Revision notes

Units and Measurement: Foundation

The key points, rules to remember, tables and diagrams from all 9 lessons, on one page for quick revision. To keep a copy, use your browser's Print and choose "Save as PDF".

Lesson 1

What is measurement?

Some common quantities and their SI units
QuantitySI unitSymbol
Lengthmetrem
Masskilogramkg
Timeseconds
TemperaturekelvinK
Electric currentampereA

Every measurement = number + unit. Always write both.

— Remember
  • A physical quantity is something that can be measured.
  • A measurement needs a number and a unit.
  • A standard unit must be well defined and the same for everyone.
  • SI is the modern worldwide metric system of units.
Read the full lesson

Lesson 2

Fundamental and derived units

The seven SI base quantities
QuantityUnitSymbol
Lengthmetrem
Masskilogramkg
Timeseconds
Electric currentampereA
TemperaturekelvinK
Amount of substancemolemol
Luminous intensitycandelacd
Common derived units
QuantityFormulaUnit
Arealength × lengthm²
Volumelength × length × lengthm³
Speeddistance ÷ timem/s
Accelerationspeed ÷ timem/s²
Densitymass ÷ volumekg/m³
Forcemass × accelerationkg m/s² = newton (N)
Work or energyforce × distanceN m = joule (J)
Pressureforce ÷ areaN/m² = pascal (Pa)

Fundamental units stand alone; derived units are made from them. Seven base units in SI.

— Remember
  • Seven base quantities: length, mass, time, current, temperature, amount of substance, luminous intensity.
  • Derived units come from base units by multiplication or division.
  • Newton, joule and pascal are named derived units.
Read the full lesson

Lesson 3

Measuring length, mass and time

Least count = pitch ÷ number of circular divisions (screw gauge). Reading = main scale + coinciding division × least count.

— Formula
  • Least count is the smallest value an instrument can measure.
  • Vernier callipers: reading = main scale + vernier division × least count.
  • Screw gauge: least count = pitch ÷ circular divisions.
  • Subtract positive zero error from the observed reading.
Read the full lesson

Lesson 4

Significant figures and errors

Percentage error = (absolute error ÷ true value) × 100.

— Formula
  • Leading zeros are not significant; zeros between digits are.
  • Add or subtract by decimal places; multiply or divide by significant figures.
  • Percentage error = absolute error ÷ true value × 100.
  • Systematic errors are one-sided; random errors vary.
Read the full lesson

Lesson 5

Prefixes, conversions and dimensions

Common prefixes
PrefixSymbolFactor
kilok10³
centic10⁻²
millim10⁻³
microµ10⁻⁶
nanon10⁻⁹
megaM10⁶
gigaG10⁹

km/h to m/s: multiply by 5/18. m/s to km/h: multiply by 18/5. Only quantities with equal dimensions can be added.

— Remember
  • Prefixes are powers of ten: kilo 10³, milli 10⁻³, micro 10⁻⁶.
  • km/h × 5/18 = m/s.
  • Dimensions of force: [M L T⁻²]; energy: [M L² T⁻²].
  • Both sides of a correct equation must have equal dimensions.
Read the full lesson

Lesson 6

Systems of units: CGS, MKS, FPS and SI

The four systems you will meet
SystemLengthMassTimeUnit of force
CGScentimetre (cm)gram (g)second (s)dyne = g cm/s²
MKSmetre (m)kilogram (kg)second (s)newton = kg m/s²
FPSfoot (ft)pound (lb)second (s)poundal = lb ft/s²
SImetre (m)kilogram (kg)second (s), plus ampere, kelvin, mole, candelanewton (N)

1 N = 10⁵ dyne. 1 J = 10⁷ erg. 1 g/cm³ = 1000 kg/m³. Bigger unit, smaller number.

— Rule to remember
  • A system of units is a set of base units from which all other units are built.
  • CGS uses cm, g, s; MKS and SI use m, kg, s; FPS uses ft, lb, s.
  • 1 N = 10⁵ dyne and 1 J = 10⁷ erg.
  • SI is preferred because it is international, decimal and coherent.
Read the full lesson

Lesson 7

Special units for very large and very small distances

Special units at a glance
UnitSymbolValue in metresUsed for
Astronomical unitAUabout 1.5 × 10¹¹Distances in the solar system
Light-yearlyabout 9.46 × 10¹⁵Distances to stars
Micronµm10⁻⁶Cells, bacteria, thin wires
Nanometrenm10⁻⁹Wavelength of light
AngstromÅ10⁻¹⁰Size of atoms
Fermifm10⁻¹⁵Size of nuclei

1 Å = 10⁻¹⁰ m; 1 µm = 10⁻⁶ m = 10⁴ Å; 1 fm = 10⁻¹⁵ m; a light-year is a unit of distance.

— Rule to remember
  • The AU, light-year and parsec measure large distances; the micron, nanometre, angstrom and fermi measure small ones.
  • Every special unit is a power of ten times the metre (or a fixed number of metres for the astronomical ones).
  • A light-year is a unit of distance, not of time.
  • To convert between two small units, divide their values in metres.
Read the full lesson

Lesson 8

Scientific notation and order of magnitude

Multiplication, division and powers
OperationRuleExample
Multiply10ᵐ × 10ⁿ = 10ᵐ⁺ⁿ10³ × 10⁴ = 10⁷
Divide10ᵐ ÷ 10ⁿ = 10ᵐ⁻ⁿ10⁶ ÷ 10² = 10⁴
Power(10ᵐ)ⁿ = 10ᵐⁿ(10²)³ = 10⁶
Negative power10⁻ⁿ = 1 ÷ 10ⁿ10⁻³ = 0.001

Scientific notation: a × 10ⁿ with 1 ≤ a < 10. Multiply: add powers. Divide: subtract powers. Order of magnitude: round to the nearest power of ten.

— Rule to remember
  • Scientific notation keeps one non-zero digit before the decimal point.
  • Add powers when multiplying powers of ten and subtract them when dividing.
  • The order of magnitude is the nearest power of ten.
  • Differences in order of magnitude tell you quickly how many times larger one quantity is than another.
Read the full lesson

Lesson 9

Dimensional formulae step by step

Dimensional formulae worked out
QuantityDefining equationDimensions
Arealength × length[L²]
Volumelength × length × length[L³]
Densitymass ÷ volume[M L⁻³]
Speedlength ÷ time[L T⁻¹]
Accelerationspeed ÷ time[L T⁻²]
Forcemass × acceleration[M L T⁻²]
Work or energyforce × distance[M L² T⁻²]
Powerwork ÷ time[M L² T⁻³]
Pressureforce ÷ area[M L⁻¹ T⁻²]
Frequency1 ÷ time[T⁻¹]

To find dimensions: write the defining formula, replace each symbol by its dimensions, and add or subtract the powers. Ratios of like quantities have no dimensions.

— Rule to remember
  • Dimensions are the powers of [M], [L] and [T] that build a quantity.
  • Numbers, angles and ratios of like quantities are dimensionless.
  • Quantities such as impulse and momentum can share the same dimensions.
  • A formula that gives the wrong dimensions cannot be correct.
Read the full lesson

Privacy · Terms · Refunds · Delivery