• Foundation
  • About 14 min
  • 5 practice questions

Drawing ray diagrams for mirrors and lenses

Use the three standard rays to locate and describe images made by concave mirrors and convex lenses, and check the result with the formula.

If something looks wrong, please tell us.

A ray diagram is a picture that tells you where an image forms, how big it is and whether it is upright or upside down, before you do any calculation. Two or three well-chosen rays are enough. This lesson teaches those rays and the table of results that every student should know by heart.

The three standard rays for a concave mirror

  1. A ray parallel to the principal axis is reflected through the principal focus F.
  2. A ray passing through F is reflected parallel to the principal axis.
  3. A ray passing through the centre of curvature C strikes the mirror along the normal and returns along the same path.

The point where any two of these reflected rays cross is the position of the image of the tip of the object. If the rays only appear to cross when extended backwards behind the mirror, the image is virtual.

The three standard rays for a convex lens

  1. A ray parallel to the principal axis passes through the focus on the far side after refraction.
  2. A ray through the optical centre goes straight on without bending, because the lens is thin.
  3. A ray passing through the focus on the near side emerges parallel to the axis.

Where the image forms: concave mirror

Image formed by a concave mirror
Object positionImage positionNature and size
Beyond CBetween F and CReal, inverted, smaller
At CAt CReal, inverted, same size
Between C and FBeyond CReal, inverted, larger
At FAt infinityReal, inverted, highly larger
Between F and poleBehind the mirrorVirtual, upright, larger

A convex lens follows the same pattern with 2F in place of C. An object beyond 2F gives a smaller real image between F and 2F; an object at 2F gives a real image of the same size at 2F; an object between F and 2F gives a larger real image beyond 2F; and an object between F and the lens gives a larger, virtual, upright image on the same side as the object. This last case is exactly how a magnifying glass works.

Worked example 1: concave mirror

The numbers in these examples are illustrative. A concave mirror has a focal length of 10 cm, so C is at 20 cm. An object stands 25 cm in front of it, beyond C. The table predicts a real, inverted, smaller image between F and C. Check with the mirror formula: u = −25 and f = −10, so 1/v = 1/f − 1/u = −1/10 + 1/25 = (−5 + 2)/50 = −3/50. Hence v = −50/3 ≈ −16.7 cm, which lies between 10 cm and 20 cm. The magnification is m = −v/u = −(−16.7)/(−25) ≈ −0.67, negative and smaller than 1. The diagram and the formula agree.

Worked example 2: convex lens as a magnifier

A convex lens has f = +15 cm. An object is held 10 cm from it, between the lens and the focus. Using 1/v − 1/u = 1/f with u = −10: 1/v = 1/15 + 1/u = 1/15 − 1/10 = (2 − 3)/30 = −1/30, so v = −30 cm. The negative sign shows that the image is virtual and on the same side as the object. The magnification is m = v/u = (−30)/(−10) = +3, so the image is upright and three times larger. This is why a magnifying glass must be held closer to the object than its focal length.

Concave mirror or convex lens: object beyond 2F (or C) gives a smaller real image; between F and the optical element gives a larger virtual image. Parallel ray goes through F; the central ray goes straight (lens) or returns on itself (mirror through C).

— Rules to remember

Common slips

  • Drawing the ray through the lens centre as bent. It does not bend.
  • Forgetting that a virtual image is drawn with dotted lines and cannot be caught on a screen.
  • Using the lens formula for a mirror, or the reverse. Mirrors use 1/v + 1/u = 1/f; lenses use 1/v − 1/u = 1/f.

Key takeaways

Two standard rays are enough to find an image. The position of the object relative to F and C (or 2F) decides whether the image is real or virtual, larger or smaller. Always verify a diagram with the formula, paying attention to the signs.

Check your understanding

  1. 1. A ray travelling parallel to the principal axis of a concave mirror is reflected:

    1. through the principal focus
    2. through the pole of the mirror
    3. parallel to the axis again
    4. along the same path back
    Show answer

    Answer: A. By the first standard rule, a ray parallel to the axis is reflected through the principal focus F of a concave mirror.

  2. 2. An object is placed at the centre of curvature of a concave mirror. The image is:

    1. virtual and larger than the object
    2. real, inverted and larger than the object
    3. real, inverted and of the same size
    4. at infinity and highly larger
    Show answer

    Answer: C. At C the image forms at C, is real and inverted, and has the same size as the object (m = −1).

  3. 3. Which statement about the ray through the optical centre of a thin convex lens is correct?

    1. It bends towards the principal axis
    2. It bends away from the principal axis
    3. It is stopped by the lens
    4. It passes through without any bending
    Show answer

    Answer: D. A thin lens behaves like a thin parallel plate near its centre, so a ray through the optical centre goes straight on.

  4. 4. A convex lens of focal length 12 cm is used as a magnifying glass. The object must be placed:

    1. at a distance of 24 cm
    2. between the lens and 12 cm
    3. at a distance of 12 cm
    4. far beyond 24 cm
    Show answer

    Answer: B. A larger, virtual, upright image forms only when the object is between the lens and its focus, that is within 12 cm.

  5. 5. A concave mirror has f = −10 cm and the object is at u = −25 cm. The image distance v is about:

    1. −25 cm
    2. +16.7 cm
    3. −16.7 cm
    4. −10 cm
    Show answer

    Answer: C. 1/v = 1/f − 1/u = −1/10 + 1/25 = −3/50, so v = −16.7 cm. The negative sign means the image is real, in front of the mirror.

Sign in to keep track of the lessons you finish.

Next lesson → Light through a glass slab and a prism

Privacy · Terms · Refunds · Delivery