• Advanced
  • About 14 min
  • 5 practice questions

Free-body diagrams and the Atwood machine

Draw free-body diagrams, write F = ma for each body and solve pulley problems such as the Atwood machine.

If something looks wrong, please tell us.

Newton's second law, F_net = m a, is the engine behind every dynamics problem. At the advanced level the skill is not the law itself but setting it up correctly: isolate each body, draw all forces on it, and write one equation per body.

Method

  1. Isolate one body and draw only the forces acting ON it (weight, normal reaction, tension, friction, applied forces).
  2. Choose axes, usually along and perpendicular to the expected motion.
  3. Write F_net = m a along each axis.
  4. Connect bodies using constraints: a string of fixed length gives equal acceleration magnitudes; the same light string over a smooth pulley has the same tension throughout.

The Atwood machine

Two masses m₁ > m₂ hang over a light, smooth pulley. For m₁ (moving down): m₁ g − T = m₁ a. For m₂ (moving up): T − m₂ g = m₂ a. Adding: a = (m₁ − m₂) g / (m₁ + m₂). Substituting back: T = 2 m₁ m₂ g / (m₁ + m₂).

Worked example 1

Let m₁ = 3 kg, m₂ = 1 kg and g = 10 m/s². Then a = (3 − 1)(10) / 4 = 5 m/s². T = 2 × 3 × 1 × 10 / 4 = 15 N. Check on m₁: 30 − 15 = 15 = 3 × 5. Correct. Note T is less than m₁ g (30 N) and more than m₂ g (10 N), as it must be.

Worked example 2: force on the pulley support

The pulley is held by a string above it. The two string segments each pull down with T = 15 N, so the support must supply 2T = 30 N upward. This is less than the total weight (40 N) of the masses, because the system as a whole is accelerating downward on the heavy side.

Atwood machine: a = (m₁ − m₂)g/(m₁ + m₂), T = 2m₁m₂g/(m₁ + m₂). One equation per body, then use the string constraint.

— Formulas to remember

Key takeaways

  • Write one F = ma equation per body, with all forces on that body only.
  • A light string over a smooth pulley carries the same tension on both sides.
  • Tension lies between the two weights in an Atwood machine.

Check your understanding

  1. 1. Masses of 4 kg and 1 kg hang over a light, smooth pulley. What is the acceleration? (Take g = 10 m/s².)

    1. 10 m/s²
    2. 6 m/s²
    3. 3 m/s²
    4. 7.5 m/s²
    Show answer

    Answer: B. a = (m₁ − m₂)g ÷ (m₁ + m₂) = (4 − 1) × 10 ÷ 5 = 6 m/s².

  2. 2. For the same Atwood machine (4 kg and 1 kg, g = 10 m/s²), what is the tension in the string?

    1. 40 N
    2. 10 N
    3. 25 N
    4. 16 N
    Show answer

    Answer: D. T = 2m₁m₂g ÷ (m₁ + m₂) = 2 × 4 × 1 × 10 ÷ 5 = 16 N. Check: 40 − 16 = 24 = 4 × 6.

  3. 3. In an Atwood machine with unequal masses, how does the string tension T compare with the two weights?

    1. T lies between the smaller weight and the larger weight
    2. T equals the larger weight
    3. T equals the sum of the weights
    4. T is less than both weights
    Show answer

    Answer: A. The heavy mass accelerates down, so T < m₁g; the light mass accelerates up, so T > m₂g.

  4. 4. A 3 kg block is pulled upward by a string with an acceleration of 2 m/s². What is the tension? (Take g = 10 m/s².)

    1. 30 N
    2. 24 N
    3. 36 N
    4. 6 N
    Show answer

    Answer: C. T − mg = ma, so T = m(g + a) = 3 × 12 = 36 N.

  5. 5. Masses of 3 kg and 1 kg hang over a light pulley held by a support string (g = 10 m/s²; tension in the main string 15 N). What force does the support exert on the pulley?

    1. 40 N
    2. 15 N
    3. 30 N
    4. 20 N
    Show answer

    Answer: C. Both string segments pull down on the pulley with T = 15 N, so the support supplies 2T = 30 N - less than the 40 N total weight because the heavy side accelerates down.

Privacy · Terms · Refunds · Delivery