Revision notes

Sound: Practice

The key points, rules to remember, tables and diagrams from all 9 lessons, on one page for quick revision. To keep a copy, use your browser's Print and choose "Save as PDF".

Lesson 1

Speed of sound and echoes

Echo distance d = vt/2. Minimum distance for a distinct echo is about 17 m in air. Speed: solids > liquids > gases.

— Remember
  • The sound travels to the reflector and back, so halve the total distance.
  • Sound travels fastest in solids and slowest in gases.
  • Speed in air rises with temperature.
Read the full lesson

Lesson 2

Pitch, loudness and decibels

β = 10 log(I/I₀), I₀ = 10⁻¹² W/m². Pitch ← frequency, loudness ← amplitude, quality ← waveform.

— Remember
  • Pitch is frequency, loudness is amplitude, quality is waveform.
  • Decibels are logarithmic: ×10 in intensity is +10 dB.
  • Human hearing is about 20 Hz to 20 kHz.
Read the full lesson

Lesson 3

Resonance in air columns

Closed pipe: f = (2n − 1)v/4L, odd harmonics only. Open pipe: f = nv/2L, all harmonics. Resonance tube: L₂ − L₁ = λ/2.

— Remember
  • Closed pipe: odd harmonics only, fundamental v/4L.
  • Open pipe: all harmonics, fundamental v/2L.
  • The distance between successive resonances is half a wavelength.
Read the full lesson

Lesson 4

Beats and the Doppler effect

f' = f (v ± v_o)/(v ∓ v_s). Moving closer: higher pitch. Moving apart: lower pitch. The source's own frequency does not change.

— Remember
  • Approaching means a higher observed frequency; receding means a lower one.
  • Source speed goes in the denominator, observer speed in the numerator.
  • Beat frequency is the difference between two frequencies.
Read the full lesson

Lesson 5

Vibrating strings and musical instruments

f = (1/2L)√(T/μ). Shorter, tighter or lighter strings sound a higher pitch.

— Remember
  • Pitch rises with tension and falls with length and mass per unit length.
  • Overtones of a fixed string are whole-number multiples of the fundamental.
  • Combine v = fλ, beats, Doppler and pipe formulae in mixed problems.
Read the full lesson

Lesson 6

Wave relations across media and time-gap problems

Frequency stays fixed; speed and wavelength change together. Gap Δt = d ÷ v₁ − d ÷ v₂, so d = Δt v₁v₂ ÷ (v₂ − v₁).

— Rule to remember
  • Same source, same frequency.
  • Wavelength is directly proportional to the speed.
  • The time gap shows the distance when two speeds are known.
Read the full lesson

Lesson 7

Echo problem types: moving observers, moving vehicles and finding the speed

Total path of sound = v × t. For a moving source, add the distance it moves: 2d = vt + (distance moved towards the reflector).

— Rule to remember
  • Echo distance is half the path of the sound.
  • A moving source changes the geometry, not the speed of sound.
  • Two echoes from two surfaces give the separation of the surfaces.
Read the full lesson

Lesson 8

Beats and tuning forks: finding an unknown frequency by waxing and filing

Beats per second = |f₁ − f₂|. Wax lowers the frequency; a file raises it. Fewer beats after the change means the changed fork moved closer to the standard.

— Rule to remember
  • Two candidates come from one beat count; a second measurement picks one.
  • Waxing lowers, filing raises.
  • Beats vanish when the two frequencies are equal.
Read the full lesson

Lesson 9

Pipes, strings and temperature: a mixed problem set

Same length: open pipe is double the frequency of a closed pipe. Closed pipe: odd multiples only. Warm air raises the pitch of a pipe.

— Rule to remember
  • Compare pipes of equal length by the ratio 2 : 1.
  • Odd multiples only for a closed pipe.
  • Pitch of a pipe tracks the speed of sound in the air column.
Read the full lesson

Privacy · Terms · Refunds · Delivery