• Practice
  • About 15 min
  • 5 practice questions

Plotting points and finding their quadrant

Plot a point from its co-ordinates using lines parallel to the axes, and say in which quadrant or on which axis a point lies from the signs of its co-ordinates, without drawing.

If something looks wrong, please tell us.

By the end of this lesson you can

  • Plot a point (a, b) on graph paper.
  • Decide the quadrant of a point from the signs of its co-ordinates.
  • Recognise points that lie on an axis.
  • Name the figure formed by joining plotted points.

Reading co-ordinates goes from the point to the numbers. Plotting goes the other way: from the numbers to the point. With practice you can even tell where a point lies without drawing at all.

Steps for plotting a point

Suppose we have to plot P(3, −2).

  1. Draw the X-axis and the Y-axis on graph paper and mark the origin O. Choose a scale, for example 1 cm = 1 unit, and number both axes.
  2. Through the point 3 on the X-axis, draw a line parallel to the Y-axis.
  3. Through the point −2 on the Y-axis, draw a line parallel to the X-axis.
  4. The two lines meet at P(3, −2). Mark it with a dot and label it. (A quick method: from O move 3 units right, then 2 units down.)

Plotting (a, b)

  1. Draw and number the axes Choose a scale.
  2. Line through a on the X-axis Parallel to the Y-axis.
  3. Line through b on the Y-axis Parallel to the X-axis.
  4. Mark the meeting point Label it with its name.

Quadrant from the signs

Look only at the signs of x and y: (+, +) is quadrant I, (−, +) is quadrant II, (−, −) is quadrant III, (+, −) is quadrant IV. If x = 0 the point is on the Y-axis; if y = 0 it is on the X-axis.

Where does (x, y) lie?

  • x = 0
    • On the Y-axis
    • Origin if y = 0 too
  • y = 0
    • On the X-axis
  • x > 0
    • y > 0: quadrant I
    • y < 0: quadrant IV
  • x < 0
    • y > 0: quadrant II
    • y < 0: quadrant III

Worked example 1: without drawing

Deciding position from the signs
PointSignsPosition
A(6, 9)(+, +)Quadrant I
B(−4, 7)(−, +)Quadrant II
C(−2.5, −8)(−, −)Quadrant III
D(11, −3)(+, −)Quadrant IV
E(0, −5)x = 0Y-axis
F(−7, 0)y = 0X-axis

Worked example 2: a figure from points

Plot K(1, 1), L(5, 1), M(5, 4) and N(1, 4) and join them in order. KL and NM are horizontal and 4 units long; LM and KN are vertical and 3 units long; every corner is a right angle. So □KLMN is a rectangle with sides 4 and 3 units. (With sides 4 and 4 it would be a square.)

Worked example 3: which points are in one quadrant?

Of the points P(−2, 3), Q(4, −1), R(2, −6), S(−3, −3) and T(−5, 5), the ones in quadrant IV are those with x positive and y negative: Q and R. P and T are in quadrant II and S is in quadrant III.

(+, +) I, (−, +) II, (−, −) III, (+, −) IV. x = 0: Y-axis. y = 0: X-axis.

Key takeaways: to plot (a, b), draw a line through a on the X-axis parallel to the Y-axis and a line through b on the Y-axis parallel to the X-axis; they meet at the point. The signs of the co-ordinates tell the quadrant at once, and a zero co-ordinate puts the point on an axis. Joining plotted points in order lets you identify figures.

Check your understanding

  1. 1. In which quadrant is the point (−7, −12)?

    1. Quadrant II
    2. Quadrant IV
    3. Quadrant I
    4. Quadrant III
    Show answer

    Answer: D. Both co-ordinates are negative, (−, −), so the point is in quadrant III.

  2. 2. Where does the point (0, 3.5) lie?

    1. On the Y-axis
    2. On the X-axis
    3. In quadrant I
    4. At the origin
    Show answer

    Answer: A. Its x co-ordinate is 0, so it lies on the Y-axis, 3.5 units above the origin.

  3. 3. To plot (−4, 6), the line through −4 on the X-axis is drawn

    1. parallel to the X-axis
    2. parallel to the Y-axis
    3. through the origin
    4. at 45° to the axes
    Show answer

    Answer: B. Through the point on the X-axis we draw a line parallel to the Y-axis; through 6 on the Y-axis we draw a line parallel to the X-axis. They meet at (−4, 6).

  4. 4. Which point lies in quadrant IV?

    1. (−3, 8)
    2. (−5, −1)
    3. (9, −2)
    4. (0, −4)
    Show answer

    Answer: C. Quadrant IV needs x positive and y negative: (9, −2). The point (0, −4) is on the Y-axis.

  5. 5. The points (0, 0), (4, 0), (4, 4) and (0, 4) are joined in order. What figure is formed?

    1. A rectangle that is not a square
    2. A trapezium
    3. A rhombus that is not a square
    4. A square
    Show answer

    Answer: D. Each side is 4 units long, two sides lie along the axes and every corner is a right angle, so the figure is a square.

Privacy · Terms · Refunds · Delivery