• Foundation
  • About 14 min
  • 5 practice questions

Floating and sinking in practice: ships, submarines and balloons

Explain why steel ships float, how a submarine dives and rises, why a ship rides lower in river water, and how a hot-air balloon lifts.

If something looks wrong, please tell us.

A steel nail sinks in water, yet a ship built of steel weighing thousands of tonnes floats. A submarine can sink or rise at will. A balloon full of hot air floats in air. All of these follow from Archimedes' principle, which you already know. This lesson shows how it is used in real machines.

The rule

A body floats in a fluid if its average density is less than the density of the fluid, or equivalently if the buoyant force can equal its weight before it is fully submerged. For a floating body in equilibrium, weight = weight of fluid displaced. A body with the same average density as the fluid hangs in it at any depth.

Ships

A steel ship has a hollow hull full of air. Its average density, the mass of the whole ship divided by the total volume it occupies, is less than the density of water. So it floats while displacing a mass of water exactly equal to its own mass. The Plimsoll line painted on the side of a cargo ship shows the maximum depth to which it may be loaded safely. Sea water is denser than river water, so a ship floats a little higher in the sea than in a river, and the marks on the line allow for this.

Submarines

A submarine has large ballast tanks. To dive, water is let into the tanks, increasing the weight so that it exceeds the buoyant force. To rise, compressed air is used to blow the water out, reducing the weight below the buoyant force. When the weight equals the buoyant force, the submarine stays at one depth.

Balloons

Air is a fluid too, so objects in air feel a buoyant force equal to the weight of the air they displace. A balloon rises if the weight of the balloon, its gas and its load is less than the weight of the displaced air. A hot-air balloon is lifted because heated air is less dense than the cooler air outside. A balloon filled with helium, a light gas, rises for the same reason.

Worked examples

Example 1. A closed steel box has a mass of 8000 kg and an outer volume of 10 m³. Average density = 8000 ÷ 10 = 800 kg/m³, less than 1000 kg/m³ for water, so it floats. The fraction submerged = 800 ÷ 1000 = 0.8, i.e. 8 m³ of the box is under water.

Example 2. A ship of mass 2 × 10⁶ kg floats in river water (1000 kg/m³). It displaces 2 × 10⁶ ÷ 1000 = 2000 m³. In sea water of density about 1025 kg/m³ (a typical value for practice), it displaces 2 × 10⁶ ÷ 1025 ≈ 1951 m³. It displaces less volume, so it floats a little higher in the sea.

Example 3 (submarine). A submarine has an outer volume of 1000 m³ and a mass of 8 × 10⁵ kg when its ballast tanks hold air. Fully under water, the buoyant force would be 1000 × 1000 × 10 = 10⁷ N, but its weight is 8 × 10⁵ × 10 = 8 × 10⁶ N, so it floats. To hang in the water it needs a mass of 10⁶ kg, so it must take in 10⁶ − 8 × 10⁵ = 2 × 10⁵ kg of water. More than that, and it sinks.

Example 4 (balloon). A balloon has a volume of 100 m³. The outside air has a density of 1.2 kg/m³ and the hot air inside 0.9 kg/m³ (illustrative values). Net upward force = (1.2 − 0.9) × 100 × 10 = 300 N. The balloon material and load can have a weight up to 300 N, i.e. a mass of 30 kg.

Floating: weight = weight of fluid displaced. A body floats if its average density is less than the fluid's. Submarines change weight with ballast water.

— Rule to remember

Key takeaways

  • A ship floats because its hollow shape gives it a low average density.
  • A submarine dives by taking water in and rises by blowing it out.
  • A balloon rises when the air it displaces weighs more than it does.

Check your understanding

  1. 1. A steel ship floats because:

    1. Steel is lighter than water
    2. Its average density is less than that of water
    3. It is moving fast
    4. Water pushes upwards on any steel object with a force equal to its weight
    Show answer

    Answer: B. The hollow hull gives a large volume for the mass, so the average density is less than that of water.

  2. 2. The Plimsoll line on a ship shows:

    1. Its greatest cruising speed
    2. The local depth of the sea
    3. Its direction of travel now
    4. Its safe maximum loading level
    Show answer

    Answer: D. The Plimsoll line marks the maximum safe depth to which the ship may be loaded in different kinds of water.

  3. 3. A submarine rises to the surface when it:

    1. Takes water into its ballast tanks
    2. Increases its weight
    3. Blows the water out of the ballast tanks
    4. Stops its engines
    Show answer

    Answer: C. Removing water reduces its weight below the buoyant force, so it rises.

  4. 4. A closed box of mass 4000 kg and volume 8 m³ floats in water. The fraction of its volume that is submerged is:

    1. 0.5
    2. 0.25
    3. 0.8
    4. 1.0
    Show answer

    Answer: A. Average density = 4000 ÷ 8 = 500 kg/m³. Fraction submerged = 500 ÷ 1000 = 0.5.

  5. 5. A ship sails from the sea into a river with less dense water. It will:

    1. Float higher
    2. Float at the same level
    3. Sink a little lower
    4. Rise out of the water
    Show answer

    Answer: C. River water is less dense, so the ship must displace more volume to balance its weight. It sinks a little lower.

Sign in to keep track of the lessons you finish.

Next lesson → Final self-assessment: Pressure

Privacy · Terms · Refunds · Delivery