- Practice
- About 16 min
- 5 practice questions
Radicals and writing chemical formulae
Classify radicals as basic or acidic and as simple or composite, and write correct chemical formulae of ionic compounds by the cross-multiplication of valencies.
If something looks wrong, please tell us.
By the end of this lesson you can
- Explain what radicals are and why they are called basic or acidic.
- Tell simple radicals from composite radicals.
- Use the cross-multiplication method to write chemical formulae.
- Calculate molecular masses from the formulae you write.
Sodium hydroxide, potassium hydroxide and calcium hydroxide all contain the same OH⁻ group; hydrochloric acid, hydrobromic acid and nitric acid all contain H⁺. Looking at compounds as pairs of charged parts makes it easy to write formulae for hundreds of compounds from a short list.
Radicals
A compound with ionic bonds has two parts: cations (positive ions) and anions (negative ions). Because these take part in chemical reactions as independent units, they are called radicals. The magnitude of the charge on a radical is its valency.
- Basic radicals are cations. Different bases such as NaOH and KOH differ only in their cation, so cations are called basic radicals. Most are formed when metal atoms lose electrons (Na⁺, Cu²⁺); the ammonium ion NH₄⁺ is an exception.
- Acidic radicals are anions. Different acids such as HCl and HBr differ only in their anion, so anions are called acidic radicals. Most are formed when non-metal atoms gain electrons (Cl⁻, S²⁻); the permanganate ion MnO₄⁻ is an exception.
Radicals can also be sorted by size. A simple radical is a single charged atom (Na⁺, Cu⁺, Cl⁻, O²⁻). A composite radical is a group of atoms carrying a charge (SO₄²⁻, NO₃⁻, NH₄⁺, PO₄³⁻).
Classifying radicals
-
By charge
- Basic radicals: cations, e.g. Na⁺, Ca²⁺, Al³⁺, NH₄⁺
- Acidic radicals: anions, e.g. Cl⁻, O²⁻, SO₄²⁻, NO₃⁻
-
By composition
- Simple: one atom, e.g. K⁺, Fe³⁺, Br⁻, S²⁻
- Composite: a group of atoms, e.g. CO₃²⁻, OH⁻, NH₄⁺, MnO₄⁻
| Valency | Basic radicals | Acidic radicals |
|---|---|---|
| 1 | H⁺, Na⁺, K⁺, Ag⁺, Cu⁺ (cuprous), Hg⁺ (mercurous), NH₄⁺ (ammonium) | Cl⁻, Br⁻, I⁻, F⁻, OH⁻ (hydroxide), NO₃⁻ (nitrate), NO₂⁻ (nitrite), HCO₃⁻ (bicarbonate), HSO₄⁻ (bisulphate), MnO₄⁻ (permanganate), ClO₃⁻ (chlorate) |
| 2 | Mg²⁺, Ca²⁺, Cu²⁺ (cupric), Fe²⁺ (ferrous), Zn²⁺, Ni²⁺, Hg²⁺ (mercuric) | O²⁻ (oxide), S²⁻ (sulphide), SO₄²⁻ (sulphate), SO₃²⁻ (sulphite), CO₃²⁻ (carbonate), CrO₄²⁻ (chromate), Cr₂O₇²⁻ (dichromate) |
| 3 | Al³⁺, Fe³⁺ (ferric), Cr³⁺, Au³⁺ | N³⁻ (nitride), PO₄³⁻ (phosphate) |
Writing formulae by cross-multiplication
The name of an ionic compound has two words: the cation first, then the anion (sodium sulphate, calcium carbonate). The formula is written the same way, with the basic radical on the left. Charges are not shown in the final formula; instead the number of each radical is written as a subscript.
Steps to write a chemical formula
- Write the symbols Basic radical on the left, acidic radical on the right.
- Write each valency below its radical For example Al 3 and SO₄ 2.
- Cross over the numbers Each valency becomes the subscript of the other radical.
- Write the formula Put a composite radical in brackets if its number is more than 1; drop a subscript of 1; simplify a common factor.
Worked example 1: aluminium sulphate
Working: Al (valency 3) and SO₄ (valency 2). Crossing over gives Al₂ and (SO₄)₃, so the formula is Al₂(SO₄)₃. Check the charges: 2 × (+3) = +6 and 3 × (−2) = −6, which balance.
Worked example 2: three more formulae
Calcium phosphate: Ca (2), PO₄ (3) gives Ca₃(PO₄)₂. Ammonium chloride: NH₄ (1), Cl (1) gives NH₄Cl; no brackets are needed when the subscript is 1. Magnesium oxide: Mg (2), O (2) gives Mg₂O₂, which simplifies to MgO.
Worked example 3: molecular mass from the formula
Question: Find the molecular mass of aluminium sulphate. (Al = 27, S = 32, O = 16) Working: Al₂(SO₄)₃ has 2 Al, 3 S and 12 O. Mass = (2 × 27) + (3 × 32) + (12 × 16) = 54 + 96 + 192 = 342 u.
Basic radical on the left, acidic radical on the right; cross over the valencies as subscripts; use brackets for a composite radical taken more than once.
Key takeaways: radicals are the charged parts of ionic compounds; cations are basic radicals and anions are acidic radicals. Simple radicals are single atoms, composite radicals are charged groups. Cross-multiplying valencies gives formulae that always balance the positive and negative charges.
Check your understanding
-
1. Which of these is a composite radical?
- Cl⁻
- Na⁺
- SO₄²⁻
- O²⁻
Show answer
Answer: C. A composite radical is a group of atoms carrying a charge. SO₄²⁻ contains one sulphur and four oxygen atoms. Cl⁻, Na⁺ and O²⁻ are single charged atoms, so they are simple radicals.
-
2. Which of these is a basic radical?
- Cl⁻
- NO₃⁻
- S²⁻
- Ca²⁺
Show answer
Answer: D. Basic radicals are cations (positive ions). Ca²⁺ is a cation formed from the metal calcium. The others are anions, which are acidic radicals.
-
3. What is the formula of calcium nitrate?
- CaNO₃
- Ca(NO₃)₂
- Ca₂NO₃
- Ca₂(NO₃)₃
Show answer
Answer: B. Ca has valency 2 and NO₃ has valency 1. Crossing over gives Ca₁(NO₃)₂, written Ca(NO₃)₂; the bracket shows that the whole nitrate group is taken twice.
-
4. What is the formula of aluminium oxide?
- Al₂O₃
- AlO
- Al₃O₂
- AlO₃
Show answer
Answer: A. Al has valency 3 and O has valency 2. Crossing over gives Al₂O₃. Check: 2 × (+3) = +6 and 3 × (−2) = −6.
-
5. What is the molecular mass of potassium carbonate, K₂CO₃? (K = 39, C = 12, O = 16)
- 67 u
- 138 u
- 99 u
- 106 u
Show answer
Answer: B. K₂CO₃ = (2 × 39) + 12 + (3 × 16) = 78 + 12 + 48 = 138 u.
Sign in to keep track of the lessons you finish.