• Practice
  • About 13 min
  • 5 practice questions

Industrial pollution and control of environmental degradation

Describe how industries pollute air, water, land and with noise, including thermal pollution, and explain the measures for controlling it, including the three stages of effluent treatment.

If something looks wrong, please tell us.

By the end of this lesson you can

  • Name the four types of pollution caused by industry and their sources.
  • Explain thermal pollution of water and its effect on aquatic life.
  • Describe the three stages of treating industrial effluents.
  • Suggest ways to reduce air, water and noise pollution from factories.

Industries drive growth, but the textbook insists that the pollution and environmental damage they cause cannot be overlooked. Thermal power plants are counted among polluting industries too. This lesson covers the four kinds of industrial pollution and how they can be controlled, aiming at sustainable development - growth that also protects the environment.

Four types of industrial pollution

Industrial pollution: causes and effects
TypeMain causesEffects
AirUndesirable gases like sulphur dioxide and carbon monoxide; particles of dust, spray, mist and smoke from smelting plants and burning fossil fuels; toxic gas leaksHarms human health, animals, plants, buildings and the atmosphere
WaterOrganic and inorganic wastes and effluents from paper, pulp, chemical, textile, dyeing, refinery, tannery and electroplating units - dyes, acids, salts, heavy metals like lead and mercuryPoisons rivers and the life in them; unsafe water
Land (soil)Dumping of glass, harmful chemicals, effluents, packaging, salts and garbage; solid wastes such as fly ash, phospho-gypsum and steel slagSoil becomes useless; rain carries pollutants down into groundwater
NoiseIndustrial and construction machinery, generators, saws, pneumatic and electric drillsIrritation, stress, hearing loss, higher heart rate and blood pressure

The textbook asks students to recall the Bhopal gas tragedy (1984) as an example of how hazardous a toxic gas leak can be, with long-term effects. It also notes that wastes from nuclear facilities can cause cancers and birth defects.

Thermal pollution

Thermal pollution of water happens when hot water from factories and thermal power plants is drained into rivers and ponds before it has cooled. Warm water holds less dissolved oxygen, so fish and other aquatic life suffer or die.

Controlling water pollution

The textbook warns that every litre of industrial waste water pollutes about eight times as much fresh water. Suggested remedies:

  • Use less water by reusing and recycling it through two or more stages.
  • Harvest rainwater to meet water needs.
  • Treat hot water and effluents before releasing them.
  • Regulate by law industries overdrawing groundwater where reserves are threatened.

Three stages of treating industrial effluents

  1. Primary treatment Mechanical: screening, grinding, flocculation (clumping) and sedimentation (settling).
  2. Secondary treatment Biological: microbes break down the organic matter.
  3. Tertiary treatment Biological, chemical and physical processes; waste water is recycled.

Controlling air and noise pollution

  • Fit smoke stacks with electrostatic precipitators, fabric filters, scrubbers and inertial separators to trap particles.
  • Use oil or gas instead of coal to reduce smoke.
  • Fit generators and machinery with silencers; redesign machines to save energy and cut noise.
  • Use noise-absorbing materials, and give workers earplugs or ear protectors.

Worked example 1: diagnose the pollution

A village pond near a power station is warm and its fish are dying, though no chemicals are found. Cause: hot water released straight into the pond - thermal pollution. Remedy: cool the water in cooling towers or ponds before release. A second village's well water turns coloured near a dyeing unit: effluents dumped on land seeped into the ground - soil and groundwater pollution; remedy: treat effluents in three stages before discharge.

Worked example 2: using the 'eight times' warning

Taking the textbook's warning at face value, if a small unit discharges 500 litres of untreated waste water a day, about 500 × 8 = 4,000 litres of fresh water could be polluted each day. Recycling half its water would cut the discharge to 250 litres, and the fresh water affected to about 250 × 8 = 2,000 litres.

Four pollutions: air, water, land, noise. Effluent treatment: primary (mechanical) -> secondary (biological) -> tertiary (biological + chemical + physical, recycling).

Key takeaways: Industries pollute air, water, land and with noise; hot water discharge causes thermal pollution. Remedies include water recycling, rainwater harvesting, three-stage effluent treatment, legal limits on groundwater use, particle-trapping devices, cleaner fuels and silencers. Development must go together with environmental care.

Check your understanding

  1. 1. Thermal pollution of water is caused by:

    1. releasing hot water from factories and power plants before it cools
    2. dumping plastic bags
    3. loud machines near rivers
    4. spraying pesticides on crops
    Show answer

    Answer: A. The textbook defines thermal pollution as hot water from factories and thermal plants drained into rivers and ponds before cooling. Warm water holds less oxygen, which harms aquatic life.

  2. 2. Which treatment stage uses screening, grinding, flocculation and sedimentation?

    1. Secondary
    2. Tertiary
    3. Primary
    4. None of these
    Show answer

    Answer: C. Primary treatment is mechanical and includes screening, grinding, flocculation and sedimentation. Secondary is biological; tertiary combines biological, chemical and physical processes.

  3. 3. Which device helps reduce particles in factory smoke?

    1. Silencer
    2. Electrostatic precipitator
    3. Rainwater tank
    4. Earplug
    Show answer

    Answer: B. Electrostatic precipitators, fabric filters, scrubbers and inertial separators fitted to smoke stacks trap particulate matter. Silencers and earplugs deal with noise.

  4. 4. Fly ash, phospho-gypsum and iron and steel slag are major examples of:

    1. noise pollutants
    2. harmful gases
    3. renewable energy sources
    4. solid industrial wastes
    Show answer

    Answer: D. The textbook names fly ash, phospho-gypsum and iron and steel slags as the major solid wastes in India. Dumped on land, they pollute the soil.

  5. 5. Which is a health effect of noise pollution mentioned in the textbook?

    1. Hearing impairment and raised blood pressure
    2. Better sleep
    3. Stronger bones
    4. Clearer eyesight
    Show answer

    Answer: A. The textbook says noise causes irritation, anger and stress and can cause hearing impairment, increased heart rate and blood pressure.

Privacy · Terms · Refunds · Delivery