• Foundation
  • About 14 min
  • 5 practice questions

The land of Maharashtra: the Konkan, the Sahyadri and the Deccan plateau

Learn the three physical divisions of Maharashtra, the hill ranges and passes of the Sahyadri, the highest peak Kalsubai, the lava-built Deccan plateau and the Lonar crater.

If something looks wrong, please tell us.

Maharashtra's land can be described in three bands from west to east: a narrow coastal plain, a wall of hills, and a wide plateau. Almost everything else about the state - its rain, rivers, soils and crops - follows from these three bands. This lesson explains each of them.

  • By the end of this lesson you can describe the three physical divisions of Maharashtra.
  • By the end of this lesson you can name the highest peak, important passes and hill stations of the Sahyadri.
  • By the end of this lesson you can explain how the Deccan plateau and the Lonar crater were formed.

The Konkan coastal plain

The Konkan is a narrow strip of land between the Arabian Sea and the Sahyadri. It is cut by many short rivers and creeks, has rocky headlands and sandy beaches, and has many sea forts. It is a land of heavy rain, rice fields, coconut and mango orchards, and fishing villages.

The Sahyadri (Western Ghats)

The Sahyadri rise steeply from the Konkan like a wall and slope gently towards the east. The highest peak of Maharashtra is Kalsubai, at about 1,646 metres. Roads and railways cross the Sahyadri through mountain passes called ghats: the Thal ghat (Kasara) on the Mumbai-Nashik route and the Bhor ghat (Khandala) on the Mumbai-Pune route are the best known. Popular hill stations include Mahabaleshwar and Panchgani (Satara), Matheran (Raigad), where motor vehicles are not allowed, and Lonavala-Khandala (Pune). The Western Ghats are a UNESCO World Heritage Site, and the flower-covered Kaas plateau in Satara district is part of it.

The Deccan plateau

Most of Maharashtra is the Deccan plateau. Millions of years ago, huge flows of lava spread over this region and cooled into layer upon layer of dark rock called basalt. These layers are called the Deccan Traps ('trap' comes from a word for steps, because the layers form step-like hills). Weathering of basalt produced the black soil of the plateau. Low ranges rise from the plateau, such as the Ajanta (Satmala) hills, the Harishchandra-Balaghat range and the Mahadeo hills.

In the far north, the Satpura range forms the border with Madhya Pradesh. Its hill stations include Toranmal (Nandurbar) and Chikhaldara (Amravati), in the Gawilgarh hills of the Melghat area.

Lonar: a crater in basalt

Lonar lake in Buldhana district lies in a crater formed when a meteorite struck the basalt plateau long ago. Its water is salty and alkaline. It is a Ramsar site (a wetland of international importance).

Physical divisions of Maharashtra
DivisionWhereMain features
KonkanCoast, west of the SahyadriNarrow plain, creeks, beaches, sea forts, heavy rain
SahyadriNorth-south wall of hillsKalsubai; Thal and Bhor ghats; hill stations
Deccan plateauMost of the state, east of the SahyadriBasalt layers (Deccan Traps), black soil, low ranges
Satpura hillsNorthern borderToranmal, Chikhaldara, Melghat forests

Konkan and Deccan plateau

  • Konkan
    • Narrow coastal plain
    • Very heavy rain
    • Laterite soil, rice and mango
  • Deccan plateau
    • Wide basalt plateau
    • Less rain east of the Sahyadri
    • Black soil, cotton and jowar

Worked example 1: which pass?

Question: 'A train from Mumbai to Pune climbs the Sahyadri through which ghat?' Working: the Mumbai-Pune route climbs through the Bhor ghat near Khandala, while the Mumbai-Nashik route uses the Thal ghat near Kasara. So the answer is the Bhor ghat.

Worked example 2: why is the plateau made of basalt?

Question: 'Why is the rock of the Deccan plateau dark basalt?' Working: the plateau was built by great outpourings of lava, which cooled into basalt layers - the Deccan Traps. So the answer is that the plateau is made of cooled lava flows.

Three bands: Konkan - Sahyadri - Deccan plateau. Highest peak - Kalsubai. Mumbai-Nashik - Thal ghat; Mumbai-Pune - Bhor ghat. Deccan Traps - basalt from lava. Lonar - meteorite crater, Buldhana.

Key takeaways

  • Maharashtra has three main physical divisions: the Konkan coast, the Sahyadri and the Deccan plateau, with the Satpura hills on the northern border.
  • Kalsubai is the highest peak; the Thal and Bhor ghats are the main passes from Mumbai.
  • The Deccan plateau is made of basalt layers called the Deccan Traps.
  • Lonar lake in Buldhana lies in a meteorite crater.

Check your understanding

  1. 1. What is the highest peak of Maharashtra?

    1. Mahabaleshwar
    2. Kalsubai
    3. Toranmal
    4. Chikhaldara
    Show answer

    Answer: B. Kalsubai, in the Sahyadri, is the highest peak of Maharashtra at about 1,646 metres.

  2. 2. The Bhor ghat lies on the route between Mumbai and:

    1. Nashik
    2. Goa
    3. Pune
    4. Nagpur
    Show answer

    Answer: C. The Bhor ghat near Khandala carries the Mumbai-Pune route. The Thal ghat carries the Mumbai-Nashik route.

  3. 3. The Deccan Traps are made mainly of:

    1. Basalt from lava flows
    2. Sandstone
    3. Marble
    4. Coral limestone
    Show answer

    Answer: A. The Deccan Traps are layers of basalt formed when lava flows cooled.

  4. 4. Lonar lake in Buldhana district is known as:

    1. A dam reservoir
    2. A glacial lake
    3. An oxbow lake of the Godavari
    4. A crater formed by a meteorite impact
    Show answer

    Answer: D. Lonar lake lies in a crater formed by a meteorite impact on the basalt plateau.

  5. 5. Chikhaldara, a hill station in Amravati district, lies in which hills?

    1. Gawilgarh hills of the Satpura
    2. Mahadeo hills
    3. Ajanta hills
    4. Sahyadri near Mumbai
    Show answer

    Answer: A. Chikhaldara is in the Gawilgarh hills, part of the Satpura range in the Melghat area.

Sign in to keep track of the lessons you finish.

Next lesson → Rivers, dams and lakes of Maharashtra

Privacy · Terms · Refunds · Delivery