• Practice
  • About 15 min
  • 5 practice questions

Recap: surface area and volume of a cuboid, a cube and a cylinder

Revise the formulas for the area of the vertical faces, total surface area and volume of a cuboid, a cube and a cylinder, and use them in both directions.

If something looks wrong, please tell us.

By the end of this lesson you can

  • Use the formulas for the vertical faces, total surface area and volume of a cuboid.
  • Use the formulas for a cube.
  • Use the curved surface area, total surface area and volume of a cylinder.
  • Work backwards from an area or volume to a missing length.

How much tin is needed to make a box, how much paint covers a water tank, how much water a pipe holds: these are questions about surface area (the area of the outer surfaces, in square units) and volume (the space inside, in cubic units). This chapter adds the cone and the sphere; first we revise three solids from earlier standards.

Cuboid (length l, breadth b, height h)

  • Area of the four vertical faces = 2(l + b) × h.
  • Total surface area (all six faces) = 2(lb + bh + lh).
  • Volume = l × b × h.

Cube (edge l)

  • Area of the four vertical faces = 4l².
  • Total surface area = 6l².
  • Volume = l³.

Cylinder (base radius r, height h)

  • Curved surface area = 2πrh.
  • Total surface area = 2πr(r + h) (curved surface plus two circular ends).
  • Volume = πr²h.

Solids revised in this lesson

  • Cuboid
    • Vertical faces 2(l + b)h
    • Total 2(lb + bh + lh)
    • Volume lbh
  • Cube
    • Vertical faces 4l²
    • Total 6l²
    • Volume l³
  • Cylinder
    • Curved 2πrh
    • Total 2πr(r + h)
    • Volume πr²h

Worked example 1: a cuboid box

A box is 15 cm long, 10 cm broad and 8 cm high. Vertical faces = 2(15 + 10) × 8 = 400 cm². Total surface area = 2(150 + 80 + 120) = 2 × 350 = 700 cm². Volume = 15 × 10 × 8 = 1200 cm³.

Worked example 2: a cube backwards

The total surface area of a cube is 486 cm². Then 6l² = 486, l² = 81 and l = 9 cm. Vertical faces = 4 × 81 = 324 cm² and volume = 9³ = 729 cm³.

Worked example 3: a cylinder (π = 22/7)

A cylinder has base radius 7 cm and height 10 cm. Curved surface area = 2 × 22/7 × 7 × 10 = 440 cm². Total surface area = 2 × 22/7 × 7 × (7 + 10) = 44 × 17 = 748 cm². Volume = 22/7 × 7 × 7 × 10 = 1540 cm³.

Worked example 4: finding a missing length

The volume of a cuboid is 36 m³, its breadth is 2.4 m and height 1.5 m. Length = 36 ÷ (2.4 × 1.5) = 36 ÷ 3.6 = 10 m.

Solving a mensuration problem

  1. Identify the solid Cuboid, cube, cylinder, cone or sphere.
  2. Decide: area or volume? Covering, painting, sheet: area. Filling, holding: volume.
  3. Write the formula Curved, total or vertical faces?
  4. Substitute and calculate Keep units: cm², cm³, m², m³.

Cuboid: 2(lb + bh + lh), lbh. Cube: 6l², l³. Cylinder: 2πrh, 2πr(r + h), πr²h.

Key takeaways: surface area is measured in square units and volume in cubic units. Read whether the question wants vertical faces, curved surface or total surface. Formulas can be used backwards to find a missing length. Use the value of π that the question gives (22/7 or 3.14).

Check your understanding

  1. 1. A cuboid is 12 cm × 8 cm × 5 cm. What is its total surface area?

    1. 480 cm²
    2. 200 cm²
    3. 392 cm²
    4. 196 cm²
    Show answer

    Answer: C. Total surface area = 2(12 × 8 + 8 × 5 + 12 × 5) = 2(96 + 40 + 60) = 2 × 196 = 392 cm².

  2. 2. What is the volume of a cube with edge 5.5 cm?

    1. 166.375 cm³
    2. 30.25 cm³
    3. 181.5 cm³
    4. 121 cm³
    Show answer

    Answer: A. Volume = l³ = 5.5 × 5.5 × 5.5 = 30.25 × 5.5 = 166.375 cm³.

  3. 3. The base radius of a cylinder is 14 cm and its height 5 cm. What is its curved surface area? (π = 22/7)

    1. 616 cm²
    2. 880 cm²
    3. 1672 cm²
    4. 440 cm²
    Show answer

    Answer: D. Curved surface area = 2πrh = 2 × 22/7 × 14 × 5 = 2 × 22 × 2 × 5 = 440 cm².

  4. 4. The total surface area of a cube is 216 cm². What is the area of its four vertical faces?

    1. 144 cm²
    2. 36 cm²
    3. 108 cm²
    4. 54 cm²
    Show answer

    Answer: A. 6l² = 216 gives l² = 36. Vertical faces = 4l² = 4 × 36 = 144 cm².

  5. 5. The curved surface area of a cylinder is 1320 cm² and its radius is 10.5 cm. What is its height? (π = 22/7)

    1. 40 cm
    2. 20 cm
    3. 10 cm
    4. 63 cm
    Show answer

    Answer: B. 2πrh = 1320, so 2 × 22/7 × 10.5 × h = 66h = 1320 and h = 20 cm.

Privacy · Terms · Refunds · Delivery