• Practice
  • About 16 min
  • 5 practice questions

Uniform motion, acceleration and motion graphs

Tell uniform from non-uniform motion, calculate positive, negative and zero acceleration, and read distance-time and velocity-time graphs, including finding distance from the area under a velocity-time graph.

If something looks wrong, please tell us.

By the end of this lesson you can

  • Tell uniform motion from non-uniform motion using a table of readings.
  • Calculate acceleration from a = (v − u)/t and say whether it is positive, negative or zero.
  • Explain what the slope of a distance-time graph and of a velocity-time graph tells you.
  • Find the distance travelled from the area under a velocity-time graph.

Knowing a speed at one moment is not enough to describe a whole journey. A car on an empty highway may cover the same distance every minute, while a car in city traffic keeps speeding up and slowing down. This lesson describes these patterns with words, formulas and graphs.

Uniform and non-uniform motion

If an object covers equal distances in equal intervals of time, however short the intervals, its motion is uniform (uniform speed). If it covers unequal distances in equal intervals of time, its motion is non-uniform. Most real journeys are non-uniform; uniform motion is a useful ideal.

Made-up readings for two cyclists
Time (min)02468
Cyclist A: distance (m)0600120018002400
Cyclist B: distance (m)0500130017002400

Cyclist A covers 600 m in every 2-minute interval, so A's motion is uniform at 300 m/min. Cyclist B covers 500 m, 800 m, 400 m and 700 m in the four intervals, so B's motion is non-uniform, even though both reach 2400 m at 8 minutes and have the same average speed.

Acceleration

Acceleration is the rate of change of velocity: acceleration = change in velocity ÷ time. If the initial velocity is u and it becomes v after time t, then a = (v − u)/t. The SI unit is m/s² and the CGS unit is cm/s². An object starting from rest has u = 0; an object that comes to rest has v = 0.

  • Positive acceleration: velocity increases; the acceleration is in the direction of motion.
  • Negative acceleration (deceleration or retardation): velocity decreases; the acceleration is opposite to the direction of motion.
  • Zero acceleration: velocity does not change (uniform motion in a straight line, or rest).

If velocity changes by equal amounts in equal intervals of time, the acceleration is uniform; a freely falling object is the classic example. If velocity changes by unequal amounts in equal intervals, the acceleration is non-uniform, as for a car in traffic.

Worked example 1: speeding up and slowing down

Question: (a) A scooter starts from rest and reaches 12 m/s in 4 s. (b) A train slows from 20 m/s to 8 m/s in 6 s. Find each acceleration.

Working: (a) a = (12 − 0)/4 = 3 m/s², positive. (b) a = (8 − 20)/6 = −12/6 = −2 m/s². The minus sign shows deceleration: the train loses 2 m/s of velocity every second.

Distance-time graphs

Plot time on the X-axis and distance on the Y-axis. For uniform motion the graph is a straight line, because distance increases by the same amount in each equal time interval. The slope (steepness) of this line equals the speed: a steeper line means a faster object. For non-uniform motion the graph is a curve, and distance is not directly proportional to time. A horizontal line means the object is at rest.

Velocity-time graphs

Plot time on the X-axis and velocity on the Y-axis. For uniform velocity the graph is a horizontal straight line, and the acceleration is zero. For uniform acceleration it is a straight sloping line, and the slope equals the acceleration. For non-uniform acceleration the graph can take any shape.

The most useful property: the area under a velocity-time graph between two times equals the distance travelled in that interval. For a horizontal line the area is a rectangle (velocity × time). For a sloping line it is a trapezium, which is the same as using the average velocity over the interval.

Reading the two graphs

  • Distance-time graph
    • Straight line: uniform motion
    • Curve: non-uniform motion
    • Horizontal line: at rest
    • Slope gives speed
  • Velocity-time graph
    • Horizontal line: uniform velocity
    • Straight sloping line: uniform acceleration
    • Slope gives acceleration
    • Area under it gives distance

Worked example 2: distance from areas

Question: (a) A car moves at a steady 15 m/s for 8 s. (b) Another car speeds up uniformly from 4 m/s to 16 m/s in 6 s. Use the velocity-time graph to find each distance.

Working: (a) The graph is a horizontal line at 15 m/s; the area is a rectangle: 15 × 8 = 120 m. (b) The graph is a straight line from 4 m/s to 16 m/s; the area is a trapezium: ½ × (4 + 16) × 6 = 60 m. Check with average velocity: (4 + 16)/2 = 10 m/s, and 10 m/s × 6 s = 60 m. The acceleration here is the slope: (16 − 4)/6 = 2 m/s².

a = (v − u)/t. Slope of a distance-time graph = speed; slope of a velocity-time graph = acceleration; area under a velocity-time graph = distance travelled.

Key takeaways: uniform motion means equal distances in equal time intervals and gives a straight distance-time graph. Acceleration is the rate of change of velocity and can be positive, negative or zero. On a velocity-time graph a straight sloping line means uniform acceleration, and the area underneath is the distance covered.

Check your understanding

  1. 1. An object is said to be in uniform motion when it

    1. covers equal distances in equal intervals of time
    2. moves only in a circle
    3. has a positive acceleration
    4. covers more distance in each later second
    Show answer

    Answer: A. Uniform motion is defined by equal distances in equal time intervals. Motion in a circle at constant speed changes direction, and an object with positive acceleration covers more distance each second, so neither is uniform motion in a straight line.

  2. 2. A cyclist's velocity drops from 10 m/s to 4 m/s in 3 s. What is the acceleration?

    1. 2 m/s²
    2. −2 m/s²
    3. −6 m/s²
    4. 4.7 m/s²
    Show answer

    Answer: B. a = (v − u)/t = (4 − 10)/3 = −6/3 = −2 m/s². It is negative because the velocity decreases, so this is a deceleration. Forgetting to divide by the time gives the wrong value −6.

  3. 3. What does the slope of a distance-time graph represent?

    1. Acceleration
    2. Distance
    3. Displacement
    4. Speed
    Show answer

    Answer: D. Slope = change in distance ÷ change in time, which is the definition of speed. The slope of a velocity-time graph, not a distance-time graph, gives acceleration.

  4. 4. A distance-time graph is a straight horizontal line. What can you say about the object?

    1. It is moving with uniform speed
    2. It is at rest
    3. It is accelerating uniformly
    4. It is moving in a circle
    Show answer

    Answer: B. A horizontal line means the distance does not change as time passes, so the object is not moving: it is at rest. Uniform speed would give a straight sloping line.

  5. 5. A velocity-time graph is a straight line rising from 0 m/s at t = 0 to 20 m/s at t = 10 s. How far does the object travel in these 10 s?

    1. 200 m
    2. 20 m
    3. 100 m
    4. 50 m
    Show answer

    Answer: C. Distance = area under the graph = area of a triangle = ½ × base × height = ½ × 10 s × 20 m/s = 100 m. Multiplying 20 by 10 without the half counts a whole rectangle and gives the wrong 200.

Privacy · Terms · Refunds · Delivery