof

Steps of an indirect proof

  1. Assume the opposite Suppose the consequent is false.
  2. Reason step by step Use the assumption with known facts.
  3. Reach a contradiction Something clashes with the given part or a known property.
  4. Reject the assumption So the consequent must be true.

Postulate: accepted without proof. Theorem: proved logically. Direct proof: given → reasons → result. Indirect proof: assume the result is false → reach a contradiction → the result is true.

Key takeaways: geometry is built from undefined terms, postulates and theorems. Every proof starts from the Given part of a conditional statement and ends at the To prove part, with a reason for each step. A direct proof argues straight forward; an indirect proof assumes the opposite and reaches a contradiction.

Read the full lesson

Privacy · Terms · Refunds · Delivery