Revision notes

Chapter 2 Work and Energy: Foundation

The key points, rules to remember, tables and diagrams from all 5 lessons, on one page for quick revision. To keep a copy, use your browser's Print and choose "Save as PDF".

Lesson 1

Work done by a force: W = Fs cos θ, the joule and the erg

Finding work when the force is at an angle

  1. Draw force and displacement Mark the angle θ between them.
  2. Find the useful part of the force Component along the displacement: F cos θ.
  3. Multiply by the displacement W = F s cos θ.
  4. Write the unit Newton × metre = joule.
Angle θcos θWork W = Fs cos θ
0°1W = Fs (largest possible)
60°1/2W = Fs/2
90°0W = 0
180°−1W = −Fs

Work = force × displacement along the force: W = F s cos θ. Unit: joule (SI) and erg (CGS); 1 J = 10⁷ erg.

Key takeaways: work needs both a force and a displacement. When the force is at an angle θ to the motion, only F cos θ does work, so W = Fs cos θ. Work is greatest at θ = 0° and zero at θ = 90°. One joule is one newton acting through one metre, and it equals ten million ergs.

Read the full lesson

Lesson 2

Positive, negative and zero work

Sign of the work done by a force

  • Positive work θ = 0°
    • Force along the motion
    • Pushing a cart forward
    • Gravity on a falling object
  • Negative work θ = 180°
    • Force against the motion
    • Friction on a sliding box
    • Brakes on a moving car
  • Zero work θ = 90° or s = 0
    • Force sideways to the motion
    • Gravity on a satellite in a circular orbit
    • Pushing a fixed wall

Same direction (θ = 0°): positive work. Opposite (θ = 180°): negative work. Perpendicular (θ = 90°) or no displacement: zero work.

Key takeaways: the sign of the work depends on the angle between force and displacement. Lifting means you do +mgh and gravity does −mgh. Friction and braking forces do negative work. A force at right angles to the motion, like gravity on a satellite in a circular orbit, does no work at all.

Read the full lesson

Lesson 3

Energy and kinetic energy: KE = ½mv²

Forms of energy

  • Mechanical energy
    • Kinetic: due to motion
    • Potential: due to position or state
  • Heat and light
    • From a stove, the sun, a bulb
  • Sound
    • Vibrations that can rattle windows
  • Electrical and magnetic
    • Runs fans, motors, electromagnets
  • Chemical
    • Stored in food, fuel and cells
  • Nuclear
    • Released from atomic nuclei

Energy is the capacity to do work. Kinetic energy K.E. = ½mv²; the work done on an object equals its change in kinetic energy.

Key takeaways: energy is measured in joules, like work. Kinetic energy is energy of motion and equals ½mv². It is proportional to mass and to the square of speed, so speed matters much more. The work done on an object equals the change in its kinetic energy.

Read the full lesson

Lesson 4

Potential energy and the conservation of energy

Energy can neither be created nor destroyed; it can only be changed from one form to another. The total energy of the universe stays constant.

Device or eventEnergy inMain energy out
Electric fan or motorElectricalMechanical
GeneratorMechanicalElectrical
Electric heaterElectricalHeat
Electric lampElectricalLight (and heat)
LoudspeakerElectricalSound
MicrophoneSoundElectrical
Solar cellLightElectrical
Dry cell or batteryChemicalElectrical
FirecrackerChemicalLight, sound and heat

Energy changes in a free fall

  1. At the top All potential: P.E. = mgh, K.E. = 0
  2. Part way down P.E. falls, K.E. rises; the sum is still mgh
  3. Just above the ground All kinetic: K.E. = mgh, P.E. = 0

Key takeaways: potential energy is stored energy of position or state; for height, P.E. = mgh measured from a chosen level. Energy is never created or destroyed, only changed in form. In free fall potential energy turns into kinetic energy while the total stays mgh.

Read the full lesson

Lesson 5

Power: the watt, horsepower and the kilowatt hour

Work and power

  • Work
    • Force × displacement
    • Does not depend on time taken
    • Unit: joule
    • Lifting 50 kg up 3 m is the same work, slow or fast
  • Power
    • Work ÷ time
    • Depends on how quickly the work is done
    • Unit: watt (J/s)
    • Doing the same lift faster needs more power

Power = work ÷ time (P = W/t). 1 W = 1 J/s; 1 hp = 746 W; 1 kW h = 1 unit = 3.6 × 10⁶ J (a unit of energy).

Key takeaways: power tells how fast work is done or energy is used. The same work done in less time needs more power. Electrical energy at home is measured in kilowatt hours, found by multiplying power in kilowatts by time in hours.

Read the full lesson

Privacy · Terms · Refunds · Delivery