• Foundation
  • About 10 min
  • 5 practice questions

What figure completion asks

Understand the two kinds of figure-completion questions and use area counting to remove options that cannot fit the gap.

If something looks wrong, please tell us.

A figure-completion question shows a figure with a piece missing, and four pieces to choose from. You choose the piece that completes the figure. It is like finishing a jigsaw puzzle where only one piece is left. Two kinds of rule are used: the piece must fit the shape of the gap, and it must continue the pattern of the figure.

Kind 1: fit the gap

Here the full figure is a plain shape, such as a square or rectangle, with a piece cut out. The correct option is the piece that fills the gap exactly, with no overlap and no hole left. The piece is normally not turned or flipped, unless the question says so. Compare the size and the outline of the gap with each option.

Kind 2: continue the pattern

Here the figure has a design, such as stripes, a repeated shape or a symmetrical picture. The missing piece must carry on the design: lines must continue across its edges and the repeat must not break.

Counting cells

When the figure is drawn on a grid, count the number of cells in the gap. The correct piece must have exactly the same number of cells. This one step often removes two options.

A 3 by 3 grid with a gap (G is the gap)
Column 1Column 2Column 3
filledfilledfilled
filledfilledG
filledGG

The gap in the table has 3 cells, shaped like an L: two cells in the bottom row and one cell above the right-hand one.

Worked examples

Example 1. A 4 by 4 grid has 16 cells. A gap of 5 cells is cut out. How many cells must the missing piece have? Working: the piece fills the gap exactly. Answer: 5 cells.

Example 2. A gap has 3 cells. The four options have 2, 3, 3 and 4 cells. Which can be right? Working: the number must be 3. Answer: either of the two options with 3 cells; then compare the shapes.

Example 3. In the table above, the gap is an L-shaped group of 3 cells. Option P is a straight bar of 3 cells, option Q is an L of 3 cells with the corner at the bottom-right, option R is an L of 3 cells with the corner at the top-left. Which fits? Working: the gap has its corner cell at the bottom-right: cells (row 2, column 3), (row 3, column 3) and (row 3, column 2). The corner is at row 3, column 3, which is the bottom-right. Answer: Q.

Count the cells of the gap first, then check the shape of its outline, then the pattern.

— Rule to remember

Key takeaways: count the cells, match the outline, then check the pattern.

Check your understanding

  1. 1. A 4 by 4 grid has 16 cells. A gap of 5 cells is cut out of it. How many cells must the missing piece have?

    1. 5
    2. 6
    3. 10
    4. 11
    Show answer

    Answer: A. The missing piece fills the gap exactly, with no overlap and no hole left, so it has the same number of cells as the gap: 5.

  2. 2. A gap has 3 cells. The four options have 2, 3, 3 and 4 cells. How many options are still possible after counting cells?

    1. 1
    2. 2
    3. 3
    4. 4
    Show answer

    Answer: B. Only pieces with exactly 3 cells can fill a 3-cell gap. Two options have 3 cells, so 2 remain; their shapes are then compared with the outline of the gap.

  3. 3. A 3 by 3 grid is filled except for three cells: row 2 column 3, row 3 column 3 and row 3 column 2. Where is the corner cell of this L-shaped gap?

    1. Top-left (row 1, column 1)
    2. Bottom-right (row 3, column 3)
    3. Bottom-left (row 3, column 1)
    4. Top-right (row 1, column 3)
    Show answer

    Answer: B. Cell (row 3, column 3) touches both other gap cells: the one above it and the one to its left. So it is the corner of the L, at the bottom-right. The correct piece is an L with its corner at the bottom-right.

  4. 4. A figure has a gap of 2 cells side by side horizontally. An option has 2 cells stacked vertically. Pieces may not be turned. Does the option fit?

    1. Yes, because it has 2 cells
    2. Yes, if it is placed carefully
    3. No, because it has the wrong number of cells
    4. No, a vertical pair cannot fill a horizontal gap without turning
    Show answer

    Answer: D. The cell count is right (2), but the outline is not: the gap is 2 wide and 1 tall, the option is 1 wide and 2 tall. Since pieces are not turned, it does not fit.

  5. 5. Which two things must every correct piece do in a figure-completion question?

    1. Be the largest option and be symmetrical
    2. Fit the shape of the gap and continue the pattern of the figure
    3. Have the most lines and be turned the right way
    4. Match the colour and be a square
    Show answer

    Answer: B. The lesson names two kinds of rule: the piece must fit the gap (size and outline) and must carry on the design of the figure across its edges.

Privacy · Terms · Refunds · Delivery