- Practice
- About 15 min
- 5 practice questions
Work done by a force: W = Fs cos θ, the joule and the erg
Explain when work is done in physics, calculate work when the force is along the displacement or at an angle to it, and convert between joules and ergs.
If something looks wrong, please tell us.
By the end of this lesson you can
- Say when a force does work in the scientific sense.
- Calculate work with W = Fs when force and displacement are in the same direction.
- Use W = Fs cos θ when the force acts at an angle θ to the displacement.
- Define the joule and the erg and show that 1 J = 10⁷ erg.
In daily speech, reading a chapter or solving sums is called work. In physics the word has a narrower meaning. A student holding a heavy bag still for ten minutes gets tired, yet in physics no work is done on the bag, because it does not move. This lesson builds the exact meaning of work used in the Maharashtra State Board Std 9 Science and Technology book.
When is work done?
Work is done when a force applied on an object causes a displacement of the object. Two things are needed: a force, and a displacement with some part of it along the force. If either is missing, the work done by that force is zero. When force and displacement are in the same direction, work = force × displacement, or W = Fs.
Worked example 1: pushing a box
Question: Meena pushes a carton across the floor with a steady horizontal force of 40 N and moves it 5 m in the direction of the push. How much work does she do on it?
Working: Force and displacement are in the same direction, so W = F × s = 40 N × 5 m = 200 J.
Force at an angle to the displacement
Often the force and the displacement point in different directions. A child pulls a toy cart with a string held at an angle to the ground; the cart moves along the ground. Only the part (component) of the force along the ground moves the cart forward. The rest of the force pulls upwards and does not help with the horizontal displacement.
If the string makes an angle θ with the horizontal and the pull is F, the horizontal component is F₁ = F cos θ (from cos θ = base ÷ hypotenuse in the right triangle of forces). The work done is therefore W = F₁ × s = F s cos θ.
Finding work when the force is at an angle
- Draw force and displacement Mark the angle θ between them.
- Find the useful part of the force Component along the displacement: F cos θ.
- Multiply by the displacement W = F s cos θ.
- Write the unit Newton × metre = joule.
| Angle θ | cos θ | Work W = Fs cos θ |
|---|---|---|
| 0° | 1 | W = Fs (largest possible) |
| 60° | 1/2 | W = Fs/2 |
| 90° | 0 | W = 0 |
| 180° | −1 | W = −Fs |
Worked example 2: pulling a toy cart
Question: Arjun pulls a toy cart with a force of 20 N through a string that makes 60° with the floor. The cart moves 3 m along the floor. Find the work done. (cos 60° = 1/2)
Working: W = F s cos θ = 20 × 3 × 1/2 = 30 J. If he had pulled horizontally with the same 20 N, the work would have been 20 × 3 = 60 J, so pulling at 60° uses only half the force for moving the cart forward.
Units of work: joule and erg
Since work = force × displacement, the SI unit is newton × metre, called the joule (J). 1 joule is the work done when a force of 1 newton displaces an object through 1 metre in the direction of the force. In the CGS system the unit is dyne × centimetre, called the erg. 1 erg is the work done when a force of 1 dyne displaces an object through 1 cm in the direction of the force.
To relate them, use 1 N = 10⁵ dyne and 1 m = 10² cm: 1 J = 1 N × 1 m = 10⁵ dyne × 10² cm = 10⁷ dyne cm, so 1 J = 10⁷ erg.
Worked example 3: converting units
Question: Express 5 J in ergs, and 2 × 10⁸ erg in joules. Working: 5 J = 5 × 10⁷ erg. 2 × 10⁸ erg = 2 × 10⁸ ÷ 10⁷ J = 20 J.
Work = force × displacement along the force: W = F s cos θ. Unit: joule (SI) and erg (CGS); 1 J = 10⁷ erg.
Key takeaways: work needs both a force and a displacement. When the force is at an angle θ to the motion, only F cos θ does work, so W = Fs cos θ. Work is greatest at θ = 0° and zero at θ = 90°. One joule is one newton acting through one metre, and it equals ten million ergs.
Check your understanding
-
1. What is the SI unit of work?
- Newton
- Joule
- Watt
- Erg
Show answer
Answer: B. Work = force × displacement, so its SI unit is newton × metre, which is named the joule. The erg is the CGS unit, the newton is a unit of force and the watt is a unit of power.
-
2. A force of 50 N moves a crate 4 m in the direction of the force. How much work is done?
- 12.5 J
- 200 J
- 54 J
- 46 J
Show answer
Answer: B. Force and displacement are in the same direction, so W = F × s = 50 N × 4 m = 200 J. Dividing, adding or subtracting the numbers gives the wrong options.
-
3. How many ergs make one joule?
- 10⁵ erg
- 10² erg
- 10⁷ erg
- 10³ erg
Show answer
Answer: C. 1 J = 1 N × 1 m. With 1 N = 10⁵ dyne and 1 m = 10² cm, 1 J = 10⁵ × 10² dyne cm = 10⁷ erg.
-
4. A trolley is pulled with a force of 10 N along a rope at 60° to the horizontal and moves 6 m along the floor. How much work is done? (cos 60° = 1/2)
- 60 J
- 0 J
- 120 J
- 30 J
Show answer
Answer: D. W = F s cos θ = 10 × 6 × 1/2 = 30 J. Using W = Fs without the cos 60° factor wrongly gives 60 J.
-
5. For a fixed force and displacement, the work done is greatest when the angle between them is
- 0°
- 45°
- 90°
- 180°
Show answer
Answer: A. W = Fs cos θ and cos θ is largest (equal to 1) at θ = 0°, when the force is exactly along the displacement. At 90° the work is zero and at 180° it is negative.
Sign in to keep track of the lessons you finish.