• Foundation
  • 15 practice questions

Final self-assessment: Spatial Visualisation (Foundation)

Test yourself on the whole course: 15 questions with answers explained.

If something looks wrong, please tell us.

Attempt all 15 questions without looking back at the lessons, then check your answers and read each explanation. The questions are a little harder than the checks after each lesson.

Final self-assessment

  1. 1. A cone and a cylinder stand on their bases side by side. Which statement is true?

    1. Both look like circles from above; from the front the cone is a rectangle and the cylinder a triangle
    2. Both look like triangles from the front
    3. Both look like circles from above; from the front the cone is a triangle and the cylinder a rectangle
    4. Both look like circles from every direction
    Show answer

    Answer: C. From the top each shows its circular base. From the side, the cone narrows to a point (a triangle) while the cylinder goes straight up (a rectangle).

  2. 2. A solid's top view is a square with lines from the centre to the four corners. What is its front view?

    1. A triangle
    2. A square
    3. A circle
    4. A rectangle
    Show answer

    Answer: A. Lines from the centre to the corners are the sloping edges of a square pyramid seen from above. From the front a square pyramid looks like a triangle.

  3. 3. Which pair of solids both show a circle as their top view when standing on their bases?

    1. Cube and cone
    2. Cylinder and square pyramid
    3. Cuboid and sphere
    4. Cylinder and cone
    Show answer

    Answer: D. A cylinder and a cone both have a circular base, so both look like circles from above. A cube, cuboid and square pyramid look square or rectangular from above.

  4. 4. A plan of heights has three rows, front to back: (2, 0, 1), (3, 1, 0) and (1, 2, 2). How many cubes are there?

    1. 7
    2. 12
    3. 11
    4. 14
    Show answer

    Answer: B. Row totals: 2 + 0 + 1 = 3, 3 + 1 + 0 = 4, 1 + 2 + 2 = 5. Total 3 + 4 + 5 = 12.

  5. 5. For the plan with rows (2, 0, 1), (3, 1, 0) and (1, 2, 2) from front to back, what is the front view, left to right?

    1. 2, 3 and 2
    2. 3, 2 and 2
    3. 2, 0 and 1
    4. 6, 3 and 3
    Show answer

    Answer: B. The front view takes the tallest in each column. Left column 2, 3, 1: tallest 3. Middle 0, 1, 2: tallest 2. Right 1, 0, 2: tallest 2. (2, 3, 2 is the side view, the tallest in each row.)

  6. 6. For the same plan, rows (2, 0, 1), (3, 1, 0) and (1, 2, 2), how many cubes are above the bottom layer?

    1. 7
    2. 12
    3. 4
    4. 5
    Show answer

    Answer: D. The bottom layer has a cube wherever the height is at least 1: 2 + 2 + 3 = 7 places. Total 12, so 12 - 7 = 5 cubes are above it.

  7. 7. A solid with flat faces has 6 faces and 6 vertices. How many edges does it have?

    1. 10
    2. 12
    3. 14
    4. 8
    Show answer

    Answer: A. F + V - E = 2, so 6 + 6 - E = 2 and E = 10 (for example, a pyramid on a five-sided base).

  8. 8. Which solid has 5 faces and 6 vertices?

    1. Square pyramid
    2. Triangular pyramid
    3. Triangular prism
    4. Cuboid
    Show answer

    Answer: C. A triangular prism has 2 triangles + 3 rectangles = 5 faces and 3 + 3 = 6 vertices. A square pyramid has 5 faces but 5 vertices.

  9. 9. How many flat faces do a cylinder, a cone and a cube have altogether?

    1. 11
    2. 8
    3. 7
    4. 9
    Show answer

    Answer: D. Cylinder: 2 flat (its curved side is not flat). Cone: 1 flat. Cube: 6 flat. 2 + 1 + 6 = 9. Counting the curved faces too would give 11.

  10. 10. A person faces west, turns 90 degrees clockwise, then turns 270 degrees clockwise. Which way does the person face?

    1. East
    2. West
    3. North
    4. South
    Show answer

    Answer: B. 90 + 270 = 360 degrees, a full turn, so the person faces the starting direction, west.

  11. 11. A 3 by 3 grid holds an L: the whole left column is filled and so is the middle cell of the bottom row. The grid is turned 90 degrees anticlockwise. What does it look like?

    1. The stem lies along the top row and the foot points down from its left end
    2. The stem lies down the right column and the foot points left from its top
    3. The stem lies along the bottom row and the foot points up from its right end
    4. The stem lies along the bottom row and the foot points up from its left end
    Show answer

    Answer: C. A 90 degree anticlockwise turn equals a 270 degree clockwise turn. The left column becomes the bottom row, with its top cell going to the left end and its bottom cell to the right end. The foot was beside the bottom of the stem, so it now sits above the right end of the bottom row. (The top-row answer is the clockwise turn; the right-column answer is the 180 degree turn.)

  12. 12. An arrow points down. After a 270 degree clockwise turn, where does it point?

    1. Right
    2. Left
    3. Up
    4. Down
    Show answer

    Answer: A. Down, then left at 90, up at 180 and right at 270 degrees clockwise.

  13. 13. A block is 5 cubes long, 4 wide and 3 high. How many cubes does it contain?

    1. 60
    2. 12
    3. 47
    4. 20
    Show answer

    Answer: A. 5 x 4 x 3 = 60.

  14. 14. A solid with flat faces has 8 faces and 12 vertices. How many edges does it have?

    1. 22
    2. 20
    3. 18
    4. 16
    Show answer

    Answer: C. F + V - E = 2, so 8 + 12 - E = 2 and E = 18 (for example, a hexagonal prism).

  15. 15. A 4 by 4 by 4 cube built of 64 small cubes stands on a table. You look at the top and the four sides. How many small cubes cannot be seen at all?

    1. 8
    2. 12
    3. 4
    4. 16
    Show answer

    Answer: B. A cube is hidden if it is on none of the top or four side faces. Away from the four sides leaves the middle 2 by 2 in each layer, and away from the top leaves the lower 3 layers: 2 x 2 x 3 = 12. These are the 8 inner cubes plus the 4 in the middle of the bottom layer, whose only outside face touches the table.

Questions 1-3: lesson 1, "Seeing solids from the top, front and side". Questions 4-6: lesson 2, "Counting cubes in a stack". Questions 7-9: lesson 3, "Faces, edges and corners of solids". Questions 10-12: lesson 4, "Turning shapes: rotation on a grid". Questions 13-15: lesson 5, "Spatial visualisation: mixed practice and exam method". Revisit a lesson for the questions you missed.

Privacy · Terms · Refunds · Delivery