Revision notes

Spatial Visualisation: Practice

The key points, rules to remember, tables and diagrams from all 9 lessons, on one page for quick revision. To keep a copy, use your browser's Print and choose "Save as PDF".

Lesson 1

Stacks of cubes: counting from a height grid

Height grid 1
Column 1Column 2Column 3
213
102
321

Add all the numbers for the total. The top view shows one square for every column that is not empty.

— Rule to remember
Height grid 2
Column 1Column 2Column 3
321
012
201
  • A height grid is a plan view with column heights.
  • Total cubes = sum of the numbers.
  • Top view squares = number of non-empty columns.
Read the full lesson

Lesson 2

Front, side and top views of a stack

Height grid 3 (top row is the back)
Column 1Column 2Column 3
124
301
212

A view shows only the tallest column along each line of sight. Say which side you are looking from and read left to right as that viewer would.

— Rule to remember
Height grid 4 (top row is the back)
Column 1Column 2Column 3
231
412
  • Each view shows the tallest column along each line of sight.
  • Front view: tallest in each grid column. Side views: tallest in each grid row.
  • Left and right views are read in opposite orders.
Read the full lesson

Lesson 3

Turning a pattern: quarter turns and half turns

Original
Column 1Column 2Column 3
ABC
DEF
GHI
After a quarter turn clockwise
Column 1Column 2Column 3
GDA
HEB
IFC
After a half turn
Column 1Column 2Column 3
IHG
FED
CBA
After a quarter turn anticlockwise
Column 1Column 2Column 3
CFI
BEH
ADG

Clockwise quarter turn: (r, c) goes to (c, n plus 1 minus r). Corners go top-left, top-right, bottom-right, bottom-left, round and round.

— Rule to remember
  • Corners move round in order for a clockwise quarter turn.
  • Use the position formulas to check one cell at a time.
  • Three clockwise quarter turns equal one anticlockwise.
Read the full lesson

Lesson 4

Surface faces of solids made of cubes

Exposed faces = 6 times the number of cubes minus 2 times the number of touching pairs.

— Rule to remember
  • Start with 6 faces per cube.
  • Subtract 2 for each touching pair.
  • Cubes touching only along an edge do not hide any face.
Read the full lesson

Lesson 5

Mixed spatial visualisation practice

Say what is asked, picture the grid, use the matching rule, check.

— Rule to remember
  • Follow the four-step routine.
  • Views use the tallest column; totals use the sum.
  • Use position formulas to check turns.
Read the full lesson

Lesson 6

Painted cubes: counting small cubes by the number of painted faces

Painted faces by position
Type of positionPainted facesHow manyWhy
Corner38A cube has 8 corners
Edge, not a corner212(n - 2)12 edges, each with n - 2 cubes between the corners
Face, not on an edge16(n - 2)(n - 2)6 faces, each with an (n - 2) by (n - 2) square in the middle
Inside0(n - 2) cubedThe cube left when the outer layer is removed
The counts for several sizes
nThree facesTwo facesOne faceNo paintTotal
38126127
482424864
58365427125
68489664216

Corners 8. Edges 12(n - 2). Faces 6(n - 2) squared. Inside (n - 2) cubed. They must add to n cubed.

  • Sort the small cubes into corner, edge, face and inside types.
  • Each type has a count you can write as a formula in n.
  • Find n from the total: the cube root of the number of small cubes.
  • If only some faces are painted, count layer by layer instead of using the formulas.
Read the full lesson

Lesson 7

Cross-sections of solids: what shape does a straight cut make?

Cross-sections
SolidCut parallel to the baseCut straight down through the axis
CubeSquare, the same size as the baseSquare or rectangle
CuboidRectangle, the same as the baseRectangle
CylinderCircle, the same size as the baseRectangle
ConeSmaller circleTriangle with two equal sides
SphereCircleCircle, the largest possible
Square pyramidSquare, smaller than the baseTriangle

Parallel to the base: the same shape as the base (a smaller one for a cone or pyramid). Down through the axis: a rectangle for a cylinder, a triangle for a cone. A sphere always gives a circle.

  • Decide first whether the cut is parallel to the base, through the axis, or slanted.
  • A sphere has only circular cross-sections.
  • A cone cut parallel to its base: radius in proportion to the distance from the point.
  • A slanted cut across a cylinder gives an oval.
Read the full lesson

Lesson 8

Counting squares, rectangles and triangles in a figure

Squares in grids
GridWorkingTotal squares
2 by 36 + 28
3 by 39 + 4 + 114
4 by 416 + 9 + 4 + 130
8 by 864 + 49 + 36 + 25 + 16 + 9 + 4 + 1204

Squares: add (m - k + 1)(n - k + 1) over every size k. Rectangles: [m(m + 1)/2] times [n(n + 1)/2]. Triangles from one corner: n(n + 1)/2.

  • Count by size, smallest to largest, so that nothing is missed.
  • A rectangle is a choice of two vertical and two horizontal lines.
  • Rectangles include squares; subtract if the question asks for rectangles that are not squares.
  • For triangles from one corner, count pairs of points on the base.
Read the full lesson

Lesson 9

Rolling a cube: tracking the top face through a path

What each roll does (new = old)
RollNew TopNew BottomNew NorthNew SouthNew EastNew West
Eastold Westold Eastsamesameold Topold Bottom
Westold Eastold Westsamesameold Bottomold Top
Northold Southold Northold Topold Bottomsamesame
Southold Northold Southold Bottomold Topsamesame

Use a table of six faces. In each roll, the faces on the line of the roll move round and the other two stay. Two rolls the same way swap top and bottom.

  • Write out all six faces after every roll; never track only the top.
  • The two faces at right angles to the roll stay where they are.
  • Four rolls in a line restore the cube; rolling round a square does not.
  • Use the opposite-sum rule of 7 to fill in the hidden faces.
Read the full lesson

Privacy · Terms · Refunds · Delivery