• Foundation
  • About 13 min
  • 5 practice questions

Drawing and reading motion graphs from tables of readings

Plot distance-time and velocity-time graphs from readings, and read speed, acceleration and distance from the shape of the line.

If something looks wrong, please tell us.

A graph is a picture of a table of readings. One look at its shape can tell you whether a body is resting, moving steadily or speeding up. This lesson shows how to build a motion graph from a table and how to read speed, acceleration and distance from it, step by step.

Building a graph from a table

  1. Put time on the horizontal axis and the quantity (distance or velocity) on the vertical axis.
  2. Choose a scale so that the points fill most of the paper, for example 1 cm for 2 s and 1 cm for 5 m.
  3. Mark each pair of readings as a point.
  4. Join the points with a smooth line or ruler-straight segments, and label the axes with their units.

Reading a distance-time graph

  • A straight line through the origin means uniform speed; its slope (rise ÷ run) is the speed.
  • A horizontal line means the distance is not changing: the body is at rest.
  • A line that curves upwards, getting steeper, means the body is speeding up.
  • A steeper line means a greater speed.

Reading a velocity-time graph

  • A horizontal line means constant velocity (zero acceleration).
  • A straight sloping line means uniform acceleration; its slope is the acceleration. Rising means speeding up, falling means slowing down.
  • The area between the line and the time axis is the distance travelled.

Worked examples

Example 1. A table gives distance 0, 3, 6, 9, 12 m at times 0, 1, 2, 3, 4 s. The points lie on a straight line through the origin, so the speed is uniform. Slope = rise ÷ run = 12 ÷ 4 = 3 m/s.

Example 2. A distance-time graph has three parts. From 0 to 10 s the line rises from 0 to 20 m. From 10 s to 20 s it is flat at 20 m. From 20 s to 40 s it rises from 20 m to 80 m. Speeds: first part 20 ÷ 10 = 2 m/s; second part 0 (the body rests); third part (80 − 20) ÷ 20 = 3 m/s. Total distance = 80 m in 40 s, so the average speed is 80 ÷ 40 = 2 m/s.

Example 3. A velocity-time graph goes from 0 to 8 m/s in 4 s, stays at 8 m/s until t = 10 s, then falls to 0 at t = 12 s. Acceleration in the first part = 8 ÷ 4 = 2 m/s². Retardation in the last part = 8 ÷ 2 = 4 m/s². Distance is the sum of the areas: triangle ½ × 4 × 8 = 16 m, rectangle 6 × 8 = 48 m, triangle ½ × 2 × 8 = 8 m. Total = 16 + 48 + 8 = 72 m. Average speed = 72 ÷ 12 = 6 m/s.

Common mistakes

Do not read a flat line on a velocity-time graph as 'at rest'. Flat on a velocity-time graph means constant velocity, while flat on a distance-time graph means rest. Always check what the vertical axis is before reading a graph. Also take care to use the scale: a slope calculated by counting squares must be converted using the scale of both axes.

Distance-time graph: slope = speed. Velocity-time graph: slope = acceleration, area = distance. Always check the axes first.

— Rule to remember

Key takeaways

  • Plot time on the horizontal axis and join the points with a ruler or a smooth line.
  • Slope of distance-time = speed; slope of velocity-time = acceleration.
  • Area under a velocity-time graph = distance travelled; split it into triangles and rectangles.
  • A flat line means rest on a distance-time graph but constant velocity on a velocity-time graph.

Check your understanding

  1. 1. On a distance-time graph, a horizontal straight line means the body is:

    1. Moving with constant speed
    2. Moving with increasing speed
    3. At rest
    4. Moving with constant acceleration
    Show answer

    Answer: C. A horizontal line means the distance does not change as time passes, so the body is at rest.

  2. 2. A body's distance is 0, 5, 10, 15 and 20 m at 0, 2, 4, 6 and 8 s. The speed is:

    1. 2.5 m/s
    2. 5 m/s
    3. 10 m/s
    4. 0.4 m/s
    Show answer

    Answer: A. The points lie on a straight line through the origin. Speed = 20 ÷ 8 = 2.5 m/s (each 2 s gap covers 5 m, and 5 ÷ 2 = 2.5).

  3. 3. A velocity-time graph is a straight line rising from 0 m/s at t = 0 to 12 m/s at t = 4 s. The acceleration is:

    1. 48 m/s²
    2. 8 m/s²
    3. 0.33 m/s²
    4. 3 m/s²
    Show answer

    Answer: D. Slope = (12 − 0) ÷ 4 = 3 m/s². The area would give the distance (½ × 4 × 12 = 24 m), not the acceleration.

  4. 4. A body moves at a steady 6 m/s for 5 s and then at a steady 2 m/s for 10 s. The total distance read from the velocity-time graph is:

    1. 20 m
    2. 30 m
    3. 40 m
    4. 50 m
    Show answer

    Answer: D. Area = 6 × 5 + 2 × 10 = 30 + 20 = 50 m.

  5. 5. The velocity-time graph of a car is a horizontal line at 15 m/s. Which statement is correct?

    1. The car is at rest
    2. The car has zero acceleration
    3. The car is speeding up steadily
    4. The car is slowing down steadily
    Show answer

    Answer: B. A horizontal line on a velocity-time graph means the velocity does not change, so acceleration is zero. The car is moving at a constant 15 m/s; it is not at rest.

Privacy · Terms · Refunds · Delivery