• Foundation
  • About 14 min
  • 5 practice questions

Measuring length, mass and time

Learn how the metre scale, vernier callipers and screw gauge work, what least count means, and how to read them.

If something looks wrong, please tell us.

A ruler can measure to the nearest millimetre, but a thin wire needs a finer instrument. In this lesson you will learn the idea of least count and how to read a vernier callipers and a screw gauge.

Least count

The least count is the smallest value an instrument can measure accurately. A metre scale has divisions of 1 mm, so its least count is 1 mm = 0.1 cm. A smaller least count means a more precise instrument.

Vernier callipers

A vernier callipers has a main scale and a sliding vernier scale. Its least count is the difference between one main scale division (MSD) and one vernier scale division (VSD). Commonly 1 MSD = 1 mm and 10 VSD = 9 mm, so least count = 1 mm − 0.9 mm = 0.1 mm = 0.01 cm.

  1. Note the main scale reading just before the zero of the vernier scale.
  2. Find which vernier line coincides exactly with a main scale line.
  3. Total reading = main scale reading + (coinciding vernier division × least count).

Screw gauge

A screw gauge measures very small thicknesses such as a wire. The pitch is the distance the screw moves in one full turn. Least count = pitch ÷ number of divisions on the circular scale. Total reading = main scale reading + (circular scale division × least count).

Worked examples

Example 1. Vernier callipers with least count 0.01 cm. Main scale reading is 2.3 cm and the 6th vernier division coincides. Reading = 2.3 + 6 × 0.01 = 2.36 cm.

Example 2. A screw gauge has pitch 1 mm and 100 circular divisions. Least count = 1 ÷ 100 = 0.01 mm. If the main scale reads 3 mm and the circular scale reads 27, the diameter = 3 + 27 × 0.01 = 3.27 mm.

Example 3 (zero error). If the callipers read 0.02 cm when closed, this is a positive zero error. A measured value of 2.36 cm must be corrected: 2.36 − 0.02 = 2.34 cm.

Least count = pitch ÷ number of circular divisions (screw gauge). Reading = main scale + coinciding division × least count.

— Formula

Key takeaways

  • Least count is the smallest value an instrument can measure.
  • Vernier callipers: reading = main scale + vernier division × least count.
  • Screw gauge: least count = pitch ÷ circular divisions.
  • Subtract positive zero error from the observed reading.

Check your understanding

  1. 1. A metre scale is marked in millimetres. What is its least count?

    1. 1 cm
    2. 0.1 cm
    3. 0.01 cm
    4. 0.001 cm
    Show answer

    Answer: B. The smallest division is 1 mm, so the least count is 1 mm = 0.1 cm.

  2. 2. In a vernier callipers, 1 main scale division is 1 mm and 10 vernier divisions equal 9 mm. What is the least count?

    1. 0.1 mm
    2. 0.9 mm
    3. 1 mm
    4. 0.01 mm
    Show answer

    Answer: A. 1 VSD = 9 ÷ 10 = 0.9 mm. Least count = 1 MSD − 1 VSD = 1 − 0.9 = 0.1 mm.

  3. 3. A vernier callipers has least count 0.01 cm. The main scale reading is 3.4 cm and the 7th vernier division coincides with a main scale line. What is the reading?

    1. 3.47 cm
    2. 3.41 cm
    3. 3.407 cm
    4. 10.4 cm
    Show answer

    Answer: A. Reading = main scale reading + coinciding division × least count = 3.4 + 7 × 0.01 = 3.4 + 0.07 = 3.47 cm.

  4. 4. A screw gauge has a pitch of 1 mm and 50 divisions on its circular scale. What is its least count?

    1. 0.05 mm
    2. 0.02 mm
    3. 0.5 mm
    4. 50 mm
    Show answer

    Answer: B. Least count = pitch ÷ number of circular divisions = 1 mm ÷ 50 = 0.02 mm.

  5. 5. A vernier callipers has a zero error of +0.04 cm. It reads 6.38 cm for a rod. What is the true length?

    1. 6.42 cm
    2. 6.38 cm
    3. 6.34 cm
    4. 6.30 cm
    Show answer

    Answer: C. A positive zero error is subtracted: 6.38 − 0.04 = 6.34 cm.

Sign in to keep track of the lessons you finish.

Next lesson → Significant figures and errors

Privacy · Terms · Refunds · Delivery