• Foundation
  • About 13 min
  • 5 practice questions

Friction

Understand static and kinetic friction, the formula f = μN, and how to reduce or increase friction.

If something looks wrong, please tell us.

A rolling ball eventually stops even if nothing hits it. The invisible force responsible is friction. It is useful when we walk or brake, and wasteful when it wears out machine parts.

What is friction?

Friction is the force that opposes the relative motion, or the tendency of motion, between two surfaces in contact. It acts along the surfaces, opposite to the motion. It arises because even smooth-looking surfaces have tiny bumps that interlock.

  • Static friction acts when the body is not moving; it matches the applied force up to a maximum value.
  • Kinetic (sliding) friction acts once the body slides; it is usually a bit less than the maximum static friction.
  • Rolling friction is much smaller than sliding friction, which is why wheels are used.

The friction formula

The limiting or sliding friction is f = μN, where N is the normal force (the push of the surface on the body) and μ is the coefficient of friction, a number with no unit that depends on the pair of surfaces. On a flat horizontal surface, N = mg.

Worked examples (g = 9.8 m/s²)

Example 1. A 20 kg block rests on a floor with μ = 0.3. N = mg = 20 × 9.8 = 196 N. Friction f = 0.3 × 196 = 58.8 N.

Example 2. A student pushes a box with 40 N and it does not move, though the maximum friction is 60 N. Static friction equals the applied force, 40 N, not 60 N.

Example 3. A 10 kg block (g = 10 m/s²) is pulled with 50 N on a surface where sliding friction is 20 N. Net force = 50 − 20 = 30 N. a = 30 ÷ 10 = 3 m/s².

Reducing friction: lubricants, ball bearings, polishing. Increasing friction: grooved tyres, rough soles, sand on slippery roads.

f = μN. On level ground N = mg. Rolling friction is less than sliding friction.

— Formula

Key takeaways

  • Friction opposes motion or its tendency.
  • f = μN, where N is the normal force.
  • Static friction adjusts itself up to a limit; rolling friction is the smallest.

Check your understanding

  1. 1. A 10 kg block lies on a floor with coefficient of friction 0.5. What is the limiting friction? (Take g = 10 m/s².)

    1. 50 N
    2. 5 N
    3. 20 N
    4. 100 N
    Show answer

    Answer: A. N = mg = 10 × 10 = 100 N. f = μN = 0.5 × 100 = 50 N.

  2. 2. A box is pushed with 25 N but does not move. The maximum static friction is 40 N. What is the friction force acting?

    1. 40 N
    2. 25 N
    3. 15 N
    4. 65 N
    Show answer

    Answer: B. Static friction adjusts to match the applied force up to its maximum, so here it is 25 N.

  3. 3. In which direction does friction act on a body?

    1. Along the direction of motion
    2. Always upward
    3. Always perpendicular to the surface
    4. Opposite to its motion or to its tendency to move
    Show answer

    Answer: D. Friction acts along the surfaces in contact, opposing the relative motion or the tendency of motion.

  4. 4. A 5 kg block is pulled along a floor with 40 N while the sliding friction is 15 N. What is its acceleration?

    1. 5 m/s²
    2. 8 m/s²
    3. 3 m/s²
    4. 11 m/s²
    Show answer

    Answer: A. Net force = 40 − 15 = 25 N. a = 25 ÷ 5 = 5 m/s².

  5. 5. Which of these increases friction?

    1. Oiling a hinge
    2. Ball bearings
    3. Grooved tyres
    4. Polishing a surface
    Show answer

    Answer: C. Grooves on tyres increase grip (friction). Lubricants, ball bearings and polishing all reduce friction.

Sign in to keep track of the lessons you finish.

Next lesson → Conservation of momentum and impulse

Privacy · Terms · Refunds · Delivery