- Advanced
- About 14 min
- 5 practice questions
Resistance, resistivity and drift velocity
Link resistance to dimensions and temperature, and compute drift velocity of electrons in a conductor.
If something looks wrong, please tell us.
Resistance measures how strongly a conductor opposes the flow of charge. Ohm's law, V = I R, holds for ohmic conductors at constant temperature. This lesson connects resistance to the physical shape of the wire and to the motion of electrons inside it.
Key results
- R = ρ L / A, where ρ is the resistivity of the material (unit ohm metre). It depends on the material and temperature, not on the shape.
- Temperature dependence for a metal: R = R₀ (1 + α ΔT), where α is the temperature coefficient of resistance.
- Drift velocity v_d: I = n A e v_d, where n is the number density of free electrons, A the area and e = 1.6 × 10⁻¹⁹ C.
- Current density J = I / A = n e v_d, and J = σ E with σ = 1 / ρ.
Worked example 1: stretching a wire
A wire of resistance 10 Ω is stretched uniformly to three times its length. The volume stays the same, so the area falls to one-third. R' = ρ (3L) / (A/3) = 9 ρ L / A = 9 R = 90 Ω. In general, stretching by a factor k multiplies the resistance by k². If instead the wire is cut into 3 equal pieces and the pieces are connected in parallel, R = 10 / 9 ≈ 1.11 Ω.
Worked example 2: drift velocity
A copper wire of cross-section 1 mm² carries 1 A. Taking n = 8.5 × 10²⁸ m⁻³: v_d = I / (n A e) = 1 / (8.5 × 10²⁸ × 10⁻⁶ × 1.6 × 10⁻¹⁹) = 1 / (1.36 × 10⁴) ≈ 7.4 × 10⁻⁵ m/s. The electrons drift less than a tenth of a millimetre per second, yet the signal moves much faster because the electric field is set up almost instantly along the wire.
Temperature: a coil has resistance 100 Ω at 0 °C and α = 0.004 per °C. At 50 °C: R = 100 (1 + 0.004 × 50) = 120 Ω.
R = ρL/A. Stretching to k times the length multiplies R by k². R = R₀(1 + αΔT) for a metal. I = nAev_d.
Key takeaways
- Resistance depends on length, area and material.
- Stretching a wire raises resistance by the square of the stretch factor.
- Drift velocity is tiny; the signal travels at nearly the speed of light.
Check your understanding
-
1. A 5 Ω wire is stretched uniformly to four times its length. What is its new resistance?
- 80 Ω
- 20 Ω
- 40 Ω
- 1.25 Ω
Show answer
Answer: A. Stretching by a factor k multiplies R by k² (length ×k, area ÷k). R = 5 × 4² = 80 Ω.
-
2. A coil has a resistance of 50 Ω at 0 °C and α = 0.004 per °C. What is its resistance at 100 °C?
- 50.4 Ω
- 20 Ω
- 90 Ω
- 70 Ω
Show answer
Answer: D. R = R₀(1 + αΔT) = 50 × (1 + 0.004 × 100) = 50 × 1.4 = 70 Ω.
-
3. The same current flows through two wires of the same material. One has half the diameter of the other. How does the drift velocity in the thin wire compare with that in the thick wire?
- Twice as large
- Half as large
- The same
- 4 times as large
Show answer
Answer: D. I = nAev_d, so v_d ∝ 1/A. Half the diameter gives one quarter of the area, so v_d is 4 times as large.
-
4. A 32 Ω wire is cut into 4 equal pieces, which are then connected in parallel. What is the resultant resistance?
- 8 Ω
- 2 Ω
- 128 Ω
- 0.5 Ω
Show answer
Answer: B. Each piece is 32 ÷ 4 = 8 Ω. Four 8 Ω in parallel give 8 ÷ 4 = 2 Ω (R/16 in all).
-
5. On what does the resistivity of a wire depend?
- Its length and area only
- Its length, area and material
- Its material and temperature, not its length or area
- Only the current through it
Show answer
Answer: C. Resistivity is a property of the material (and changes with temperature); resistance R = ρL/A also depends on shape.
Sign in to keep track of the lessons you finish.