• Practice
  • About 16 min
  • 5 practice questions

Baking soda, washing soda, bleaching powder and crystalline salts

Describe the preparation, properties and uses of baking soda, washing soda and bleaching powder, explain softening of hard water and the action of soap, and work with water of crystallisation.

If something looks wrong, please tell us.

By the end of this lesson you can

  • Give the formula, nature and uses of baking soda, washing soda and bleaching powder.
  • Explain how washing soda softens hard water and why soap does not lather in hard water.
  • Name salts with water of crystallisation and give their formulae.
  • Calculate the percentage of water of crystallisation in a salt.

A pinch of baking soda makes dhokla spongy, washing soda helps soap work in well water, and bleaching powder keeps a swimming pool free of germs. Each of these everyday salts works because of a particular chemical property.

Baking soda: sodium hydrogen carbonate, NaHCO₃

  • A white powder; its chemical name is sodium bicarbonate (sodium hydrogen carbonate).
  • Basic: it turns moist red litmus blue, so it is used to reduce acidity in the stomach.
  • On heating, or with an acid, it releases carbon dioxide: 2NaHCO₃ → Na₂CO₃ + H₂O + CO₂. The gas bubbles make cakes, bread and dhokla soft and porous and bhaji crisp.
  • Used to produce CO₂ in fire extinguishers and to clean ovens.
  • Baking powder is baking soda mixed with a mild edible acid, so it releases CO₂ when moistened.

Washing soda: sodium carbonate

Crystals of sodium carbonate, Na₂CO₃·10H₂O, lose most of their water of crystallisation when kept in air and turn into a white powder, Na₂CO₃·H₂O, which the Balbharati book calls washing soda. It is whitish and odourless, its solution turns litmus blue (basic), and it is hygroscopic. It is used for washing clothes, in the glass and paper industries and in refining petroleum. It reacts with acids to release CO₂: Na₂CO₃ + H₂SO₄ → Na₂SO₄ + H₂O + CO₂.

Softening hard water: water from wells and bore-wells is often hard because it contains chlorides and sulphates of calcium and magnesium. Washing soda turns these into insoluble carbonates that settle out: MgCl₂ + Na₂CO₃ → MgCO₃ + 2NaCl and CaCl₂ + Na₂CO₃ → CaCO₃ + 2NaCl. The water becomes soft and lathers well with soap.

Soap and hard water: soap is made by boiling oil or animal fat with sodium or potassium hydroxide; soap is the sodium or potassium salt of fatty acids. Bathing soaps use high-grade oils and fats; washing soaps use lower-grade ones. In hard water, calcium and magnesium ions form insoluble salts of the fatty acids, which appear as a scum (precipitate), so lather does not form and soap is wasted.

Bleaching powder: calcium oxychloride, CaOCl₂

Chlorine is a strong oxidising agent that kills microbes and bleaches colours, but it is a gas and hard to handle. Bleaching powder is a convenient solid that releases chlorine. It is made by passing chlorine over slaked lime: Ca(OH)₂ + Cl₂ → CaOCl₂ + H₂O. It is a yellowish-white solid with a strong smell of chlorine, because it slowly reacts with carbon dioxide in air: CaOCl₂ + CO₂ → CaCO₃ + Cl₂. With dilute acids it releases chlorine quickly: CaOCl₂ + H₂SO₄ → CaSO₄ + Cl₂ + H₂O. It is used to disinfect drinking water at waterworks and in swimming pools, to bleach cloth, and to disinfect roadsides and garbage sites.

Salts with water of crystallisation

Some crystalline salts
Common nameFormulaA use
Potash alumK₂SO₄·Al₂(SO₄)₃·24H₂OPurifying water: makes suspended particles clump and settle (coagulation)
BoraxNa₂B₄O₇·10H₂OCleaning agents and laboratory work
Epsom saltMgSO₄·7H₂OMedicinal and agricultural uses
Glauber's saltNa₂SO₄·10H₂OIndustrial uses
Barium chlorideBaCl₂·2H₂OLaboratory reagent
Blue vitriolCuSO₄·5H₂OIn a blood test for anaemia; with slaked lime in Bordeaux mixture, a fungicide for grapes and melons

Worked example 1: percentage of water in blue vitriol

Question: Find the percentage of water of crystallisation in CuSO₄·5H₂O. (Cu = 63.5, S = 32, O = 16, H = 1)

Working: CuSO₄ = 63.5 + 32 + 4 × 16 = 159.5. 5H₂O = 5 × 18 = 90. Formula mass = 159.5 + 90 = 249.5. Percentage of water = 90 ÷ 249.5 × 100 ≈ 36.1%.

Worked example 2: gas from baking soda

Question: How much carbon dioxide is released when 8.4 g of baking soda is heated completely? (Na = 23, C = 12, O = 16, H = 1)

Working: 2NaHCO₃ → Na₂CO₃ + H₂O + CO₂. NaHCO₃ = 23 + 1 + 12 + 48 = 84, so 2NaHCO₃ = 168 g gives 44 g CO₂. 8.4 g is 168 ÷ 20, so CO₂ = 44 ÷ 20 = 2.2 g.

Baking soda NaHCO₃ (basic, gives CO₂); washing soda Na₂CO₃ (softens hard water); bleaching powder CaOCl₂ (releases chlorine).

Key takeaways: baking soda releases CO₂ and neutralises acidity; washing soda removes hardness by precipitating calcium and magnesium carbonates; bleaching powder releases chlorine to disinfect and bleach. Many salts hold water of crystallisation in fixed proportions.

Check your understanding

  1. 1. What is the chemical formula of bleaching powder?

    1. NaHCO₃
    2. Na₂CO₃
    3. CaOCl₂
    4. CaCO₃
    Show answer

    Answer: C. Bleaching powder is calcium oxychloride, CaOCl₂, made from slaked lime and chlorine.

  2. 2. Why does baking soda make a cake soft and porous?

    1. It releases carbon dioxide gas, which forms bubbles in the batter
    2. It adds water to the cake
    3. It is acidic
    4. It melts the flour
    Show answer

    Answer: A. On heating (or with acid) NaHCO₃ gives CO₂. The gas bubbles expand in the batter and leave it spongy.

  3. 3. How does washing soda soften hard water?

    1. It dissolves calcium and magnesium as soap
    2. It boils the water
    3. It adds chlorine
    4. It converts calcium and magnesium salts into insoluble carbonates that settle out
    Show answer

    Answer: D. For example, MgCl₂ + Na₂CO₃ → MgCO₃ + 2NaCl. The insoluble carbonates are removed, so the water becomes soft.

  4. 4. Why does bleaching powder smell of chlorine?

    1. It contains liquid chlorine
    2. It reacts slowly with carbon dioxide in air and releases chlorine
    3. It is made from chlorine and water
    4. It contains sodium chloride
    Show answer

    Answer: B. CaOCl₂ + CO₂ → CaCO₃ + Cl₂. The chlorine slowly released gives the smell and the disinfecting action.

  5. 5. What is the percentage of water of crystallisation in Na₂CO₃·10H₂O? (Na = 23, C = 12, O = 16, H = 1)

    1. About 37.1%
    2. About 62.9%
    3. About 18%
    4. About 10%
    Show answer

    Answer: B. Na₂CO₃ = 46 + 12 + 48 = 106; 10H₂O = 180; total 286. Water % = 180 ÷ 286 × 100 ≈ 62.9%.

Privacy · Terms · Refunds · Delivery