- Advanced
- About 12 min
- 5 practice questions
Cuts on the crease and cuts away from it
Predict the shape and number of cut-outs when a notch is cut on, next to, or away from the folded edge of a sheet.
If something looks wrong, please tell us.
In paper cutting, a folded sheet has a shape cut out of it and you must picture the opened sheet. The cut goes through all the layers, so each layer gets its own copy of the cut. Which copies join up depends on whether the cut touches a crease.
The basic rule
After one fold, the sheet has two layers. The crease acts as a mirror: the opened sheet shows the cut and its mirror image across the crease.
- Cut away from the crease: two separate cut-outs, mirror images of each other.
- Cut touching the crease along an edge: the two copies join into one cut-out, symmetric about the crease and twice as wide.
- Cut touching the crease at only one point (a corner): two cut-outs that touch at that single point.
| Cut on the folded sheet | Shape when opened |
|---|---|
| Semicircle with its flat side on the crease | A full circle |
| Square with one side on the crease | A rectangle twice as wide as the square |
| Right-angled triangle with one leg on the crease | An isosceles triangle, with its apex on the crease and the base at right angles to the crease |
| Small circle away from the crease | Two circles, mirror images of each other |
| Triangle touching the crease only at its tip | Two triangles meeting at a point |
Worked examples
Example 1. A sheet is folded in half vertically. A semicircle is cut with its flat side along the crease. On opening, the two semicircles join along the crease into a full circle. Example 2. A right-angled triangle is cut with one leg of length 3 along the crease and the other leg of length 2 at right angles to it. The opened shape is an isosceles triangle with base 2 + 2 = 4 (at right angles to the crease) and height 3 (along the crease), with its apex on the crease.
Example 3. A 2 by 2 square is cut away from the crease, with its nearest side 1 unit from the crease. Opening the sheet shows two squares, one on each side, each 1 unit from the crease, so 2 units apart.
A cut that touches the crease joins up with its mirror image; a cut that does not touch it appears twice.
Key takeaways: a cut on the crease doubles in size and becomes one symmetric shape; a cut away from the crease appears twice.
Check your understanding
-
1. A sheet is folded once and a semicircle is cut with its flat side on the crease. What is the opened cut-out?
- A semicircle
- Two semicircles
- A circle
- An oval
Show answer
Answer: C. The semicircle and its mirror image share the flat side on the crease and join into a full circle.
-
2. A sheet is folded once. A right-angled triangle is cut with a leg of 3 along the crease and a leg of 2 at right angles to it. What is the opened cut-out?
- An isosceles triangle with base 6 and height 2
- An isosceles triangle with base 4 and height 3
- A rectangle 4 by 3
- Two separate right-angled triangles
Show answer
Answer: B. The leg on the crease stays 3 and becomes the height, with the apex on the crease. The leg of 2 is mirrored: base 2 + 2 = 4, at right angles to the crease.
-
3. A sheet is folded once and a 2 by 2 square is cut with its nearest side 1 unit from the crease. How far apart are the two squares on the opened sheet?
- 1 unit
- 0 units: they touch
- 2 units
- 4 units
Show answer
Answer: C. Each square is 1 unit from the crease, on opposite sides, so the gap between them is 1 + 1 = 2 units.
-
4. A sheet is folded once and a rectangle 3 units wide is cut with one side on the crease. How wide is the opened cut-out, measured across the crease?
- 6 units
- 3 units
- 1.5 units
- 9 units
Show answer
Answer: A. The rectangle and its mirror image share the side on the crease: 3 + 3 = 6 units.
-
5. A sheet is folded once and a triangle is cut that touches the crease only at its tip. What does the opened sheet show?
- One larger triangle
- One rhombus
- Two triangles far apart
- Two triangles meeting at a single point
Show answer
Answer: D. Only a point is on the crease, so the two mirror copies meet at that point and do not join along an edge.
Sign in to keep track of the lessons you finish.