- Practice
- About 14 min
- 5 practice questions
Mixed spatial visualisation practice
Practise height grids, views, turns and surface counts together with a routine and the common traps.
If something looks wrong, please tell us.
Mixed questions test whether you can switch between the ideas of this course. The routine is short, but each step must be done in order.
Routine
- Say what is being asked: a count, a view, a turn or a surface.
- Write down or picture the height grid or the grid of letters.
- Apply the matching rule: sum, tallest column, position formula, or 6n minus 2p.
- Check with a quick estimate.
Common traps
- Adding instead of taking the tallest column in a view.
- Reading a side view in the wrong direction.
- Using the clockwise formula for an anticlockwise turn.
- Counting cubes that touch along an edge as touching pairs.
Worked examples
Example 1. A height grid has rows 2, 0 and 1, 3. The total is 2 plus 0 plus 1 plus 3 = 6 cubes.
Example 2. Height grid 3 had rows 1, 2, 4 (back), 3, 0, 1 (middle) and 2, 1, 2 (front). The front view is 3, 2, 4.
Example 3. In a 3 by 3 grid, the cell at row 1, column 2 turns a quarter turn clockwise to row 2, column 3.
Say what is asked, picture the grid, use the matching rule, check.
Key takeaways
- Follow the four-step routine.
- Views use the tallest column; totals use the sum.
- Use position formulas to check turns.
Check your understanding
-
1. A 2 by 2 height grid has rows (3, 0) and (2, 4). How many cubes are there?
- 7
- 9
- 8
- 12
Show answer
Answer: B. Total = sum of the numbers: 3 + 0 + 2 + 4 = 9.
-
2. A height grid has a back row (2, 1, 3) and a front row (1, 4, 0). What is the front view, left to right?
- 2, 4 and 3
- 3, 5 and 3
- 1, 4 and 0
- 3, 4 and 2
Show answer
Answer: A. Take the tallest in each column, not the sum: column 1 has 2 and 1, so 2; column 2 has 1 and 4, so 4; column 3 has 3 and 0, so 3. Adding gives the trap answer 3, 5, 3.
-
3. In a 3 by 3 grid, where does the cell at row 2, column 1 go after an anticlockwise quarter turn?
- Row 1, column 2
- Row 2, column 3
- Row 3, column 1
- Row 3, column 2
Show answer
Answer: D. Anticlockwise: (n + 1 - c, r) = (4 - 1, 2) = (3, 2). Using the clockwise formula by mistake would give row 1, column 2.
-
4. Four cubes form a 2 by 2 square layer and a fifth cube sits on top of one of them. How many faces are exposed?
- 22
- 18
- 20
- 25
Show answer
Answer: C. n = 5. The layer has 4 touching pairs, and the top cube adds 1 more: p = 5. Faces: 30 - 10 = 20.
-
5. Which of these is a common trap in view questions?
- Adding the heights along a line of sight instead of taking the tallest
- Taking the tallest column along each line of sight
- Reading the right view from front to back
- Counting one top square for every non-empty column
Show answer
Answer: A. A view shows only the tallest column along each line of sight. Adding the heights is the trap; the other three are the correct methods.
Sign in to keep track of the lessons you finish.